Reviews
Expectations for Effectiveness
I didn't feel any inconvenience with OEM parts, but I decided to choose Other Brand Product because Tandem seat has poor parenthesis and Single cover is too expensive. I was expecting to be able to install and remove the OEM parts as described, but the size is too small and the installation is unexpectedly large. I wish it was a little easier to install and remove.
Also, the Seat width is wider, so the footing is obviously worse.
View detail
For Paint Base
[How is it used?
I was going to install a Chinese Cowl on my MC21, but after waiting for it to arrive after ordering, I cancelled the order and chose Saiya.
The OEM used Cowl is now enough to buy one Scooter....
Was the one you received as per Image?
Upper and SIDE (Under integrated) Of Quantity:Consists of 1 Set of 3pcs.
Screws and Nut for installation were included as described.
The finish of the paint is good because it is a gel coat that is supposed to be painted, but there are foreign objects on the edges. (probably a pool of FRP resin) The workmanship was not perfect, to be honest, because there were
Was the installation difficult?
In past Impressions, it was mentioned that the mounting holes on the Upper and SIDE were misaligned, but I had no problem with that.
Screws for fixing without any additional drilling (both with the body side, of course) could be fixed. (The photo shows a temporary fastening, so some parts may not be attached.)
However, Headlight could not be installed no matter how hard I tried, so I redrilled the fixing holes.
Also, unlike OEM, there are fewer Product Contents, which is good for ease of installation, but all SIDE and UNDER parts must be removed for maintenance.
How was your experience with it?
Material:The FRP is strong, so it is not at all PeLePera like Chinese Cowl.
As for the CowlDesign aspect, it is somewhat similar to OEM, so it is recommended for both preserving valuable OEMCowls and for Restore of vehicles without Cowl.
As expected, White Gel will float if left as is, so it would be good for those who can paint to some extent.
[Included Parts:were they on?
Screws and Nuts are included, but some of the fixing Rivet for the Screen and Fixing Screws to the car body are required separately.
[Was there anything that disappointed you?
It would have been a perfect score if only the finish on the edge and the position of the hole for the Headlight could be improved.
【Review】
Material:It is good that the FRP is strong and has little risk of breakage.
Although external cowl always has a hole position problem, I was able to install the cowl without any difficulty.
Since OEMCowls are becoming more and more difficult to obtain, it is quite nice to paint FRP Cowl in your own way.
View detail
For Circuit
The Tandem Footpeg was not installed because it interfered with the Chamber guard, but after removing the Tandem Footpeg, Chamber guard, and security parts, etc., the Exhaust System outlet holes did not need to be aligned to fit, However, because of the removal of the Chamber guard, only two fixing points were left at the front. I am planning to modify the rear part to have more fixing points. View detail
Saitaniya Saitaniya Under Cowl Gel coat products
The packaging is very well made, and the installation bracket was easy to install. I was satisfied with my purchase. View detail
Processing Required
The Upper CowlRight Side interfered with the Radiator, so it was shaved off. (Radiator is OEM) The OEM Cowl is too bad to work with, so if you want to go to Circuit, I think it's a must have item. View detail
Just as I expected
Side cowl meshing with the cowl is a concern, but it is solid and a little bit of a running session, etc This is a good product for those who drive sports It also looks like a Racer
If you are running Sports, you may have to pay some Gold for the Oil treatment in some places In the unlikely event of a leak on a public road, it can stay in the oil receptacle
If you roll the oil, it may lead to a large problem, so you need to take the trouble It is also effective in avoiding the problem
View detail
Good because it can be installed without any processing
I think it's great that the screws can be used for OEM use and can be installed in the OEM Cowl with no modification
The chili is not quite right, or there was a feeling that the Screw hole is a little bit Gap It was able to be installed without any modification
The accuracy is decently good for an external cowl
It has an oil catch function, and the design is well matched to the overall design Recommendation
I have the Babyface Rear Sets on and they don't interfere
Because the car's body color is Matte Black, it will inevitably float if it is Finished with Luster Because Matte [Color] Clear and OverCoat
Tank Cover and Silencer coveretc. are also made to Luster erase in the same way It is
View detail
Fits: Others
It's great for Makeover!
Even before I purchased the SV, I wanted to do something about the Front, and I was attracted to this product
I like the design and the image chain, but the quality of the product is not as good as it should be
It can be covered to some extent for painting
I'm a little concerned about the holes in the FRP BALI
Just nice parenthesis
View detail
Full Cowl RAM Duct Cutline
Full Cowl RAM Duct Cutline Full Cowl RAM Duct Cutline Full Cowl RAM Duct Cutline View detail
Fits: HONDA RVF400
The whole looks tight!
