Reviews
Style is very good, but...
I fell in love with Style and bought it!
The handlebar area looks very sharp and good, but the narrower width of the upper and lower sections makes it harder to see than the OEM.
In my BOULEVARD, the vibration causes the rear vehicle to shake when the speed exceeds 70 km/h.
Blue lens is quite good.
View detail
It was not sold at Home center.
[How is it used?
KTM Motorcycle's Right SideMirror is Opposite Thread ScrewSpec. just like Yamaha's. I decided to use the Tanax Off-set Holder 45 (product number:SA-25) to install the Mirror on my 390DUKE as an Other Brand Product, so I needed an M10 Reverse Screw bolt to install it.
Was the one you received as per Image?
It is very helpful that M10 reverse screw bolt is not sold at ordinary home centers.
Was the installation difficult?
To prevent the bolt from loosening, Screw lock fluid was used to install the bolt. Also, to prevent water from accumulating in the bolt's hexagonal hole and rusting, a TANA-X M10 Mirror Bolt Cap (product number:BCM-10) was installed as a waterproof measure.
How was your experience with it?
I installed Off-set Holder 45 with this Bolt, which improved Mirror visibility.
[Included Parts:were they on?
One Nylon washer is included but was not used this time.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Items to buy together:Screw lock fluid, M10 Mirror Bolt Cap
View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA MT-10SP, YAMAHA MT-10, YAMAHA MT-09SR, YAMAHA MT-09, YAMAHA MT-07, SUZUKI ST250E, SUZUKI KATANA, SUZUKI GSX-S750, SUZUKI GSX-S1000, SUZUKI GSR250, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Z650, KAWASAKI Z250SL, KAWASAKI Z250, KAWASAKI Z125PRO, HUSQVARNA Vittopilen 701
Yes.
The OEM was replaced with something like ”arinko”.
This is the only bar end mirror that has a range of motion inside and outside 。 One choice!
Mounted face down. 。 Therefore, it is a little difficult to see.
Although the position is somewhat less visible than the OEM, there is no substitute for the feeling of openness with nothing in front of you.
Ball joints will not move when coated with liquid rubber.
The screws of the restrainer will not loosen due to vibration if they are handled with Screw Lock.
The supplied in-bar mounting parts are not used. The original OEMRubber parts are the most well-fixed.
The car passed inspection without any problems.
View detail
Texture
The quality is excellent. As other reviewers have said, the weight of the Single Item ensures visibility and does not shake due to vibration. Of course, the Mirror section is smaller than the OEM section, so visibility is lower. However, this is not a problem for me, as I can adjust the size of the Mirror section to my preference. View detail
textured good feeling
I am satisfied with the texture and design. The adjustment can be set in detail. It would be even better if the Mirror section could be moved up and down, even if only a little. View detail
The product is as expected.
I am satisfied with the quality and design, and I think it is worth the price, especially with features such as the Turner. [Color] If you can Clear, I have no complaints. View detail
Blue Mirror is cool.
I really like the Blue Mirror.
The Mirror does not blur while driving and is comfortable.
I think Tanax is a reliable Brand.
They answered my inquiries in a friendly and courteous manner.
View detail
Blue color is eye-catching
This is a replacement for REBEL250 from OEM Product.
I tried to remove and attach OEMMirror, but it would not fit.
Manufacturer was instructed to remove the Mirror mounting base (silver color) attached to the telephone handlebar on the spot. It was safely attached.
The gap between the Brake fluidCase and the RightSide Mirror Base is a little small, making it difficult to turn the 17mm Spanner when installing the RightSide Mirror Base.
I am also satisfied with no blurring or loosening while driving. No loosening etc. I am satisfied.
It turned out very cool.
View detail
Impressions after 9 months of use
I like the design and have been using it for 9 months.
First of all, the paint was not applied to the edges of the Mirror when it was not used immediately after opening the package, and the surface was visible. However, after driving for a while, the turner part of the Left Side loosened and the Mirror moved at about 80km/h. I was afraid that I could not see the left rear side of the car at all on the highway. I was afraid that I would not be able to see behind the Left Side at all on the highway, and as long as the Mirror does not move, the visibility is good, but since it moves while driving, the function as a Back Mirror cannot be demonstrated 100%. I think it can be used without any problem as long as you don't touch the Mirror at about 60km/h in town driving.
I like the design.
View detail
The viewpoint to Mirror is farther away, which reduces eye movement and makes it easier to check the rearward direction.
[How is it used?
Mirror problem that I personally had been struggling with right after I bought my SV650X.
Perhaps it is because I am not accustomed to riding a naked type motorcycle with separate handlebars, but it is difficult for me to see backward with Mirror.
I had owned a good number of Separate handle type motorcycles, but all of them were full cowl type, so the Mirror was cowl mounted far forward of the handlebar. The SV650X, however, has a long bracket from the handlebar mirror holder to the front of the handlebar, and the mirror is mounted on the handlebar in a cowl mount far forward of the handlebar.:Pair (for Left and Right) Since it is on the Close to the point of view." + Mirror bracket section is long. Quantity for Mirror:Pair (for Left and Right) The distance between the two points makes it difficult to check the rearward direction only by eye movement.
