Reviews
Carefully made, beautiful
It is as if they are Japan's leading CowlManufacturer.
Everyone has their own taste in Design and I like this OEM chic. I also like that it is slightly extended!
Fitting may be a little bit necessary, it depends on the item, but I was able to install it without any modification. I was able to install it without modification. The holes are slightly long, so fine adjustment is possible.
View detail
The mud splatter was so bad.
[How is it used?
Commuting, Touring
Was the one you received as per Image?
Yes
Was the installation difficult?
Installation was easy, but I had a hard time getting my hand into the place to stop the lippet.
How was your experience with it?
Mud splatter was reduced.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
splash of mud
Rear tire mud splash prevention, looks good, so this is installed.
Works great for rain, puddles, and mud splashes.
It is a nice product with a nice look and feel.
However, the fixation method, Tie Wrap, is not quite right.
It is unfortunate that no consideration is given to prevent scratches from mounting and vibration.
Was it a bit unreasonably fixed? Long-term use seems to cause Cracks to enter without being noticed.
If the fixing method, scratches and cracks caused by vibration were taken into consideration, there would be nothing to say about this product.
View detail
I think it's a very effective part.
The OEM Product is small and does not have the length in the back direction, so the Fender Eliminator KIT is replaced and the mud splatter is noticeable, but this Fender has good length and shape, and it also serves as a chain cover, so installation was easy. For budget reasons, I decided to go with the Black Gel Spec. instead of the Carbon Material. [Color] ClearI just painted it and installed it and watched it. View detail
Material:Carbon Style is very Parenthesis and easy to clean!
[How is it used?
I go to Touring and mountain passes exclusively.
Material for dress-up purposes:I purchased this product from Twill Weave Carbon.
Was the one you received as per Image?
The Chain Guard was thicker than I imagined than the OEMRear Fender. Other than that, it was generally as Image.
Was the installation difficult?
To install, simply remove the four Hexagon Socket Bolts, remove the OEM Rear Fender, and install this product.
You don't need any special skills to dress-up!
How was your experience with it?
It is designed to be 10cm longer than OEMRear Fender, and you can feel the effect in rainy weather. unlike OEMRear Fender, the surface is smooth and easy to wash and maintain.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
I have installed an external Swing Arm Cover on my car, but the Left Side Swing Arm Cover interfered with the Rear Fender Left Side, and the Hexagon Socket Bolt did not fit completely. Fortunately, it can be fixed, and I will file the lower part of Rear FenderLeft Side later.
Material:Carbon Style is very Race ish, Parenthesis is good and easy to maintain.
View detail
Custom motorcycle requires ingenuity.
If it is OEM Exhaust System, it may not hit, but because Exhaust System was exchanged, the product was caught between Swing Arm and Exhaust System, and when Suspension contracted, it made a creaking sound, but when Aluminum spacer was put in Tandem hook which fixed Exhaust System, it was perfect. However, when I inserted the aluminum spacer into the Tandem hook which fixed the Exhaust System and Offset the Exhaust System, it was perfect.
It is necessary to devise the installation according to the state of the motorcycle, but the state that puts it on is Parenthesis good.
View detail
It can be installed with no problems.
There are many cases in which carbon parts may need to be processed to be installed depending on the manufacturer.
The Saitaniya Front Fender was easy to install with no such problems at all.
Also, the Carbon parts are beautiful and highly satisfying.
Recommends to Dress-up
View detail
I am satisfied overall as an individual.
Inner fender wanted to install from before. Various from various companies have been released, but I wanted a long item of Chain cover and I tried it with Mr. Gendaiya. (In order to save labor of painting Material : Carbon Style)
Regarding the installation, we made a process such as scraping the gold tool that stops Brake hose. (My car is an ABS car)
Other than that it was possible to install without problems.
I do not know the effect yet, but under Seat it seems to get less dirt!.
View detail
Attention to Rear brake
I installed it in HORNET 250. Black Gel As it is, I think that it can be used without problems until it fades. The installation was easy without having to remove the Tire. However, since Brake hose interfered with the corner of Fender and Brake's handedness became worse, I handled the interference part with File and handled it. Design likes it because there is a difference with other Manufacturer's Rear Fender. View detail
It is a good item.
I bought it for installation on my car NS - 1, ordering and the delivery date is too long for a while, I was tired of waiting.
The item that I received was as shown in the picture image, but handmade !! Material : It can not be helped because it is FRP.
Painting completed, installation completed, it was easy to install.
When compared with the appearance before installation, it became Sporty, satisfied !!
View detail
It is cool finish.
Fender about OEM's Battery cover In rainy day Seat Back and underbody were dirty so it looked good for mudguard so I bought it.
Since it interferes with Chain as it is, it will not interfere if the screw hole is widened and shifted toward you and the Washer is caught and the height is made.
And as it is about Fender which is about Battery cover of OEM, as it is it will interfere with Gendaya Rear Fender when climbing the step, so we need to disconnect it.
The Reverse side of Mesh 's web part is stuck with Bond to join the net and Fender part, but its Bond is thick and interferes and it looks a little dirty.
If it was a little more accurate, it was star 5, but it was a Level somehow made possible by processing, so it was satisfactory because Rear around was cool and the back and Seat back became dirty!
View detail
Mounting on VTR 250 '07
Installation is simple. Remove the original Guard and stop Brake hose If you also remove Screw, just put on it. Easy to remove.