Attention is necessary as Upper Cowl seems to be damaged when installing, but installation is very easy. Since Screw to be fixed can not use OEM's as it is, a longer Screw is necessary. It looks so tight when looking at the whole a little more than looking at nearby It is very cool! View detail
It should not be bad
Because we changed Exhaust System to Other Company Product, we could not install it unless it was machined. Other than that I think it's wonderful. I think that it is good if it is easy to understand because the Instruction Manual is also attached firmly. View detail
Great looking piece
great looking one eye, looks even better if you paint the two pieces different colours. mine doesnt fit %100 because my H bar is a bit bent and warps the fairing a little but still very impressed with how great it makes my bike look. View detail
Gold amount is - - -
Actually I wanted Carbon but the amount of money FRP
This price is the best because it is good at making this price.
S1000RR (15) I can not install without removing Inner cowl, but I cut off the Inner cowl and attached it.
OEM Product I want to see the atmosphere is good.
View detail
Satisfied with Cost performance
Material : In most cases, FRP products, mounting holes etc.. Although it is necessary to fine adjust the mounting hole Expansion of the mounting hole Largeetc. We made a fine adjustment of.
I think that the whole product Quality is satisfactory. I appreciate just being able to lineup the For StreetCowl of the vehicle 20 years ago.
View detail
Satisfied with Cost performance
For Fitting installation hole expansion Largeetc. It was necessary to modify. Material : I think FRP products need some processing and I think that Level is acceptable as I recognize it. Others There was no problem with the overall construction, but one disappointing place on the mating face with Upper Cowl Quantity : Pair (for Left and Right) Both had distortions.
I wanted to fix it, but I did not have that technology, so I left it as it was - - - - - - - -. I am pretending I do not see it now. However, compared with the time when ZXR was the current vehicle, the population of Motorcycle dropped, then at that time there were about as many stars as FRP Cowl Production Manufacturer was out of business, please lineup the For Street FRP Cowl of the vehicle 20 years ago I appreciate being there..
View detail
Fits: HONDA RVF400
8 Image resistant
For this Motorcycle, this Number Seal Cowl suits you well. Since this product is in Black Gel state, it can be used as it is, but it was subjected to ground processing, subjected to Black Painting and Clear finish and worn. However, there is quite a gap on the Air duct side. From the beginning, there was a gray color net in that part, but since it seems to make no sense, it was removed.
(Upper Cowl seems to be scratched) I usually run with Twin Light instead of Single Light.
View detail
It's like S1000RR
Center cowl of Tendanya (Gel) When
Under Cowl (Carbon) is.
If you do not set the Full Exhaust System, NORMAL's drum?
Is conspicuous, if this Cowl
It covers as shown in the picture.
For installation, NORMAL's Inner
Cowl (Shroud) Need to remove
There is, even if there is no Inner
There is no problem in terms of strength.
There are no adjustments such as installation OK soup stocks
I think that it is good for COSPA.
View detail
Good appearance and good quality, I like the color. It suits my bike but unluckily it is not with the headlight together.
Good appearance and good quality, I like the color. It suits my bike but unluckily it is not with the headlight together. View detail
When installing to this cowl, some nuts can not be attached. (Because the hole size of the screw doesn't fit, etc.)In addition, you need to spend time and effort when connecting a headlight. For example, it is required to disassemble a cable and p
When installing to this cowl, some nuts can not be attached. (Because the hole size of the screw doesn't fit, etc.)
In addition, you need to spend time and effort when connecting a headlight. For example, it is required to disassemble a cable and process it again.
But if you choose to turn a blind eye to it, I think that it is a really good product. (It is possible to fix a cowl.)
View detail
I fell in love with the appearance.An exhaust of my vehicle is a YOSHIMURA hand-bending titanium cyclone (Product No. 110-406-8881).I processed the cowl so as to suit it to the exhaust as shown in the picture. I cut a hole (the upper of th
I fell in love with the appearance.
An exhaust of my vehicle is a YOSHIMURA hand-bending titanium cyclone (Product No. 110-406-8881).
I processed the cowl so as to suit it to the exhaust as shown in the picture. I cut a hole (the upper of the picture) in the place where the exhaust intersected.
The small hole in the lower of the picture is for oil exchange. I am not sure if the hole will work or not because I haven't used it yet.
Since I made the holes, I reinforced some parts of the cowl in putty.
It is not easy to detach the exhaust because you need to remove the exhaust first.
I will post a picture once I fnish installing the cowl.
View detail