Reviews
Satisfied with Design
I was looking for replacement parts for OEM parts that had deteriorated over time, so I'm glad I found them.
I was concerned about the installation method, which is not shown in the picture, but Instruction Manual is included and it is easy to install. 。
Since the Tire size was increased this time, the Bracket was set to "Quantity" in the Home center.:2pc. Set(Quantity):Pair (for Left and Right) The installation position was corrected by purchasing an additional (1).
The material quality of the product and the processing of the White Gel Coat were satisfactory.
View detail
Carefully made, beautiful
It is as if they are Japan's leading CowlManufacturer.
Everyone has their own taste in Design and I like this OEM chic. I also like that it is slightly extended!
Fitting may be a little bit necessary, it depends on the item, but I was able to install it without any modification. I was able to install it without modification. The holes are slightly long, so fine adjustment is possible.
View detail
Good build quality.
The mounting hole position was Exactly.
Only the orientation of the bracket holding the Rear Brake hose was changed.
Black Gel Coating, so it is painted before installation.
View detail
Is good
Installed on a TZr50R. I was informed of the delivery date when I placed the order and it took about 2 weeks to receive it. [Color] The OEM Chain Cover and Brake Hose Bolt was removed because it interfered with the OEM Chain Cover and Brake Hose, but the Chamber and Brake Hose seemed to hit each other, so the Hose was fixed to the Fender's Mesh with Tie Wrap. I am satisfied with the new look of the Rear. View detail
Large and Cool
I bought it because I set the Sprocket to a Large size to use it in Race, and it contacts with the NORMAL Rear Fender.
The position of the Chain Cover is also made higher, so it could be installed without any contact.
Fender is also getting cooler with a larger size.
View detail
Buy Rear Fender
I listened to the music with good texture and Stylish.
I was concerned that the NORMAL Rear Fender was too short and the Rear Shock would get dirty, so I am glad to hear that my worries have been solved?
View detail
Presumption of painting
Since it is longer than the OEM Fender, it will provide some protection from sand, but it will be placed near the Mono Suspension. Also, if you don't paint it or add WrappingSeat, the white FRP corner surface will be noticeable from the back, so if you buy FRP, it is better to install it after you become a person who cares about it.
The work itself is easy for those with small hands.
View detail
The mud splatter was so bad.
[How is it used?
Commuting, Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Installation was easy, but I had a hard time getting my hand into the place to stop the lippet.
How was your experience with it?
Mud splatter was reduced.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Since the friend attached, it purchased. Attachment is dramatically easy and easy also for beginners. After attachment became very smart! It is admiration up custom rather than changing a muffler! Please try! In the direction which has rem
Since the friend attached, it purchased.
Attachment is dramatically easy and easy also for beginners.
After attachment became very smart!
It is admiration up custom rather than changing a muffler! Please try!
In the direction which has removed the exhaust air cleaner, it is recommended further!!
View detail
be fascinated by
Although it is a part that does not need to be installed, I did not expect such a drastic change in impression with such a simple installation. I can say with confidence that the parenthesis is too good. The installation is super easy, and it takes less than 10 minutes if you have a driver&Spanner&Pliers. The only thing I am worried about is that the area around the Sprocket is mesh and the clearance with the Chain is about 5mm, but it is around the Sprocket, so it should be large enough, right?
Paint "As a paint base..." but I would like to keep it that way for a while.
If I had to ask, I'd say another 20-30mm longer.
View detail
splash of mud
Rear tire mud splash prevention, looks good, so this is installed.
Works great for rain, puddles, and mud splashes.
It is a nice product with a nice look and feel.
However, the fixation method, Tie Wrap, is not quite right.
It is unfortunate that no consideration is given to prevent scratches from mounting and vibration.
Was it a bit unreasonably fixed? Long-term use seems to cause Cracks to enter without being noticed.
If the fixing method, scratches and cracks caused by vibration were taken into consideration, there would be nothing to say about this product.
View detail
I think it's a very effective part.
The OEM Product is small and does not have the length in the back direction, so the Fender Eliminator KIT is replaced and the mud splatter is noticeable, but this Fender has good length and shape, and it also serves as a chain cover, so installation was easy. For budget reasons, I decided to go with the Black Gel Spec. instead of the Carbon Material. [Color] ClearI just painted it and installed it and watched it. View detail
I can't install it at all.
I had ordered it for the Halle stage, but when it arrived, the dimensions didn't fit at all and I didn't feel like putting it on. Too bad. View detail
Material:Carbon Style is very Parenthesis and easy to clean!
[How is it used?
I go to Touring and mountain passes exclusively.
Material for dress-up purposes:I purchased this product from Twill Weave Carbon.
Was the one you received as per Image?
The Chain Guard was thicker than I imagined than the OEMRear Fender. Other than that, it was generally as Image.
Was the installation difficult?
To install, simply remove the four Hexagon Socket Bolts, remove the OEM Rear Fender, and install this product.
You don't need any special skills to dress-up!
How was your experience with it?
It is designed to be 10cm longer than OEMRear Fender, and you can feel the effect in rainy weather. unlike OEMRear Fender, the surface is smooth and easy to wash and maintain.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I have installed an external Swing Arm Cover on my car, but the Left Side Swing Arm Cover interfered with the Rear Fender Left Side, and the Hexagon Socket Bolt did not fit completely. Fortunately, it can be fixed, and I will file the lower part of Rear FenderLeft Side later.
Material:Carbon Style is very Race ish, Parenthesis is good and easy to maintain.
View detail
There are some cracks...
It took me about three weeks to receive this product. I was happy to receive it a little earlier than the expected delivery date. The packaging of the product was also very good. However, It is full of defects. The carbon panel has no problem, but there are some cracks in the clear layer. I finished installing this product but it's slightly tilted to the left. If I get a size 140 tire, I'm sure there will be interference. So I think I need to modify the L-shaped bracket on the right a little bit. I think it's a very disappointing product overall. View detail
Custom motorcycle requires ingenuity.
If it is OEM Exhaust System, it may not hit, but because Exhaust System was exchanged, the product was caught between Swing Arm and Exhaust System, and when Suspension contracted, it made a creaking sound, but when Aluminum spacer was put in Tandem hook which fixed Exhaust System, it was perfect. However, when I inserted the aluminum spacer into the Tandem hook which fixed the Exhaust System and Offset the Exhaust System, it was perfect.
It is necessary to devise the installation according to the state of the motorcycle, but the state that puts it on is Parenthesis good.
View detail
Saitaniya Rear Fender
Too bad about the mounting system!
The first tank end I bought didn't match the machined hole positions at all, and the tank end was a forced fit.
Rear Fender is likely to be cracked if you install it with the holes aligned.
I don't use it, there is too much space between it and the Swing Arm.
Cancellation is not possible and I do not want to buy again.
View detail
It can be installed with no problems.
There are many cases in which carbon parts may need to be processed to be installed depending on the manufacturer.
The Saitaniya Front Fender was easy to install with no such problems at all.
Also, the Carbon parts are beautiful and highly satisfying.
Recommends to Dress-up
View detail
It is indeed made by a famous manufacturer
Installed on a 2019 YZF-R25
Installation was as simple as removing the OEM Chain Guard and fitting it in there
The texture is very good and the accuracy of the installation is also very good is coming out well, I bought the Black Gel one, so I'll paint it eventually! I think
View detail
good shape
MT-03 is not compatible, but it can be installed
I was looking for the longest possible Fender length and came up with this product
If you have a NORMAL rear brake, you can use the Bracket for fixing the Brake hose Just bend the claw in the opposite direction to attach the Hose Bracket
View detail