I am a timid person with poor driving skills, so I had to check the back of the car more often, so even if I did a little work each time, the fatigue would accumulate over the distance and time and become a stress.
Was the one you received as per Image?
In the midst of all this, I found Napoleon On's "BAREN T.T. MirrorMirrorEX", the rise of the bracket from the front of the Mirror Holder and the adjustable angle of the bracket were just as I imagined.
Was the installation difficult?
Simply remove the existing Mirror and install this product; rather, installation is easier than with Normal mirror.
Just set it to the Position of your choice, and then use the Quantity:Pair (for Left and Right) may be somewhat cumbersome to adjust to the same opening.
How was your experience with it?
The mirror's mirror surface is more forward than that of the Normal mirror, so the viewpoint movement is reduced to a Large width, making rearward visibility easier.
[Included Parts:were they on?
The MirrorBody contains two Bolts for mounting to the Holder, one Opposite Thread Screw and one Pure Screw.
[Was there anything that disappointed you?
Disappointing, I would say, personally. I would like to have a VERSION with a longer bracket by about 10mm. Is it like that?
Other items that would be helpful
Point and hang of installation
No difficult task, but Quantity:Pair (for Left and Right) Mirror of Quantity at the same angle with the same opening.:Wouldn't it be better to have it set to Parenthesis in terms of Balance?
[Availability and clarity of the Instruction Manual
There are simple instructions on the back of the Package, but there is only one way to attach it, so there is no need to be confused.
[Notes]
If not firmly secured, they may begin to loosen due to vibration or wind pressure, causing you to panic while driving.
After installation & adjustment, be sure to check the tightness (but be careful not to over-tighten).
[ITEMS TO BUY TOGETHER
Nothing in particular. It may be possible to replace the parts of interest around the Handlebar with parts you like while replacing Mirror.
[Opinions and requests to Manufacturer
I have been relying on you for a long time to line up Mirror of various designs, and I hope that you will continue to maintain the lineup.
View detail
Design is good, but you can't see the back
When I replaced the handlebar, the angle of the BAREN Mirror Mirror I had been using was no longer suitable, so I searched for a similar Mirror of a Small Type and decided on this product.
In terms of design, it is nice, reflecting and not conspicuous.
However, you cannot see the back.
I wish the bracket was 5cm longer.
Also, the narrow width of the upper and lower sections makes it difficult to see the back of the car on slopes. I wished the upper and lower widths were 1 cm wider each.
I am well satisfied with it myself, but I would not recommend it unconditionally to others in terms of visibility.
View detail
Installed on cb400sb Changed from Cowl mirror to Handle mirror
Installation of Tanax Napoleon Shark6 on cb400sb NC42.
The difference from Shark3 seems to be that the mounting Bolt is Stainless Steel.
However, the Stainless bolt is painted Black, but the paint is messy and there is paint buildup in the Cap section, so the Hexagonal Wrench will not fit.
The supplied bolt was not used, but a cap bolt was purchased separately at a hardware store.
I used a Bolt that is 5mm longer than the supplied Bolt because it is tightened together with the Plate, which is used to attach a switch and voltmeter to the DRA RECO Switch.
I was disappointed with the included Bolt, but I am glad I bought Mirror itself.
View detail
Yanashiro Tanax
Its absolutely goreous, the mirror is nice and very easy to install. My bike looks so great with this mirror. The mirror come in pair, thats good, price is pretty cheap compare to what i got! I strongly recomment these for whom finding an option to replace oem mirror! View detail
Retro Style.
Ideal for creating a Retro Style. It also helps to hide Mirror's fixed Nut, which is rusting from scratches caused by tools. View detail
It was damaged.
Blister pack of Mirror packing material was damaged.
There were no pieces inside the box, so I think it was damaged during storage, not during transport.
The contents were fine, but the other party is Mirror, so please make sure you manage the storage properly. 。
I would have preferred to buy this at an actual store since the price is not much different.
View detail
it's recommended
The glare from ledHeadlight and other lights is also reduced, making it much easier to see at night. View detail
Honda old for VehicleMirror installed on CUBC125 (JA58)
Installed a hand-held old Honda Mirror (8mm positive thread)
OEM 10mm Mirror with reverse thread 10mm Handlebar side with positive thread
So I looked for an Adapter with 8mm Mirror side positive thread and 10mm Handlebar side positive thread.
Equivalent to Tanax CM-2 Easy to install, just remove and replace OEM
I like it because it looks Classical.
View detail
Overall a good Mirror
We have a small parking space for bicycles, so we need something that can be folded up easily, but we also want to be particular about the design. [Color] Clear was this Mirror.
The ADV150's style is comfortable and there are no problems with rearward visibility. There is a little bit of shaking while driving. The Mirror is a good Mirror overall, but after the second run, I heard a shaking sound from the Left Side … The mirror surface moves when I touch it with my finger … I guess the glue was not applied properly. I had no choice but to buy a new 1 pc. (Right Side has no problem)
Other than that, Mirror is satisfactory.
View detail
Replace with new one
The one I had installed was old? The screw part and fixation broke off, so I bought it to replace it with the same one, a new one.
Design is not bad and the price is not that bad.
It is also nice to be able to use Communal to Left/Right.
View detail
pleasant to the eye
Good looking and cool blue lens View detail