Reviews
Satisfied with Design
I was looking for replacement parts for OEM parts that had deteriorated over time, so I'm glad I found them.
I was concerned about the installation method, which is not shown in the picture, but Instruction Manual is included and it is easy to install. 。
Since the Tire size was increased this time, the Bracket was set to "Quantity" in the Home center.:2pc. Set(Quantity):Pair (for Left and Right) The installation position was corrected by purchasing an additional (1).
The material quality of the product and the processing of the White Gel Coat were satisfactory.
View detail
Good build quality.
The mounting hole position was Exactly.
Only the orientation of the bracket holding the Rear Brake hose was changed.
Black Gel Coating, so it is painted before installation.
View detail
Is good
Installed on a TZr50R. I was informed of the delivery date when I placed the order and it took about 2 weeks to receive it. [Color] The OEM Chain Cover and Brake Hose Bolt was removed because it interfered with the OEM Chain Cover and Brake Hose, but the Chamber and Brake Hose seemed to hit each other, so the Hose was fixed to the Fender's Mesh with Tie Wrap. I am satisfied with the new look of the Rear. View detail
Large and Cool
I bought it because I set the Sprocket to a Large size to use it in Race, and it contacts with the NORMAL Rear Fender.
The position of the Chain Cover is also made higher, so it could be installed without any contact.
Fender is also getting cooler with a larger size.
View detail
Buy Rear Fender
I listened to the music with good texture and Stylish.
I was concerned that the NORMAL Rear Fender was too short and the Rear Shock would get dirty, so I am glad to hear that my worries have been solved?
View detail
Since the friend attached, it purchased. Attachment is dramatically easy and easy also for beginners. After attachment became very smart! It is admiration up custom rather than changing a muffler! Please try! In the direction which has rem
Since the friend attached, it purchased.
Attachment is dramatically easy and easy also for beginners.
After attachment became very smart!
It is admiration up custom rather than changing a muffler! Please try!
In the direction which has removed the exhaust air cleaner, it is recommended further!!
View detail
be fascinated by
Although it is a part that does not need to be installed, I did not expect such a drastic change in impression with such a simple installation. I can say with confidence that the parenthesis is too good. The installation is super easy, and it takes less than 10 minutes if you have a driver&Spanner&Pliers. The only thing I am worried about is that the area around the Sprocket is mesh and the clearance with the Chain is about 5mm, but it is around the Sprocket, so it should be large enough, right?
Paint "As a paint base..." but I would like to keep it that way for a while.
If I had to ask, I'd say another 20-30mm longer.
View detail
It is indeed made by a famous manufacturer
Installed on a 2019 YZF-R25
Installation was as simple as removing the OEM Chain Guard and fitting it in there
The texture is very good and the accuracy of the installation is also very good is coming out well, I bought the Black Gel one, so I'll paint it eventually! I think
View detail
It is quite good!
I purchased from the other Manufacturer 's Under Cowl that it was made for a long time.
If you remove Tire, it will be easier...
I installed it with lining clothes because it is a pain..
When the car bounces, it will inevitably interfere with the Accessory Case under Seat.
Because each one gets scratches, I cut off the bicycle Tube and stick it at the interfering position.
A little price is stretched but I think that it was good shopping.
View detail
It can be installed in Swingarm of Gcraft
It is for NSR 50, but it can be installed with KIJIMA 's Plating Tie Wrap to N - Craft' s NSR Linkless Type Swingarm Monoshock Triple Square with Stabilizer 0 cm Long.
Be careful as it will interfere with Tire unless the mounting position is set to be more than the traveling direction Front.
View detail
Squid!
I attached it to the green of the ninja1000 2012 formula. It is terribly cool. In order to have unity with other carbon parts, we made it twill weave. Originally it was a green fender, it was not dissatisfied with itself, it could have been as it was, but with other people's blogs wearing carbon, I had the impression that the whole was tight. Actually attached and it was right. The rear inner fender and the side cover are already replaced with carbon. Rear inner fender is a striker, side cover is Atech, tank protector is K's style and disjointed manufacturer, but there is no discomfort. The front fender of this time was troubled to the last with things made of clever wolf. Because I wanted a thoroughly feeling, it was because it was nice to have clay bowls made by Clever Wolf and also by Mr. Tsuchiya. Finally it became the deciding factor because we aim at the under cowl after this, because there is no under cowl as parts from Clevelow Wolf, because there is in Tendanya, we feel a sense of unity from the front fender to the close part of the under cowl In order to have it, I made it made by Tendanya. However, I still do not know the difference between Mr. Tsuchiya made and Nojima ... as you can see it looks the same ... (Maybe the sales route is different ...)
