Reviews
Hook was not needed.
Used on GPZ900R. The large hooks are not suitable for motorcycles with hooks, but the large mesh of Rubber is the best choice. View detail
Analog GPS..
I took a risk with this item as the only place to put it was on a non-magnetic metal instrument screen, and quite close to the instrumentation too. Unfortunately this does mean it does get occasional interference from magnetic fields on the bike. This isn't a big deal for me as I mainly just want to know which general direction my bike is travelling when in unfamiliar territory. If there was one thing this compass lacks, that would be a glow in the dark feature; which it doesn't have..hence it's useless when on the move at night. View detail
It looks good
Mounting ScrewQuantity clamping Number:Just remove the 2pc.
Therefore, 15 to 20 minutes of your time is all that is needed.
I chose Black because the surroundings are Black, but it is not noticeable.
There is a sense of unity.
The seat shape inevitably gapes in the front.
This position was where we wanted it.
This time, when I opened the box, I found the Package in the upper part of the box.
It was off. It was open.
I was disappointed thinking it was a return product. I also inspected the product when it was shipped.
I wonder how they are doing.
The product was fine, but...
View detail
It's not bad, but there's no outstanding ingenuity or functional beauty.
I think this is a dead feature, although it is mentioned that it can be adjusted according to the Bottle width.
The construction of the Screw part seems to loosen easily if it is tightened frequently and repeatedly, so it cannot be used extensively.
The holder is recommended to be semi-fixed with a width that allows a 500ml bottle to fit in the limit.
If possible, I would have liked to see consideration such as a strong Spring type to make it easier to adjust the width.
Also, when installing a Short Screen on a car body or near the Grip, the Tumbler of ConvenienceCoffee, for example, must be careful because the container, which has lost its contents and become light, can easily be blown away by the driving wind, effectively littering the area.
I must say that if the Holder is not able to hold it securely until you throw it in the trash yourself, it is not a very good drink holder.
I would like to see a mechanism to keep Hold on the Bottle.
Also, if the Handlebar is installed as is, it will scratch the paint on the Handlebar, so I think it should at least come with a weather-resistant rubber plate.
After about three years of use, there has been almost no deterioration, and the product seems to be made to be resistant to rust and deterioration, so the durability aspect is promising.
View detail
Loader Hook
The usability and texture were also good. View detail
It was usually good.
The iron core was in the Hook, and it was usually good. View detail
Items needed to secure a bag to a sports type motorbike
Fewer and fewer modern motorcycles have loader hooks. (There may be a hole in the front side for fixing the belt behind the tandem footpeg, but in many cases there is no place to fix the belt in the rear side.
This Plate hook makes it easy and convenient to secure the Belt. It looks inconspicuous, so there is no problem even if you leave it attached.
View detail
Stable loading
[How is it used?
I wanted to carry a large luggage for a long distance touring, so I chose this one to be stable and secure.
Was the one you received as per Image?
Image is as is.
Was the installation difficult?
It is easy to use, as it is only co-tightened to the License Plate.
How was your experience with it?
There are more physical places to hook up, so fixing can be done easily and reliably.
[Included Parts:were they on?
There is none
[Was there anything that disappointed you?
The quality of the product was also good.
Other items that would be helpful
Installation Point or hang
It may not be possible to assemble if the Bolt has already been assembled to Bolt or if the Number Bolt is too short.
View detail
Since he heard that it is durable that it is hard to be extended, it purchased. Although the rain jacket is bound to the tandem seat, since a square measure seldom spreads even if it fastens strongly, I think that it is strong on elongation. Since
Since he heard that it is durable that it is hard to be extended, it purchased.
Although the rain jacket is bound to the tandem seat, since a square measure seldom spreads even if it fastens strongly, I think that it is strong on elongation.
Since the hook of the net changed the location by itself, the location of the hook hook of a motorcycle did not worry it.
Although M was purchased in rain jackets, there is a margin of the grade which can stack an one more piece rain jacket.
