Reviews
It peels right off.
I stuck it on the Helmet in Upper Cowl of NC750X, but it peeled off soon due to the bumps.
(Of course, degreasing before applying and crimping afterwards)
The soft material makes it easy to apply, but I wish the adhesive was a little stronger.
I think there is no problem if it is a flat part or a curved part.
View detail
Design makes it possible to choose any motorcycle for installation
I used it to protect my tank from scratches. It looks large in the picture, but the actual product is smaller than I expected, and my personal preference would have been for it to be longer horizontally.
The texture is good, but it was used with a little processing for the reasons mentioned above.
Because of its thickness, the adhesive strength loses its ability to peel off when the part has a tight bend.
I think it would be better if it was thinner, a little larger, and could be attached to any curved surface.
View detail
scratch-resistant
I bought this product to prevent scratches on my tank, and it looks good. View detail
Used to prevent Tank's Wound
I installed it to prevent Tank's Small Wound.
I use it only with Magnet, but it can be used without being shifted. I like it like Design.
View detail
I bought it for the protection of Tank by purchasing a new car.
Since I sworn to Motorcycle more than PCX this time, since Tank is in Body so far it has nothing to do with scratches, but this time I become American Type and Tank sits on Seat my crotch hits Jacket's Fastener It seems that the wound is going to hurt so I bought it for scratch prevention.
I will write an impression to use easily.
1. Quantity : 1 Set of 3pcs. In Quantity : 1pc. There is more freedom than things Quantity : 1pc. I'm worried about whether to put it in one place or two trials
2 Although it is a method to paste first, usually there are Seal mounts on the back, but this product is a pasting method to peel off as it is
3, I was worried whether reassignment would benefit when a failure occurred, but I was thinking too much It was possible to do it again several times
4. Large Small It is possible to prevent it in a wide range since it can stick the position where it sticks and it sticks.
5. The surface is shiny and beautiful after pasting
My Motorcycle seems to be slightly floating on the Seat side but I managed to affix it because I managed to stick it later but I am worried that it will not peel off, but the price is reasonable, so I think whether Cover can be re-purchased when it gets rid of it someday.
View detail
Classic MOTOFIZZ Tank Pad
Simple with a design that does not change from old days.
It is Exactly for a slightly old-fashioned car model like RGV.
The corner floats, but since it is cheap in price it bought it as a disposable feeling.
View detail
Satisfied
I bought it for Aluminum Tank scratch prevention.
It was a cold season in Parkari, not to mention surface degreasing, so it got soft as soon as it warmed up for a couple of seconds with Dryer, and it could be stuck easily with some curved parts.
I think that the followability to curvature is a degree problem, but because it is divided into three into three, it is better to paste separately.
It is satisfying and satisfying as expected without peeling appearance.
View detail
Clear
This time I attached Clear for the first time.
Until then, Material : It was Carbon Style.
This time I chose Clear, I feel a lot better.
The price was also cheap and it was good.
There is thickness, too..
It is good to adjust the pasting interval.
Because you can see inside only Clear,
If you hold down firmly and remove the air as much as possible, it may seem a little messy.
View detail
It's cheap.
It is cheap, but I feel like I'm already peeling off from a sharp Cut part - - -.
"Gew" And when we constrained it, it stuck snugly, but where we stuck (Such as where you are bent) Let's be careful to paste it on.
View detail
It is a matter of mood.
I ride SEROW, but when I notice it suddenly I scratched the Tank in the part of my groin to Wound - - - It is commonplace to say that it is full of scratches in the exterior because it is obviously inconvenient, but when it comes to somehow, it becomes matter of concern unnecessarily. Purchase this with just a ProtectSeat looking a bit better.
Since it is only the necessary part, only one out of 3 pieces, and stuck it upside down. Well. It may have become an unnatural and strange look - - -
View detail
It pastes up firmly and seldom spoils the original Design. Since the price is also cheap, I think that this is enough.
It pastes up firmly and seldom spoils the original Design.
Since the
price is also cheap, I think that this is enough.
