Reviews
This is pretty
As for what I care about with Rear Fender of STD Shape, it is a joint with Swingarm. The feeling of taking - - -.
Arm itself is a corner Pipe after all, so I can not do anything to be poor, but if I attach it, it feels like a little better.. In addition, I am expecting for protection purpose by Full cover and mudguard effect by long Fender part.
As Full covered type, there are other A-TECH products. The reason for choosing this compared to that is that there is a Chain cover and that it does not cover Brake Caliper so you do not have to remove it even during Maintenance. And with a bonus Sprocket guard is attached.
Just because the tip of Right Side was cut off halfway, I wanted you to extend it to the end just like Left Side.
I tried to paint with frosted black How about you. Manufacturer product image (Leave as Black Gel) Please compare with. The Screw hole was Exactly this time.
View detail
When installing to this cowl, some nuts can not be attached. (Because the hole size of the screw doesn't fit, etc.)In addition, you need to spend time and effort when connecting a headlight. For example, it is required to disassemble a cable and p
When installing to this cowl, some nuts can not be attached. (Because the hole size of the screw doesn't fit, etc.)
In addition, you need to spend time and effort when connecting a headlight. For example, it is required to disassemble a cable and process it again.
But if you choose to turn a blind eye to it, I think that it is a really good product. (It is possible to fix a cowl.)
View detail
I'm going to post this review comment, because I know that many riders haven't exchanged their front fenders of 14R. I hope my review comment will be of some help. [Appearance]The front tip becomes a little shorter than the standard fender, bu
I'm going to post this review comment, because I know that many riders haven't exchanged their front fenders of 14R. I hope my review comment will be of some help.
[Appearance]
The front tip becomes a little shorter than the standard fender, but I like its compact appearance. Also, the sharp design is cool.
[Installation]
Not that difficult.
1. First remove 4 hex bolts.
2. Remove the harness clamp of the front brake.
3. Take off the original fender.
4. Tentatively assemble the new fender.
5. Install the removed harness clamp.
6. Fix it with the hex bolts. And it's done.
You might break the clamp if you apply extreme pressure when removing the harness clamp. I was able to take it off easily by spinning the clamp.
[Price]
I chose FRP black, because carbon ones were expensive. But it still cost me much.
[Overview]
I'm satisfied with it. What's left to be considered is its color-fading and durability problem.
View detail
Installed on my 2014 Ninja250. Got a Lime Green Gel Coat. I thought it's fine with a bit of color difference, so I installed it without giving it a paint job. The color is a bit different from the tank, but since they expect you to repaint it,
Installed on my 2014 Ninja250.
Got a Lime Green Gel Coat.
I thought it's fine with a bit of color difference, so I installed it without giving it a paint job.
The color is a bit different from the tank, but since they expect you to repaint it, if it bugs you I suggest painting it.
Installed it with double-sided tape.
The shape is made to perfectly fit the shape of the tank, and the backside was smooth enough that the tank wouldn't get scratched.
For me, I tried to perfect it, but after a few tries reasoned with myself that it sticking out from the front of the seat a bit was good enough.
It's probably my fault, so if you mark the location before using the tape, you should be able to do it perfectly.
Using it, I can support with my lower abdomen, and knee gripping is made easier, so it's not just for looks.
Looks good+better function, so I recommend this.
View detail
I fell in love with the appearance.An exhaust of my vehicle is a YOSHIMURA hand-bending titanium cyclone (Product No. 110-406-8881).I processed the cowl so as to suit it to the exhaust as shown in the picture. I cut a hole (the upper of th
I fell in love with the appearance.
An exhaust of my vehicle is a YOSHIMURA hand-bending titanium cyclone (Product No. 110-406-8881).
I processed the cowl so as to suit it to the exhaust as shown in the picture. I cut a hole (the upper of the picture) in the place where the exhaust intersected.
The small hole in the lower of the picture is for oil exchange. I am not sure if the hole will work or not because I haven't used it yet.
Since I made the holes, I reinforced some parts of the cowl in putty.
It is not easy to detach the exhaust because you need to remove the exhaust first.
I will post a picture once I fnish installing the cowl.
View detail
I decided to installed this part by looking at customer reviews. About the part finishing; the surface of inner portion, hitting the arm, was really rough, so I filed it to make smoother. Moreover, the edge was still too sharp, so I re-finished by
I decided to installed this part by looking at customer reviews.
