Reviews
I'm glad it arrived on the promised date.
It arrived well packaged and intact on the promised date, but the ending was a bit disappointing.
There are places that look broken...
However, it was easy to install and I think it is a very satisfactory product if you are a little careful.
You will be able to see my bike change a lot in just a short amount of time...
I know that the knee grip is better thanks to the shape of the tank cover.
If the knee grip is disappointing, it may be a functional tuning rather than a simple emotional tuning.
-------------------------------------------------- -------- It arrived well packaged and intact on the promised date, but the ending was a bit disappointing. There are places that look broken... However, it was easy to install and I think it is a very satisfactory product if you are a little careful. You will be able to see my bike change a lot in just a short amount of time... I know that the knee grip is better thanks to the shape of the tank cover. If the knee grip is disappointing, it may be a functional tuning rather than a simple emotional tuning. Powered by Google Translator
View detail
Knee grip is easy!
It was installed with only Circuit use in mind.
It's easier to knee grip.
It looks good.
View detail
CustomPoint and features selected for your needs.
I think the fit is very good. I am satisfied with the look of Carbon, which is different from Normal. I expect it will be comfortable since the height is slightly higher than the Seat position. I would recommend it to anyone who wants to install such custom parts. However, please understand that this is my personal value. View detail
Better looking.
I don't run aggressively, but I was concerned about the thinness of the tank, so I bought it hoping that it would look good, be easy to grip by the knees, and prevent wounds. I was happy about that, but when I tried to install the double-sided tape many times, the material was too hard and the place where it interfered with the tank was rubbed. View detail
GSX R1000R Saiya Tank Cover
The appearance will be cooler for Large, but the UAiretc.. The place where it hits will get a scrape in a day. It's a shame.
Knee grip is improved.
Circuit is now easier to run.
View detail
ExactlyFit!
I bought this to protect my NORMAL Tank and to increase the hold feeling.
The installation is supposed to be easy if you follow the instruction manual, but I was clumsy and had to redo it several times. I was defeated by the pressure of the double-sided tape, which is a one-shot game, but the accuracy of the product is so good that it was no problem at all once it was in the correct position.
It feels good to use. There is no rattle or gap and the bike is now easy to hold and can withstand the deceleration G's at full brake. I also installed a footpeg and a tank pad at the same time as this product, and the increased sense of unity with the bodywork has made it easier to perform actions such as laying the motorcycle down and raising it up.
View detail
R1 tank colw
Very nicely manufactured, will do exactly what i want it to do , only minimal down side is on the sides of the cowl doesn't tuck under my carbon airbox cover and u can see a small gap with the tank underneath, apart from that its perfect so bring on the track View detail
good!
The size fits well. However, the surface of the painting is a little rough and insufficient. But, it is of great quality for the price. View detail
It's a good product
I purchased because I wanted to be an HP 4 race style Aluminum Tank.
My Motorcycle is full Carbon Spec. So it was Large strange that it was taken or scraped because there is no play.
I thought that some processing was necessary, but it was a bit Large strange.
It's awesome as a Guard when you kill.
s1000rr is expensive when you repair with Aluminum Tank
View detail
I am satisfied with the product quality. However, it is costly to include paint.
【What made you decide the purchase?】
Mr. Gendaiya has sold a set of R1 Type Cowl for R25.
But I do not want to change everything altogether, "If you look closely it is something different from ordinary R25?" I wanted to do about Makeover. So Tank Cover, which is easy to return to original even in the unlikely event of pricing as well as partly, was sold as Single Item, so I decided to install it.
【How was it actually used?】
First of all, if it says comprehensively, "I'm glad you changed it." I felt it..
<About products>
Other Company ProductCowl is not so high in experience that it is hard to wear it ... (?) but,
In this product, there was no Gap in the position of the screw hole, Tank cap position, etc., and it was possible to mount it almost without machining.
When you install it, the image of the car body changes more than you thought.
If you can see the photos, you can see that the width is wider and the depth is longer compared to the OEM, I feel like the volume of the car has increased.
Especially, the difference when seeing from SIDE is Large, it is subjective, but purely "It's cool!" I feel it..
<Use feeling>
This is also subjective, but the Large has changed.
The reason is that due to the increased depth "The seating surface has become narrow" And, it is the feature of the biggest Large "From the part where the crotch gets hit, the design across Tank cap is close to right angle" is.
