Reviews
Paint is weak
It's been about 5 years since I installed it. I keep it indoors and don't ride it in the rain, but aluminum rust has started to appear.
The paint is weak.
They don't seem to be doing any kind of Anodized or Plating.
This is a part to shift the Mirror to the side to increase the viewing area, so it is fully functional, rigid and good.
I need to use Sandpaper to remove the rust and paint it.
View detail
For visibility.
Because the body is Large threshold, in OEM position
All I could see was his arm, and I thought it was dangerous.
I bought it instantly.
Good visibility after installation.
I need a hexagon for installation.
It was not included and had to be purchased separately.
The texture is very good, but
It's a little pricey.
View detail
Mirror is now easier to see
I'm glad I bought it because I didn't realize how much easier it would be to see just by moving the Mirror around a bit.
It is easy to install, and it is Recommendation for those who are suffering from the difficulty of seeing Mirror.
View detail
I installed it, but ……sorry?
Easy to install
However, I installed it on MT09, but it interfered with the Cell and the Engine cannot run.
When I installed it by shifting it, it would be out of the purpose to begin with, so I gave up and removed it and decided to change the Mirror itself.
View detail
It's easier to see behind you.
KATANAMirror is designed for that drooping angle, so the pipe handle with less drooping angle is a little too high.
They didn't like it, so they removed the stump part and removed the Quantity:When I set it, the Mirror was driven inward too much and visibility was sacrificed.
So I introduced this OffsetHolder with reference to your review.
Results are good.
I'm a little concerned about the tactile look and the fact that it's completely Rigid, but I'll be riding this Spec. for a while.
View detail
Was it a good buy?
I was replacing the Mirror, but the Mirror was a little low, so I was looking for something better.
I found this product and researched it, and it's a good height and distance from the Lever, so I bought it.
I'm glad I bought it
View detail
Good product
In the C125, you had to shift your body to see the rear.
Installing this product made it easier to see.
Speed of delivery, packaging and responsiveness are very good.
View detail
Very good
Our Motorcyclec125 had poor rearward visibility, which has been improved.
There are two different colors and the accuracy of the product is fine.
Installation is easy.
View detail
It's not just Mirror.
I bought it to change the position of Mirror, but because it seems to be able to use it for other uses. Even after replacing the Handlebar and Mirror, I don't think it's a problem to keep it without thinking it's unnecessary You can also use it for additional metered rackets and fixed Camera rackets. View detail
You can see the rear even better
I wore Napole On CROSS3 at the end of the Grom period, but your arm was reflected in the Mirror and I was able to see your arm in the Mirror I had to move my whole head to check the back of the car
Using Offset to move forward opens up the field of view and allows you to check backwards without moving your head
You can now
We were already using the height adjustment Spacer, so we were able to install it without any particular limitations in our range of motion I did
The green part of the photo is a curing tape
View detail
It is used for Right Side Mirror of MONKEY125
The Very Stylish Monkey 125 But when I got on board, I found out that I can only see a quarter of the Mirror It was a thing
(Note:Depending on the size of the rider I can get a good field of view with no problem (I'm sure some of you are.)
When I searched the Net, I found someone using these Parts I like NORMALDesign For me, I thought it was a product worth trying
Once installed About two-thirds of the way up It became a practical Mirror somehow
of course "Check in the Mirror, see with the naked eye It's a basic principle of safe driving
View detail
I use it for Left SideMirror of MONKEY125
The Very Stylish Monkey 125 But when I got on board, I found out that I can only see a quarter of the Mirror It was a thing
(Note:Depending on the size of the rider I can get a good field of view with no problem (I'm sure some of you are.)
When I searched the Net, I found someone using these Parts I like NORMALDesign For me, I thought it was a product worth trying
Once installed About two-thirds of the way up It became a practical Mirror somehow
of course "Check in the Mirror, see with the naked eye It's a basic principle of safe driving
View detail
Necessary for the type of car you need
Adapter to Offset Mirror to the outside
Black paint is beautiful, but it floats a bit
Since it is placed between the Mirror and the other mirrors, the Mirror position is naturally a little higher
With the Screen and Smartphone Holder of the type that clamps to the Mirror mounting point Maybe we shouldn't use a combination of the two?
Be careful about the area because it does not stand up straight from the Mirror mounting point
The Left Side of the Z125pro hits the Clutch lever attachment point, so the 45 Type
View detail
Necessary for the type of car you need
You can't see the back of the car because your body (arm) takes up most of the Mirror This is an Adapter that offsets the MirrorBody to the outside
It's unlikely, but if you put it upside down, you can put it inside InQuantity:You can also set
The black paint job is beautiful, but it looks a bit floaty
Since it is placed between the Mirror and the mount, the Mirror position is naturally higher
The rise from the Mirror mount on the body side is designed in a strange way, so I have to make it my own In the case of the Z125Pro, it will hit the Clutch lever installation bolts at 30 degrees We need to get it out of the way a few minutes ago
That's why I bought a 45 Type, not a 30
This and the Sandwiching Type Shield and Smartphone Holder Maybe we shouldn't use them together?
I don't know... I don't know
View detail
It's easier to see the back
Since the Master of Brake and Clutch was replaced, the position of the Mirror is in front The situation was somewhat difficult to see behind me as I moved to
When I installed this 30? and moved it slightly out of the Front, it didn't detract from its appearance The Left Side does not interfere with the Choke Lever The Mirror is OEM
It is well made and safe to use
View detail
TANAX Off-set Holder 45
The quality is very excellent. The excellent appearance of the product is given by the excellent quality of a smooth and mirrored chrome finish. Before installing these mirror expanders, I had simple black mirror expanders, the appearance was not very impressive. After installing the chrome expanders, the appearance has changed, it looks very elegant. The bolts could be used 5mm longer, as I have the hand guard, these are a little short. After installation, the view from the back is much better. Very satisfied. The quality is very excellent. The excellent appearance of the product gives the excellent quality of a smooth and mirror chrome finish. Before installing these mirror expanders, I had simple black mirror expanders, the appearance was not very impressive. After installing the chrome extenders, the appearance changed, it looks very elegant. The bolts could be applied 5mm longer, since I have a guyra hand protection, these are a little short. After installation, the rear view is much better. Very satisfied. translated by google translate View detail
It is sold by pair
I bought it for the ETC Bracket
I'm glad to use it for something other than Mirror
It's just a shame that it's a bit expensive and only sells one piece
View detail
Large strange and well-made product
I bought it because I could not adjust the angle of the Mirror because the MASTER was in the way It can be used as I intended and is solid without wobble View detail
Recommendation
Narrowing the Handlebar width ensures a clear view to the rear
Doesn't interfere with Handlebar Switches
The texture is not different
I'm happy with the paint and finish
View detail
For improved visibility
If you wear a blister, the Mirror half of the Left Side will be your arm
The Right Side is not so much, so I'm going to change the mounting position of the Mirror on the Left Side to I bought this product because I thought it would be better if I could move it forward a little bit so that it would be aligned with the Right Side
The results were satisfactory
There doesn't seem to be any blurring that I was worried about
The reason why I reduced the number of stars in the Cost performance category is that if the Bolt cap is attached to this Because I thought, "Oh my God!
View detail