Reviews
As expected
[How is it used?
Circuit70%. Touring30%.
Was the one you received as per Image?
as you see in the photo
Was the installation difficult?
Simply secure with the Double-sided Tape attached to the Tank Cover.
How was your experience with it?
before use
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
The completion of Naked is the Under Cowl!!!
I really like it. The design, completeness, and bracket fitting of the object were perfect for my standards. The accompanying manual was in Japanese, but the pictures alone were enough to explain. View detail
Large and Cool
I bought it because I set the Sprocket to a Large size to use it in Race, and it contacts with the NORMAL Rear Fender.
The position of the Chain Cover is also made higher, so it could be installed without any contact.
Fender is also getting cooler with a larger size.
View detail
Buy Rear Fender
I listened to the music with good texture and Stylish.
I was concerned that the NORMAL Rear Fender was too short and the Rear Shock would get dirty, so I am glad to hear that my worries have been solved?
View detail
Excellent product and service
Excellent service and products. Good delivery times. Communication was great also. Would recommend to anyone. Will be using again in future. View detail
Mc22 great mod
Good quality and adds a great look to the bike. Either as a race bike or as a race look with a mono light. Really easy to install just a srewdriver needed and about 5 minutes! View detail
The fact that Lineup exists is a miracle in itself.
Purchased for use at a driving event.
It is a miracle that there is a Lineup even though the car is out of print. Thank you for making it.
It is very difficult to find parts that are no longer in production, but we are very grateful to Saiya for still making them.
It will take some time for delivery, but if it is available, the wait will be exciting.
View detail
Although it is the 2nd piece, the result is good as usual! Arrival is also early!
Although it is the 2nd piece, the result is good as usual!
Arrival is also early!
View detail
Since the friend attached, it purchased. Attachment is dramatically easy and easy also for beginners. After attachment became very smart! It is admiration up custom rather than changing a muffler! Please try! In the direction which has rem
Since the friend attached, it purchased.
Attachment is dramatically easy and easy also for beginners.
After attachment became very smart!
It is admiration up custom rather than changing a muffler! Please try!
In the direction which has removed the exhaust air cleaner, it is recommended further!!
View detail
more than expected
Compared to replacing a Single Seat, it is inexpensive, and it is a good cosmetic product with direct information from Motorcycle. View detail
Installation on SP Tadao Exhaust System (not compatible, modification required)
I was looking for an Under Cowl that could catch oil, and I found this product and ordered it.
The installation was confirmed as AKRAPOVIC Exhaust System, but we have replaced it with SP Tadao Exhaust System (POWERBOX FULL RS), and the expansion chamber part is cylindrical, so we purchased it on the premise of modification.
After confirming that the rear end would hit as expected when actually installed, the necessary area was shaved off a little at a time to match the actual product.
The object is cylindrical in shape and the under cowl is also inclined, so it did not go as expected. After repeatedly removing and shaving, shaving and matching, we finally secured clearance with the expansion chamber, and when we tried to install it, the screw position did not match slightly.
After forcibly installing it and rechecking the clearance, I found that the expansion chamber at the rear end was not hit and the parts at the mounting point were loose enough to allow for some adjustment without tightening the bolts, but when I looked underneath, I found a moccoli that looked like the forward part of the expansion chamber.
I thought about cutting up this area as well, but it would be a complete disaster if the oil receiving function is lost, so I decided to put Heat Insulating Material on it for now and see how it goes.
I completed the installation and test drove it to lightly fill it with Gasoline, but it smelled a little burnt? I thought I would give up and drill a hole in the oil receiver if it burns, since I usually remove the oil receiver rubber plug.
This time, it was installed outside of the conformity. I wished the bottom was 5 to 10mm lower and the back end sloped back a little more, but I am satisfied because it is almost exactly as in the Image.
View detail
Quality is top notch!
Fitting was quite good and easy.
It was fine as is, but I painted it with a paint I had at home and I think it has excellent cost performance. I made a mistake in choosing the paint, so I may repaint it one of these days.
View detail
be fascinated by
Although it is a part that does not need to be installed, I did not expect such a drastic change in impression with such a simple installation. I can say with confidence that the parenthesis is too good. The installation is super easy, and it takes less than 10 minutes if you have a driver&Spanner&Pliers. The only thing I am worried about is that the area around the Sprocket is mesh and the clearance with the Chain is about 5mm, but it is around the Sprocket, so it should be large enough, right?
Paint "As a paint base..." but I would like to keep it that way for a while.
If I had to ask, I'd say another 20-30mm longer.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3, YAMAHA YZF-R3
Wet Type with excellent gripping power!
[How is it used?
Tail cowl and seat base are of course made by Saiya.
I think this is basically FOR Repair. I thought it was an Upgrading item.
When you buy a Tail cowl, you think it comes with Standard, but when you buy a Tail cowl, it comes with Quantity.:Seat rubber is also set.
It was High PERFORMANCE.
Was the one you received as per Image?
It was just like the Image! I wanted this Wet Type!
Previously, only the dry type was available in the lineup, and the dry type was not durable.
I disliked it because it would fall to pieces and lose its Grip power when it started to fall apart because it was defeated by my buttocks.
So, until I learned about this product, I had been using Magical racing's Wet TypeUniversalSize
It was cut out and used.
Was the installation difficult?
It is cut beautifully in the shape of the Seat Base, so there is nothing difficult about it.
The best place to put it is on the floor, so we carefully degrease the surface before applying it, and also try to find the best place to put it by actually sitting on it.
If you Masking and apply it carefully, you will not make a mistake.
Since the adhesive surface is strong, it is not possible to reapply the adhesive once it is attached.
How was your experience with it?
It's great. Grips well and lets me concentrate on Riding!
[Included Parts:were they on?
None. This product only.
[Was there anything that disappointed you?
Not on the product itself! If I may say so, it would be even better if the Cut was a little more Large and the Rider could be adjusted as desired.
View detail
Saitaniya Tank Pad (Twill weave) Carbon
I also had it on my DUCATI Panigale 1199R.
It's the usual Manufacturer.
For 2021 MODELKawasaki-Ninja ZX-10RR
The SaitaniyaTank Pad was terrible, but…
This one is good work.
[Why? The quality of the product is similar to that of the same manufacturer.
View detail
Cool!
It's expensive, but it's cool.
I'm not complaining because I'm buying cool at Gold.
If I may say so, I was wondering if Brackett could offer a few more suggestions.
I decided to accept the fact that it was a Cowl shop.
View detail
Fits: KAWASAKI ZX-10R
Tank Cover
It's a solid product. Next Material:FRP products will also be here. View detail
Tank Pad installed
I mainly do circuit running and it is very easy to get a good knee grip. View detail
I chose the reverse side.
I compared it with a similar type that changes the shape of the back end of the tank, but the key factor was that the reverse side also has Gel Coating (cold press)!
After seeing the actual product, it is indeed smooth and looks like it will not scratch the Tank side.
The front side carbon eyes are also beautiful and satisfying.
If I had to say, I'd say it's at the fueling station. "Fuchi." The finish of the cover is still intact, and the cover covers the fuel supply port, so if you need to remove the fuel supply port, you will need to remove the cover as well.
If you wash your car with water, water may enter the gap between the Tank and the Cover.
But the installation accuracy was fine.
View detail
For Circuit
I ported the Rubber Bush from OEM Mount and installed it. The size is Exactly the same and the meter is Refreshing. View detail