It is good to be able to respond, even if loads increase in number suddenly.
Although it is used for two years, it still uses.
View detail
Cute.
I use it to cover the SeatBack.
I use it very hard on the highway to keep my luggage from flopping around, and I tie my laundry to it when I go down the road.
View detail
For one Helmet
[How is it used?
I bought it because I wanted to go touring on a Motorcycle with Carrier installed.
We envisioned a small souvenir or long distance Touring.
Was the one you received as per Image?
I purchased the L Size
There was an Image for one Helmet.
How was your experience with it?
As shown in the image, it conveniently holds one Helmet.
The claws also seem to be strong with the genus Gold inside.
[Points to note]
I am a little worried about the installation if the luggage is smaller than the size.
How did it compare to other products?
Other items that would be helpful
It seems to be more reliable than the cheap ones available at mass retailers.
View detail
Also helps prevent deformation of the License Plate
I purchased Repeat following MT−09. I installed it for a hard-bound Hook when I have a little luggage on the road. It also helps to prevent deformation of the License Plate. I would be happy if the price is a little lower...so I gave it a Cost performance of 3. View detail
License Plate Protection
When I remove the seat on a weekend ride, the seat gets caught on the license plate quite a bit. "Won't you bend the License Plate someday?" I was wondering.
I installed the License Plate with confidence because there is an Instruction Manual with Large and strong though the regulation became severe recently.
Body is Quantity:Pair (for Left and Right) There was a place to hook up the Hook to, but I don't plan to use it. "Well, it might come in handy for something." and I think it's part of Design.
It seems to be strong with a thick plate, and installation is also easy by removing the screw of the license plate once and tightening it together.
Recommendation to License Plate protection.
View detail
It's strong, solid and easy to use. But depending on the Motorcycle…
The Plate is thick and I thought it would not bend even if I hooked the Touring net or Belt.
I think that even a beginner can do it with only one Driver because the installation is only to remove the License Plate and to put it between the Mounting Base.
However, since the license plate is attached with Bolt and Nut, it may be difficult to install depending on the car model because the Nut may be in a position where you can't put your fingers (mine was exactly like that).
I used it for Touring immediately, and Seat bag was fixed firmly, and it was quite good.
However, on my Motorcycle, the License Plate is attached to the Swing Arm, so even if I fix it Firmly, the suspension sinks when I sit down, so it looks a bit loose. I don't have any problems with riding, and I don't have to worry too much about the seat bag shifting, but I thought I'd write this to help others who have the same problem.
View detail
Maybe we should also get Bolt?
I'm very happy with it, but the Bolt that came with it was too short to stop when I put it on, so I had to stop it.
Just tuck it in! I'm a little disappointed because it said something like….
And when I finished and looked at it from the front, it was close to one side. (Lol)
Put it back on again.
I should have done it when there was daylight.
When I looked at other reviews later, it said that Bolt was still short.
As for the important product, the License Plate has become bulky and is nice.
View detail
If you don't use a seat bag, this is the one.
It is recommended for fixing your bag and other items.
Seat bag is easy to use, but expensive to buy …
It is elastic and has enough fixing power.
View detail
It's handy to have!
My MT−09 does not have a Hook and I was having difficulty securing my luggage. So I installed this product.
It can also be used to attach the SeatBack's fixing strap without any problems.
It also helps when you have more luggage.
It is a convenient product to have and I am satisfied with it.
It would be nice if it was a little cheaper if I wanted.
View detail
It's a big help when you need it.
The MT-09 doesn't have a Hook so I installed this product along with the Plate hook.
When you're on the road and have more luggage, the more Hooks you have, the better.
A little cheaper would be nice
View detail
bundle of goods
Tent, Matte, sleeping bag, Lantern, Peg, Peg hammer, etc... It was good to be able to put them all together. View detail
It'll stop.
Unlike the standard rubber strap, it holds my luggage securely in place. I often go on long distance touring, so it is safe. View detail