The appearance is cool, and the dirt under Seat has also been improved somewhat. It looks rather dirty than the appearance Custom element is Large.
Tire makes things that are relatively big and big, but I can afford it at all.
Chains will interfere with steps etc.. As long as you do not mind, if you increase Sprocket to Large, not only the sound but also the Fender itself can be trimmed, so if you install it, it may be nice to turn on Sprocket Small.
I do not mind, so I'm attaching Large Yi.
View detail
This is pretty
As for what I care about with Rear Fender of STD Shape, it is a joint with Swingarm. The feeling of taking - - -.
Arm itself is a corner Pipe after all, so I can not do anything to be poor, but if I attach it, it feels like a little better.. In addition, I am expecting for protection purpose by Full cover and mudguard effect by long Fender part.
As Full covered type, there are other A-TECH products. The reason for choosing this compared to that is that there is a Chain cover and that it does not cover Brake Caliper so you do not have to remove it even during Maintenance. And with a bonus Sprocket guard is attached.
Just because the tip of Right Side was cut off halfway, I wanted you to extend it to the end just like Left Side.
I tried to paint with frosted black How about you. Manufacturer product image (Leave as Black Gel) Please compare with. The Screw hole was Exactly this time.
View detail
I decided to installed this part by looking at customer reviews. About the part finishing; the surface of inner portion, hitting the arm, was really rough, so I filed it to make smoother. Moreover, the edge was still too sharp, so I re-finished by
I decided to installed this part by looking at customer reviews.
About the part finishing; the surface of inner portion, hitting the arm, was really rough, so I filed it to make smoother. Moreover, the edge was still too sharp, so I re-finished by sand papers to round off.
About the installation; I needed some modification since I have the XR100 motored swing arm.
I cut part of the mesh portion in order to match the hook location for the brake hose mounting.
This is 4cm longer than APE standard and so the wheel shifted back accordingly. This created bigger gap between the fender and wheel which I did not like much, but I could installed nicely at last.
View detail
I installed it to my APE100 although this is for NSR50/80 originally. I have the OEM fender but it'll be removed and I wanted to prevent dirt to the shock portion, so I decided to install this rear fender. No modification added, just tie
I installed it to my APE100 although this is for NSR50/80 originally.
I have the OEM fender but it'll be removed and I wanted to prevent dirt to the shock portion, so I decided to install this rear fender.
No modification added, just tie by a cable tie.
so it took 5-10mins, very easy.
It interferes to the OEM chain guard,
so if you put the chain guard, you need to cut the fender partially. And actually I did so and mounted.
I am happy about both looking and practical use.
View detail
Ninja1000 is equipped. It became somewhat longer than a pure Fender, and appearance also became stylish touch. Although the Clearance in particular of attachment was also satisfactory, a Rear brake hose interferes for a while.
Ninja1000 is equipped.
It became somewhat longer than a pure Fender, and appearance also became stylish touch.
Although the Clearance in particular of
attachment was also satisfactory, a Rear brake hose interferes for a while.
View detail
[Webike Monitor] Although it wavered with the product made from a Striker at the beginning, , cheap a little but, and since the Lowdown was carried out, it decided here the point more than in which the circumference of a Shock may interf
[Webike Monitor] Although it wavered with the product made from a Striker at the
beginning,
,
cheap a little but, and since the Lowdown was carried out, it decided here the point more than
in which the circumference of a Shock may interfere.
The screw hole of
actual thing suited perfectly for Carbon products, and it required only clear paint.
When removing the right Step and Silencer both sides, it was easy, but since Gasket exchange was troublesome,
laziness of
attachment was done, and it worked by 6 angle Wrench of the Short head, having loosened the Screw little by little.
I think that a Screw will be certainly licked if honest tools, such as PB, are not used since the
Screw lock is applied.
It is comfortable, even if the good
O point
Design matches the highest and is said to be pure.
Since the wiring Stay of a regrettable
O point
ABS sensor does not suit the form of a Fender main part delicately, three M6 Washers are piled up and put in.
There is a difference of the place where the eye of the
Carbon cross is beautiful, and a suitable place.
View detail
The thing of the black Gel was purchased. If it does not care about a fine cousin even if it does not paint, I also regard the present state as beautiful enough. Although the paint application premise was thought, the Cable-tie (smile) fixation currentl
The thing of the black Gel was purchased. If it does not care about a fine cousin even if it does not paint, I also regard the present state as beautiful enough. Although the paint application premise was thought, the Cable-tie (smile) fixation currently used as it is was fixed with the pure Fender hole just for a moment using the Stay by that of uneasy だっ. View detail
[Webike Monitor] It was used for TZR 50R. That the position of the hole was shifted delicately, and since the Brake Disk bolt had interference, they are four stars. Appearance was beautiful also with the black Gel.
[Webike Monitor] It was used for
TZR 50R.
That the position of the hole was shifted delicately, and since the Brake Disk bolt had interference, they are four stars.
Appearance was beautiful also with the black Gel.
View detail
He has a feeling in which appearance underfoot became brave. It became very good touch. The rest should take care so that a cable tie does not interfere. w in which it had interfered at first
He has a feeling in which appearance underfoot became brave.
It became very good touch.
The rest should take care so that a cable tie does not interfere.
w in which it had interfered at first
View detail