Reviews
It's safe to say that I'm right on target
I had been installing the 30mm Offset on the Left Side until now, but it became winter It is hard to see the Mirror when it is blurred, so the Left Side is 45mm I installed the original 30mm
The Left Side might be a little easier to see, but the Right Side I feel a lot better
Mirror is a good or bad idea for those who want to slip through because it sticks outward
View detail
This is a replacement from 30mm
The Z125PRO is not a quantity:Pair (for Left and Right) The length of the Handlebar is different and the Left Side is shorter (What about the other Motorcycles?) I learned on the Net that the 30mm
s Holder before the delivery of the motorcycle
In winter, when the wearer becomes shaggy, the arms will inevitably be reflected in the Mirror and visibility will be reduced It is
I'm a small motorcycle, but I've decided not to slip through the cracks, so I'm going to make the width of the bike I've decided to expand it
The Left Side is only 15mm wider, but it will be a little better
I'm going to put the 30mm Holder on the Right Side
View detail
There is nothing dissatisfied
Purchase to bring out the Mirror root.
Good thickness that does not feel anxiety of shaking vibration is good.
I'm attaching Mirror (Tanax) Because it was also suitable for Arm shape of Arm, it became a good appearance which made it difficult to feel the part because it was an extra item added afterwards, so it was good not to make it yourself.
View detail
Best quality for a mirror extender
I have used many and by far this is the most beautiful and solid of them all. It's not so light like those CNC aluminum one. It's solid and also comes with a 10mm positive screw which is a great bonus! I bought both long and short version of this. On some bikes, the long version may look out of place. So I need to use a shorter one. View detail
30 and 45 are recommended if you get lost at 30 and 45.
<Overall rating>
Attached to MT-07, VANVAN 200. With two units 30 / 45 I tried both. Mirror also tried a couple of others, OEM etc. Result As for any combination, I think that practicality is high because the Mirror shake is less and the field of vision is improved with roughly 30 mm. 45 millimeters depends on the combination, but there was a case where Mirror was blurred in a specific speed range. In the meaning of improving ease of view naturally 45 mm wins but I think that even 30 mm will be sufficient improvement.
<Mounting - Accuracy>
No problem.
At the beginning Quantity : Pair (for Left and Right) I imagined that the direction overhanging into the eyes improves visibility, but there were cases where it was easier to see how to move Mirror in front. In short, it seems to be better to decide how far away from the arm, by considering the adjustment angle of Mirror.
<Quality - Texture>
No problem. Texture is enough, too..
<Shape>
I think that it is sufficiently good shape. Although it has a heavy weight, it seems that this weight is necessary for preventing blurring.
<Visibility>
Of course, 45 mm is better Match Better. But I thought that 30 mm would be enough if this installed vehicle.
<Cost performance>
I think that it is a reasonable price. Blind Cover is sold separately, but I hope it is bundled.
View detail
Left behind looks better! (Lol)
Z125PRO actually experienced after experiencing the ride that Mirror of Left Side is not visible at all in the shadow of the body ....
Since Mirror itself is Opposite Thread Screw, Normal Thread Screw seen under Nut below it (Root of Mirror) I removed the Holder and attached it.
Although it is an Offset of 30 mm, it is much easier to see the back!
View detail
The texture is good - - -
Items arrived inflated but inflated and installed, but it does not fit smoothly ??? Eventually I gave up that day
Cutting the screw hole at a later date
Accuracy too poor
View detail
Almost satisfied
Since the narrow Short mirror is attached, in order to make it easier to confirm backwards.
Even if Visual can not be helped, this makes it easy to check backwards.
It is cheaper than exchanging Mirror itself, so if you would like to divert the currently installed Mirror, you are recommended.
Let's tighten it well when installing.
View detail
Must-have item in Handlebar Mounting of TMAX 530
? 【What made you decide the purchase?】 When changing Mirror of TMAX 530 from Cowl to Handlebar Mounting, because behind was not seen at all.
? 【How was it actually used?】 The backward visibility has become outstandingly better.
? 【Was it difficult to install? (Hard parts case)】 It's pretty easy.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Parts come around with tightening, so tightening is necessary while holding firmly.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?] None. It is as expected.
? [Request to Manufacturer - Please tell me if there are any improvement points】 Lineup of Tanax is really wide and I like Large.
? 【Have you compared items?】 OffsetHolder30
? [Others] The product is wonderful, but I feel frustrated that the aftertaste feeling is strong.
View detail
Performance as expected
Installed for improving rearward visibility of CROSS 3.
I need 8 mm Hexagonal Wrench for installation.
Since there was only 6 mm of the Z250 on-board tool, we recommend that you work before confirming the tool at hand.
Performance is as expected and Large satisfied.