View detail
Since it was a bargain sale, it purchases. It was lucky. He bought the reserve of the Tank pat.
Since it was a bargain sale, it purchases.
It was lucky.
He bought the reserve of the
Tank pat.
View detail
With the Magnet, since a feeling of a Fit was not quite satisfactory in its own car of its, specification is carried out to it using an attached Seal. With that which is said to the direction which seldom spoiling a Design likes?
With the Magnet, since a feeling of a Fit was not quite satisfactory in its own car of its, specification is carried out to it using an attached Seal.
With that which is said to the direction which seldom spoiling a Design likes?
View detail
[Webike Monitor] Although he bought division type for the first time, it is stuck simply and also it is [ the range to protect ] pleased with the point which can be adjusted by itself. However, since it is difficult to restick once it sticks, it posi
[Webike Monitor] Although he bought
division type for the first time, it is stuck simply and also it is [ the range to protect ] pleased with the point which can be adjusted by itself.
However, since it is difficult to restick once it sticks, it positions firmly, and after degreasing, it is necessary to stick.
View detail
using it for CBR250R -- -- since ♪ adhesive power with which CBR1000RR was also equipped since quite good touch was equipped does not separate easily strongly, either and guards a Tank firmly, it is pleasing. It is also good not to break
using it for CBR250R --
-- since ♪
adhesive power with which
CBR1000RR was also equipped since quite good touch was equipped does not separate easily strongly, either and guards a Tank firmly, it is pleasing.
It is also good not to break down the Design of the
Motorcycle, either (o^omega^o).
View detail
It attached to ZRX1200DAEG. A tank gets damaged and it is prevention. It was good to use this pad although many things were looked for in the thing inconspicuous if possible. Since black was chosen, it assimilates to the black coloring of a ta
It attached to ZRX1200DAEG.
A tank gets damaged and it is prevention.
It was good to use this pad although many things were looked for in the thing inconspicuous if possible.
Since black was chosen, it assimilates to the black coloring of a tank and is not conspicuous.
It only sticks with the double-stick tape to which the pad adheres.
It is recommended.
View detail
Ideas which were excellent to make it transparent in order not to hide the color of a tank. They are a metallic, a maziora, and a place to use Colet for very much if the color of the tank is pleasing even if that is not right. Moreover, since it w
Ideas which were excellent to make it transparent in order not to hide the color of a tank.
They are a metallic, a maziora, and a place to use Colet for very much if the color of the tank is pleasing even if that is not right.
Moreover, since it will become long perpendicularly if three all are used, only two have been stuck.
This degree of freedom is the good place 笙ェ of a separate type.
View detail
It is a pad safe for the time being. since a design is also simple, it suits anything -- I think that it is. It is expensive. I think that what is necessary is just cheap to a slight degree.
It is a pad safe for the time being.
since a design is also simple, it suits anything -- I think that it is.
It is expensive.
I think that what is necessary is just cheap to a slight degree.
View detail
Since it was disagreeable that a tank pad was strangely conspicuous, it wavered in illusion and chose the clear of TANAX. Since it is not too large and the design of a tank is not spoiled, I choose a clear and think that it was really good. About
Since it was disagreeable that a tank pad was strangely conspicuous, it wavered in illusion and chose the clear of TANAX.
Since it is not too large and the design of a tank is not spoiled, I choose a clear and think that it was really good.
About attachment, cautions are merely quite required.
In my case, the first sheet was removed carelessly, and the fingerprint attached it to the adhesive part of the pad, and it was out in one shot.
The pad of three sheets is two sheets by favor.
This is pleasing now.
View detail
In order to protect a beautiful tank, it purchased first of all. A size and appearance suit the bol d'or of my CBX color very well. since the character is contained in one of three sheets, or it stretches it where -- even when -- I think that atmo
In order to protect a beautiful tank, it purchased first of all.
A size and appearance suit the bol d'or of my CBX color very well.
since the character is contained in one of three sheets, or it stretches it where -- even when -- I think that atmosphere also changes delicately.
Privately, it is large satisfaction.
View detail