As the seating surface narrows, the seated position inevitably becomes closer to the rear, and the body is in a forward tilted posture.
From the part where the crotch hits to compensate for it, because the design through Tank cap is close to orthogonal
It makes it easier for you to deposit your upper body on Cowl, reducing the burden.
I thought it was well thought out Design.
【Was it difficult to install? (Hard parts case)】
As mentioned above, the accuracy of the product was high, so there was no difficulty to that.
If you can desorb Cowl, I think there will be a lot of hardship.
Also, when wearing Cowl, the part surrounded by the red circle in the figure (Quantity : Pair (for Left and Right) Both) Grommet is required.
I think that it is better to order OEM Parts Number at the same time.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Relationship of Cost reduction, Omnibox of R25 which is thin as a whole and feels unreliable, but on the other hand this product is made tightly, and it gets a sturdy impression.
I feel that it is solidly made, but because it is built as tightly, "Wrinkle" There are also people who are a little confused because it is difficult to do.
This side (Seat) From the side, back (Handlebar side) I think that you will be addicted cleanly as you slide it into.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
Because of Hard parts, none.
[Is there anything I was disappointed about?]
It may be because I do not have processing technology,
There is a gap between Tank and Seat. It is caution when rain, car wash, etc. take water.
Overall accuracy was high, but there was a fairly large gap, which was a shame only for that point.
【Hope for Manufacturer - Please let me know if you have any improvement points]
It is how to sell, but Painted (OEM color) I'm glad if things of Lineup are also done.
Especially since it seems that there are many Blue in YAMAHA, it seems that popularity will come out if you join one of Lineup.
【Have you compared items?】
nothing special.
[Others]
The image of this product is Painted's one.
My car body was Blue, so Paint the paint shop (Blue monochrome) When asked, the Gold amount was about 25,000 yen with shipping fee.
So, the Gold amount you spent with Total is around 45,000 yen.
For your reference.
View detail
Fitting is perfect!
I liked the shape made by LaborWolf, but since there was Twill Weave Carbon, I made it here w
Because Carbon parts of Mr. Tsutaya shop has not been protected against ultraviolet rays, I am asked to paint UVClear thick in a painter. Fitting and finishing of details and the back side are Beauty. There was a slight contamination of the surface on the surface, so the paint shop handled it. If it is installed for Dress-up purpose, it will become white muddy in snow unless UV protection is done. Distortion of the weave is also conspicuous. If there is also a little cheaper COSPA is also 5 ☆ - - - w
View detail
Fits: KAWASAKI ZX-10R
If you like Motorcycle "Oh!" Be sure to become
I installed it for pre-ride prevention and Hold feeling up in the bank.
The installation comes with a thick Double-sided Tape, floating - Distortion etc. It was able to install tightly without too much The accuracy of the work precision is wonderful!
I also attached other company's Tank end to R1 that I was on before. Material : Because I was FRP, I was concerned about peck peco and dent and this time I chose Plain Weave Carbon daringly. I had a hard feeling of Hold as intended and I think that it was satisfying shopping that was convincing and satisfying without dents.
Simply as Dress-up parts half of Tank is Carbon, I'm fiddling Temporary feeling is already insisting!
It would be more prominent if it was twill weave ...
View detail
It is difficult for those clumsy to install
First, Design was good and it was good that Knee grip became easier.
Although it is an installation, Double-sided Tape is troublesome in case you have to paste it yourself.
The back side is smooth and easy to paste - - - (^-^;
Because I am clumsy, I tried it together before putting it on, but it interferes with Seat a bit.
If you give it above, it will be difficult to open a gap near with Tank Cap.
I removed Seat and installed it, but after all it seems that Seat is not getting attached to me.
Although there is no image, it is like a person who is attached to Tank Pad of Green who is coming earlier.
So, even if you scrape down the bottom part, it interferes with Seat a bit but Seat itself managed to install it.
I want the Instruction Manual.
I always thought that it was clumsy.
View detail
Silhouette Outclassing
I purchased White Gel. Carbon, because it seems that those with the same color are more likely to dare, White color and Challenge (^. ^)
However, since there are many small SmallWounds to install directly as White Gel as it is, those who are worried should prepare for painting. Budget for paint cost as much as 5k ... Also I minded myself and painted in-house paint.
I like Silhouette because it is Outclassing. Since my motorcycle is Green Light, I have floated A little unless you enter the White element a bit more (^ ^;
For your reference ...
View detail