I will try to sell Parts that I did for the time being as Oakon as much as possible. I entrust it to a trader. I get an answer that Front fender can be sold. I saw the bidding in the past and I made a bid for it with a reasonable price, so it became a trigger for purchase as well. Sometimes I used Point 10 times Campaign, I feel that I could buy it considerably cheaply when combined with Oak sale.
The delivery schedule was initially planned to be over a month, but it was about 25 days after all.
I left the installation to Shop, but it seems to be easy.
Recommendation for people who want to get around the Front, and want a little upscale!
View detail
I'm going to post this review comment, because I know that many riders haven't exchanged their front fenders of 14R. I hope my review comment will be of some help. [Appearance]The front tip becomes a little shorter than the standard fender, bu
I'm going to post this review comment, because I know that many riders haven't exchanged their front fenders of 14R. I hope my review comment will be of some help.
[Appearance]
The front tip becomes a little shorter than the standard fender, but I like its compact appearance. Also, the sharp design is cool.
[Installation]
Not that difficult.
1. First remove 4 hex bolts.
2. Remove the harness clamp of the front brake.
3. Take off the original fender.
4. Tentatively assemble the new fender.
5. Install the removed harness clamp.
6. Fix it with the hex bolts. And it's done.
You might break the clamp if you apply extreme pressure when removing the harness clamp. I was able to take it off easily by spinning the clamp.
[Price]
I chose FRP black, because carbon ones were expensive. But it still cost me much.
[Overview]
I'm satisfied with it. What's left to be considered is its color-fading and durability problem.
View detail
The Design of this Fender is very pleasing! Although it has appeared in the Mini bike race by this Cowl recently, It is very conspicuous and the highest! Since it has not fallen by this Cowl, the intensity of the goods themselves is not known c
The Design of this Fender is very pleasing!
Although it has appeared in the Mini bike race by this Cowl recently,
It is very conspicuous and the highest!
Since it has not fallen by this Cowl, the intensity of the goods themselves is not known clearly, but since it is carrying out quite firmly in the attached touch, I think that it is satisfactory at all.
It uses with the black Gel, without also painting, since
exterior is black.
If
present state does not care about a fine thing, either, it is satisfactory at all.
I think that it is pleasing if I have you try once [
]!!
View detail
It is used for Ninja1000. attachment does not have the necessity for processing, either and was attached simply. Dirt of after [ attachment ] of a sheet flesh side also decreases, and appearance also becomes intrepid and is carrying it out
It is used for Ninja1000.
attachment does not have the necessity for processing, either and was attached simply.
Dirt of after [
attachment ] of a sheet flesh side also decreases, and appearance also becomes intrepid and is carrying it out to mind.
View detail
Do you think that they are goods in which tastes differ thoroughly? It may not be in the direction which rides by the TRACKER or a Ska tune. Since I fill between Rear-tire [ of a スカスカ APE ] absentminded to good touch, I am large satisfaction.
Do you think that they are goods in which tastes differ thoroughly?
It may not be in the direction which rides by the
TRACKER or a Ska tune.
Since I fill between Rear-tire [ of a スカスカ APE ] absentminded to good touch, I am large satisfaction.
View detail
The parenthesis of the fender of Saitaniya is good. appearance is perfect -- it is -- it carries out and fitting is also OK. The thickness of FRP is also enough. It is slightly uneasy to merely become fixation by the screw and a cable tie.
The parenthesis of the fender of Saitaniya is good.
appearance is perfect -- it is -- it carries out and fitting is also OK.
The thickness of FRP is also enough.
It is slightly uneasy to merely become fixation by the screw and a cable tie.
View detail
Although I think that it is not related to a run at all, the circumference of rear one becomes tight only by attaching this. He is smart although it becomes a cable tie stop. It is recommended in a direction to show the circumference of rear one a
Although I think that it is not related to a run at all, the circumference of rear one becomes tight only by attaching this.
He is smart although it becomes a cable tie stop.
It is recommended in a direction to show the circumference of rear one as greatly.
View detail