Reviews
No longer a Camping necessity
First of all, it makes a big difference in loading. I was fooling around with this little Hook at a motorcycle supply store, but after I bought it, I wished I had bought it sooner. I use Workman's Waterproof Traveling BagBack instead of the Motorcycle CampingBack when I go touring and it is very stable and secure. I have three motorcycles and I have used it on all of them. It does not detract from their appearance at all and is so convenient that I would like it to be OEM equipment now. View detail
I use it to add Hook to License Plate.
I use this product to add a Hook to my License Plate. 6Millimeter screws make it easy to install on most Motorcycle License Plates. View detail
Used to add Loading Hook.
This product is used for STREET TRIPLE without Loading Hook, and it is easy to work with Adhesive Tape! View detail
It is good for carrying large luggage for camping touring.
This product is good for carrying large luggage for camping touring. It is long enough to hold large luggage and the green light color will create a camp-two mood! View detail
For one Helmet
[How is it used?
I bought it because I wanted to go touring on a Motorcycle with Carrier installed.
We envisioned a small souvenir or long distance Touring.
Was the one you received as per Image?
I purchased the L Size
There was an Image for one Helmet.
How was your experience with it?
As shown in the image, it conveniently holds one Helmet.
The claws also seem to be strong with the genus Gold inside.
[Points to note]
I am a little worried about the installation if the luggage is smaller than the size.
How did it compare to other products?
Other items that would be helpful
It seems to be more reliable than the cheap ones available at mass retailers.
View detail
Convenient to have
Convenient for buying souvenirs or extra luggage while touring.
When my luggage does not fit into the Bag, I use this Net to secure it and carry it.
The Rear Carrier can also be used to secure luggage when going camping, etc.
It is useful.
Net, so if you put a wet hand towel between them, it will dry quickly.
Essential items for camping touring.
View detail
The clasp in the middle is Point.
Compared to other similar products, the middle clasp is made of a square rubber. The hook is also steel and thin, making it easy to hook in tight spaces. View detail
Products with a little Habit
Used as Loading Hook for Every Van.
The Hook section is reluctant to move when tightened, so it does not move unnecessarily when not in use.
If there is an existing screw hole, there is no problem, but if you have to drill a hole to install it, it is not a problem.
It seems that there is a problem with the strength of the base material, so it is better to reinforce it with a plate, etc.
View detail
Also helps prevent deformation of the License Plate
I purchased Repeat following MT−09. I installed it for a hard-bound Hook when I have a little luggage on the road. It also helps to prevent deformation of the License Plate. I would be happy if the price is a little lower...so I gave it a Cost performance of 3. View detail
Good item.
good point
Aluminum and light weight.
It's a thick plate, and it's well.
I can't get the hook on the touring net to come off.
License Plate "Bending Prank." This will help prevent the
The design is also good and refreshing.
A bad point
None.
View detail
It is cosy and very durable.
I use it for long touring and other long distance rides. It has been almost five years since I started using it, but it still holds my luggage firmly in place without breaking or anything. The size is LL, but as the saying goes, Large is as good as Small, so if you are confused about the size of your touring net, choose the large one. If you keep it in your tandem seat, you can secure your luggage even in an emergency. View detail
It's pretty sturdy and discreet, which is GOOD.
The XSR900 does not have a carrier, so I bought this to install a seat bag.
The steel plate is surprisingly thick and solid, and with the OEM mounting bolt, it is Limit length, so you may want to replace it.
I like the fact that it is not too noticeable when not in use.
View detail
Must-have items for seat bag loading
I bought this when I started camping touring.
Installation is super easy, just remove the bolt on the license plate and tighten it together.
I used it to load the Tanax Camping seat bag2 and Side bagGT, and the Plate part did not rattle or come off, and I was able to fix it stably.
This is a very good recommendation for those who use seat bags or side bags.
View detail
Neat Design and good functionality.
I put on the REBEL250 with the Grab Bar Carrier of DAYTONA, and I put on the Touring Seat BagPRO of Henry beguine, but the belt buckle of Seat bag was not well positioned, and I could not fix it well, so I bought this one.
The design is clean and unobtrusive, even when not in use.
View detail
It was good in terms of Size.
In the photo, I put a Cushion which was nearby. It looks like there is enough room for about 3 Cushion.
I'm glad the Net was sturdy and came with lots of Hooks!
View detail
License Plate Protection
When I remove the seat on a weekend ride, the seat gets caught on the license plate quite a bit. "Won't you bend the License Plate someday?" I was wondering.
I installed the License Plate with confidence because there is an Instruction Manual with Large and strong though the regulation became severe recently.
Body is Quantity:Pair (for Left and Right) There was a place to hook up the Hook to, but I don't plan to use it. "Well, it might come in handy for something." and I think it's part of Design.
It seems to be strong with a thick plate, and installation is also easy by removing the screw of the license plate once and tightening it together.
Recommendation to License Plate protection.
View detail
If you're going to put a TouringBack on it, by all means.
This is a valuable part for the SEROW that has few places to hang cargo.
Since it is fixed firmly, there is no problem even if you fix TouringBack languidly.
View detail
It's strong, solid and easy to use. But depending on the Motorcycle…
The Plate is thick and I thought it would not bend even if I hooked the Touring net or Belt.
I think that even a beginner can do it with only one Driver because the installation is only to remove the License Plate and to put it between the Mounting Base.
However, since the license plate is attached with Bolt and Nut, it may be difficult to install depending on the car model because the Nut may be in a position where you can't put your fingers (mine was exactly like that).
I used it for Touring immediately, and Seat bag was fixed firmly, and it was quite good.
However, on my Motorcycle, the License Plate is attached to the Swing Arm, so even if I fix it Firmly, the suspension sinks when I sit down, so it looks a bit loose. I don't have any problems with riding, and I don't have to worry too much about the seat bag shifting, but I thought I'd write this to help others who have the same problem.
View detail
I used MOTOFIZZ's Plate hook (lol)
Slant License Bracket of DAYTONA and also Slant License Bracket of DAYTONA (OEMFender only) and Plate hookMF4612 of Moto fizz were used in combination. and Moto fizz Plate hook MF4612.
MOTOFIZZ MF4728 is machined by Leutor in the upper square hole. in the upper square hole.
Plate hookMF4612 with a Red Reflector (purchased at Webig) for a USDM look.
Please note that it is a violation to use this installation method on vehicles first registered on or after October 1, 2021.
My vehicle is registered in September 2021, so it's not applicable (laughs).
View detail
Tanax's Plate hook...
I used it in a different way than it was meant to be used.
I processed the hole to hang the Hook on the top so that the License Plate can be shifted to the bottom.
View detail