About the part finishing; the surface of inner portion, hitting the arm, was really rough, so I filed it to make smoother. Moreover, the edge was still too sharp, so I re-finished by sand papers to round off.
About the installation; I needed some modification since I have the XR100 motored swing arm.
I cut part of the mesh portion in order to match the hook location for the brake hose mounting.
This is 4cm longer than APE standard and so the wheel shifted back accordingly. This created bigger gap between the fender and wheel which I did not like much, but I could installed nicely at last.
View detail
I installed it to my APE100 although this is for NSR50/80 originally. I have the OEM fender but it'll be removed and I wanted to prevent dirt to the shock portion, so I decided to install this rear fender. No modification added, just tie
I installed it to my APE100 although this is for NSR50/80 originally.
I have the OEM fender but it'll be removed and I wanted to prevent dirt to the shock portion, so I decided to install this rear fender.
No modification added, just tie by a cable tie.
so it took 5-10mins, very easy.
It interferes to the OEM chain guard,
so if you put the chain guard, you need to cut the fender partially. And actually I did so and mounted.
I am happy about both looking and practical use.
View detail
It purchased to TZR 3MA 89 models.Although it might be an unavoidable thing which is been a handmade article and which accumulates, compared with brand-name parts, it was thought too that structure was coarse. The position of the hole where
It purchased to TZR 3MA 89 models.Although it might be an unavoidable thing which is been a
handmade article and which accumulates, compared with brand-name parts, it was thought too that structure was coarse.
The position of the hole where
(1) Silencer passes along the point worried concretely has shifted.There is a linear dent on
(2) Cowl surface in some places (refer to picture).It is distorted on the Level which the form of the whole
(3) Cowl looks at and understands by the eye, and is right-and-left asymmetry.The hole for Cowl attachment by the side of
(4) front is located to an edge in the last place, and it is likely to be divided even if it sees to layman's appraisal.There are only four
(5) Cowl fitting parts, and they are slightly uneasy.It is.If all are the broader-minded ones, it may not be worrisome, but since I am a Type which cannot sleep night also, either when I am nervous and am worried, I am putting in and using the hand in the made range.
Although only bad points were written, I appreciate that I am having the Cowl of front vehicles made for 20 years or more.
View detail
He wanted to attach this Cowl and the exterior purchased RVF [ tatter ].Although time was taken somewhat, there was worth for which it was waiting in the delivery date.He has changed thick and admired the place where intensity is required for making
He wanted to attach this Cowl and the exterior purchased RVF [ tatter ].Although time was taken somewhat, there was worth for which it was waiting in the
delivery date.He has changed thick and admired the place where intensity is required for making
.
Incidentally, a Sticker is Yahoo! Auctions and it carried out paint application and attachment by itself.A Fitting is very a product which feels a maker's prejudice, although some adjustment technique is required.
View detail
He somewhat wants a Volume in the car-body lower part, and it purchases in it. It is said that it can be used as it is in a Circuit since it is Oil-catch structure. I think that it can be attached if there is attachment by 10 5~since it is attac
He somewhat wants a Volume in the car-body lower part, and it purchases in it.
It is said that it can be used as it is in a Circuit since it is
Oil-catch structure.
I think that it can be attached if there is
attachment by 10 5~since it is attachment using the hole which is on the Side-cowl lower part and the flesh side of a Front tire from the first as it is.
The
Fitting was also surprised considering the external article by the Exactly.
He was a Beauty, so that he called [ or ] it, if
him could attach as it is although he did clear chisel paint application and attached.
View detail
Although a Bolt hole is revacated in the case of attachment or it is necessary to extend, it can attach firmly. Since there was nothing so that interference with the Muffler was also worried, I am satisfactory.
Although a Bolt hole is revacated in the case of attachment or it is necessary to extend, it can attach firmly.
Since there was nothing so that interference with the
Muffler was also worried, I am satisfactory.
View detail
Fits: HONDA NSR80, HONDA NSR50
Although it had participated in the Race in NSF, I had you paint by Paint Schopp of an acquaintance by this Full cowl set, and it became the highest result. It is the touch which can be hard to break even if it is strong and falls with the goods whi
Although it had participated in the Race in NSF, I had you paint by Paint Schopp of an acquaintance by this Full cowl set, and it became the highest result.
It is the touch which can be hard to break even if it is strong and falls with the goods which were able to improve very much.
Since the
Design is smart anyhow, it is recommended.