View detail
It is a very good product at a low price
When I dressed in winter, it was a matter of trouble that I could have more blind spots in Mirror.
Tentatively what is something like 1pc. I bought it and tried it.
Mirror's range of motion became Large, and the width of Mirror became visible just behind while fitting it within Handlebar.
However, since there is slight vibration compared to not being installed, the scenery will be blurred depending on the running speed. Both Sides It was tough to shake and the Right Side Mirror was originally visible to some extent so we decided to use only Left Side Mirror.
View detail
It became easier to see the back
In the NORMAL state of Z125, Mirror got too close to the inside, so it was a little low, so I was bothered to confirm the backwards, so I bought it.
After exchanging height can be raised and sideways also moved so that you can check by eye movement only. Attention is necessary when rubbing through by Mirror moving sideways.
View detail
Making quality solid and healthy
I tried grabbing the actual thing in my hand and gotting a little more than I thought it was a little bit brisk..
Because I made it to Brake master outside the company, I wanted to make sure that the Mirror position got closer to the front than the Left Side,
I wanted to broaden the rear field of view sideways so I bought it.
I am satisfied that these troubles were solved at once.
As I wrote in the beginning, the real thing is to make Large change steadily so there is no worry about play after installation.
However, it is still awkward and there is quite a presence, and if it is Slim a little more I think Iina.
View detail
Mirror's original function
Grom 's Mirror is only attached with a hook, it was a situation that the back could not be seen without shifting the body at all, but once this Holder is installed, the original function of Mirror is revived, which enables further safe driving. View detail
I can see the rear better
In the current Mirror I tried installing it because it is hard to see the back
It feels like going out a bit more than the previous Mirror
It is very handy because you can see the part hidden by the arm until now
Bolt comes with it, but because Cap is not attached to hide the hole in Cap bolt
I think whether it is better to purchase separately if you mind watching water in Cap bolt
View detail
45 to 30
Up to now I have used 45 mm and 30 mm and Quantity : Pair (for Left and Right) Because it was different
I purchased it to unify it.
Results 30 mm and Quantity : Pair (for Left and Right) It became the same
Touringetc. I raised my hands with Rider at the time of mistake and it was easy to say a greeting and I used it because I wanted to put it further sideways, so I used it.
As the position is good even with Small Mirror it is easy to see the back
View detail
Rear confirmation has become easier.
Quantity : Pair (for Left and Right) Together, it was installed so that it Offset 45 mm laterally. My arm was reflected on Mirror and confirmed just behind was difficult, but it improved considerably. View detail
Tanax Mirror Offset Holder 30 mm
This time I installed it in MONKEY.
As Mirror installation position entered inside due to High Solo, my shoulder and elbow running on Mirror was reflected and I could not check backwards, so I installed OffsetHolder.
I installed 30 mmOffset this time, but now I can check backward without problems.
It is also solid making of OffsetHolder itself, rigid also has Mirror's Bibi etc etc etc. I can use it without it.
View detail
Ease of confirmation backward Up
Purchase to upgrade Mirror's readability.
The result is perfect.
But it is a difficult point to have a high ...
The angle of installation was strict, so Quantity : Pair (for Left and Right) It is a bit of an apparent problem that Minus is different in width.
View detail
Rear confirmation is very big thing
【What made you decide the purchase?】
I am on DUCATI HYPERPEGASO 650 STRADA, but Position is close to the off car.
Small OEM Mirror (Moreover, Small towards the outside) , Because it is in a low position,
I am concerned that a considerable eye movement is necessary for backward confirmation,
Because it seemed possible to adjust Mirror position freely back and forth.
【How was it actually used?】
I tried to bite Polygon Mirror of Takegawa.
Polygon Mirror was very difficult to adjust because the adjustment width of Mirror part was very small,
Thanks to that, the backward check has become much better.
(Immediately after installation, I noticed the White horse of Blue clothes by the back from behind on the expressway!)
I also have solid paint and it's better to choose Black and Chromium Plating.
【Was it difficult to install? (Hard parts case)】
The installation itself is not difficult, but I need M10Screw's Hexagonal Wrench.
【Please tell me the point of installation and hang (in the case of Hard parts)】
In the beginning, I feel a little loose.
Since I was planning to tighten it considerably strongly in hand lug Wrench, I had the tools stationed and went touring.
Now that the position has been decided, I coped with Screw lock.
[Is there anything I was disappointed about?]
It was also in Impre of the other person - - - The appearance is not good.
However, there are some effects that compensate for it.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is good to increase several types of patterns, but at this price you can not say luxury if it is effective.
【Have you compared items?】
Tanax Napole On Offset Holder 30 SA-23
(Shorter one of this product)
View detail