It will be the highest if a sheet falls back to a slight degree!!
It can use for a long time, and since that is right, I think that a Cost is also cheap!
View detail
The Design of this Fender is very pleasing! Although it has appeared in the Mini bike race by this Cowl recently, It is very conspicuous and the highest! Since it has not fallen by this Cowl, the intensity of the goods themselves is not known c
The Design of this Fender is very pleasing!
Although it has appeared in the Mini bike race by this Cowl recently,
It is very conspicuous and the highest!
Since it has not fallen by this Cowl, the intensity of the goods themselves is not known clearly, but since it is carrying out quite firmly in the attached touch, I think that it is satisfactory at all.
It uses with the black Gel, without also painting, since
exterior is black.
If
present state does not care about a fine thing, either, it is satisfactory at all.
I think that it is pleasing if I have you try once [
]!!
View detail
It is used for Ninja1000. attachment does not have the necessity for processing, either and was attached simply. Dirt of after [ attachment ] of a sheet flesh side also decreases, and appearance also becomes intrepid and is carrying it out
It is used for Ninja1000.
attachment does not have the necessity for processing, either and was attached simply.
Dirt of after [
attachment ] of a sheet flesh side also decreases, and appearance also becomes intrepid and is carrying it out to mind.
View detail
Although it is not as be too large, it is shameful, attaches and does not shine. What did you consider and did it make it so huge? Since it was an angle which will seemingly be pure and is visible, it was deluded with the photograph.
Although it is not as be too large, it is shameful, attaches and does not shine.
What did you consider and did it make it so huge? Since it was an angle which will seemingly be pure and is visible, it was deluded with the
photograph.
View detail
Ninja1000 is equipped. It became somewhat longer than a pure Fender, and appearance also became stylish touch. Although the Clearance in particular of attachment was also satisfactory, a Rear brake hose interferes for a while.
Ninja1000 is equipped.
It became somewhat longer than a pure Fender, and appearance also became stylish touch.
Although the Clearance in particular of
attachment was also satisfactory, a Rear brake hose interferes for a while.
View detail
A really good and practical tank pad. I especially like the fact that it covers/protects a wide area of the tank. Many people have asked me where I've bought this pad as it is unique in Malaysia. Malaysians be aware there is customs charge on the item
A really good and practical tank pad. I especially like the fact that it covers/protects a wide area of the tank. Many people have asked me where I've bought this pad as it is unique in Malaysia. Malaysians be aware there is customs charge on the item @20%. Add that to your cost. View detail
I bought one and based on the promise of elegance and style. I was not disappointed, it looks better than the pictures and fits perfectly. I had a little customized painting done and the bike just get comments of admiration from fellow 250 owners.
I bought one and based on the promise of elegance and style. I was not disappointed, it looks better than the pictures and fits perfectly. I had a little customized painting done and the bike just get comments of admiration from fellow 250 owners. View detail
[Webike Monitor] Although it wavered with the product made from a Striker at the beginning, , cheap a little but, and since the Lowdown was carried out, it decided here the point more than in which the circumference of a Shock may interf
[Webike Monitor] Although it wavered with the product made from a Striker at the
beginning,
,
cheap a little but, and since the Lowdown was carried out, it decided here the point more than
in which the circumference of a Shock may interfere.
The screw hole of
actual thing suited perfectly for Carbon products, and it required only clear paint.
When removing the right Step and Silencer both sides, it was easy, but since Gasket exchange was troublesome,
laziness of
attachment was done, and it worked by 6 angle Wrench of the Short head, having loosened the Screw little by little.
I think that a Screw will be certainly licked if honest tools, such as PB, are not used since the
Screw lock is applied.
It is comfortable, even if the good
O point
Design matches the highest and is said to be pure.
Since the wiring Stay of a regrettable
O point
ABS sensor does not suit the form of a Fender main part delicately, three M6 Washers are piled up and put in.
There is a difference of the place where the eye of the
Carbon cross is beautiful, and a suitable place.
View detail
It seems that it is impossible although it thought whether a pure Chain guard would possibly reach even when it is unprocessed although is it a part and crawled.If not attached, I will want you to also make the portion which carries out instead of [ of a
It seems that it is impossible although it thought whether a pure Chain guard would possibly reach even when it is unprocessed although is it a part and crawled.If not attached, I will want you to also make the portion which carries out instead of [ of a Chain guard ], and to crowd it. View detail