Reviews
Pre-cut and inexpensive
I usually buy rubber mats and cut them, but this product is pre-cut and at this price, so there is no extra hassle.
Grip is also good.
View detail
Tire and road surface conditions can be monitored through the butt
[How is it used?
Sports driving on mini circuits 80%, open road 20%.
Was the one you received as per Image?
Gel Coating. [Color] Used as is without blowing Clear, no problems
How was your experience with it?
Good Fee Ring in Mini circuit
[Points to note]
On public roads, the vibration will (of course) come to the buttocks, and with Gap, etc., be careful because it will hit your cervical vertebrae!
How did it compare to other products?
No comparative products were available.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think the size of Seat rubber is too small.......
View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Small modification required
I wanted to improve the grip at a track meet, but not enough to install a race cowl, so I decided on this product.
Weight is approximately 950g, a slight increase in weight from OEM (FRP).
Color because it will get dirty with Rubber replacement.:It is unpainted, but the matte texture makes it feel comfortable as it is.
The installation of the product was partially interfered with by the body of the car. The installation itself could have been done without modification, but we did not want the stress to be concentrated and cause cracking.
Fitting is otherwise good, and the rear end, which had a wide gap in the company's 10R model and seemed prone to water and dust infiltration, is now better aligned.
The attached rubber was already cut, but I beveled it with File because the Edge was going to be damaged.
The installation was a few Bolts, but it was unexpectedly time-consuming due to its location in a narrow space, and I was thinking of switching to NORMAL depending on my mood, but it was such a hassle that I didn't feel like doing so.
Wet type rubber is attached. The gripping feeling is very large, but it is difficult to shift a little while sitting on it because it grips as if it is attached.
The sponge also feels resilient to the touch, but when you sit on it, it feels chica-chic and is not suitable for everyday use.
(It's RaceParts, of course, but I was thinking of using them on a regular basis because they are a pain to replace)
View detail
Satisfied with Design
I was looking for replacement parts for OEM parts that had deteriorated over time, so I'm glad I found them.
I was concerned about the installation method, which is not shown in the picture, but Instruction Manual is included and it is easy to install. 。
Since the Tire size was increased this time, the Bracket was set to "Quantity" in the Home center.:2pc. Set(Quantity):Pair (for Left and Right) The installation position was corrected by purchasing an additional (1).
The material quality of the product and the processing of the White Gel Coat were satisfactory.
View detail
I'm glad it arrived on the promised date.
It arrived well packaged and intact on the promised date, but the ending was a bit disappointing.
There are places that look broken...
However, it was easy to install and I think it is a very satisfactory product if you are a little careful.
You will be able to see my bike change a lot in just a short amount of time...
I know that the knee grip is better thanks to the shape of the tank cover.
If the knee grip is disappointing, it may be a functional tuning rather than a simple emotional tuning.
-------------------------------------------------- -------- It arrived well packaged and intact on the promised date, but the ending was a bit disappointing. There are places that look broken... However, it was easy to install and I think it is a very satisfactory product if you are a little careful. You will be able to see my bike change a lot in just a short amount of time... I know that the knee grip is better thanks to the shape of the tank cover. If the knee grip is disappointing, it may be a functional tuning rather than a simple emotional tuning. Powered by Google Translator
View detail
s1000rr k67 Material:Twill Weave Carbon
Installed on s1000rr 2020.
The OEM cowl is covered over the OEM cowl and installed with four Bolt On locations.
It is easy to work with and has a great dress-up effect. I like it very much!
View detail
It's pretty~
최고에오About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Saiya Exclusive Screen for Cowl
[How is it used?
Used in YZF-R1 Race base car (2017).
Was the one you received as per Image?
It is exactly as shown in the Image. The manufacturer's thoughtfulness can be seen in the anti-scratch Film that was attached when the product arrived.
Was the installation difficult?
It is an Exclusive Screen for Cowl by the same Manufacturer, so it can only be attached as it is attached.
Rather than fastening the Bolt one by one, it is easier to install the Bolt by first temporarily fastening it sparsely and then tightening it at the end.
How was your experience with it?
The Screen position is higher than OEM, so it is easier to get down in a straight line and the visibility is much better. [Color] I was amazed at the Clear. No distortion at all.
[Included Parts:were they on?
ScreenBody and Screen bolt are included.
View detail
Knee grip is easy!
It was installed with only Circuit use in mind.
It's easier to knee grip.
It looks good.
View detail
I was able to install it on my New Model XSR900 without any problems.
I purchased this product before the New Model XSR900 was released, and I was worried at first that I might not be able to install it.
I wanted to ask a paint shop to install it on my car body color as soon as possible. I didn't have the skill to install it myself, so I asked a Motorcycle shop to do it for me and the labor cost was about 5500 yen.
Before I installed this, it was a foreign-made Under Cowl, but I am very glad that I purchased it because it hides the OEM exhaust system completely, which doubles the goodness of the Parenthesis.
View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Great sport seating position, good for city as well!
I am 175cm tall, and after installing the seat, I am able to stand on the balls of both my feet. WIth the original seat, I am able to place both feet flat on the ground. The raised seat makes me lean forward slightly more, reminding me to grip the tank with my legs rather than leaning on my wrists. Seating position is more sporty compared to OEM seat, i.e. sitting on top of the bike rather than inside the bike. Comfort is perfectly fine for street. If it is too harsh, perhaps you can adjust the compression and rebound settings on rear shock. Installation is easy - you will have to partially remove the side fairings to access some screws. It is NOT a drop-in replacement. Access to battery and fuses will be inconvenient after installing as you will need to remove fairing, screws and seat mount, before accessing battery and fuses. (It should not matter much but good to know information). Be careful not to strip the OEM bolts near the tank, they are very soft. Deduct one point as rubber seat provided has holes that are not very accurately cut, impacting the positioning somewhat. You might be luckier than me. Product shipped about 1 week earlier than estimated. Overall very satisfied. View detail
Sataniya Tank Pad
The Tank pad design is sleek and aerodynamic, which makes the tank to appear bigger. The tank pad shape is also comfortable to clamp the rider's legs onto ensuring bike control in corners. View detail
This was required after Inner cowl removal of OEMCowl.
[How is it used?
I removed the in-cowl to improve serviceability during MachineMaintenance after the Sports run,
The Meter cannot hold as it is and is used to prevent this.
Was the one you received as per Image?
Simple structure, but functional enough.
Was the installation difficult?
Once the inner cowl is removed, the Bracket itself is easy to install.
How was your experience with it?
The Meter does not shake due to vibration and is very rigid. Durability is yet to be determined.
[Included Parts:were they on?
Screws necessary for installation were included.
[Was there anything that disappointed you?
nothing special
Other items that would be helpful
Originally designed for racing cowl, but can be installed on OEM OuterCowl.
An Instruction Manual was also included and we had no trouble installing it.
View detail
I don't see the need for it on public roads.
I have not ridden on it yet since it was installed.
The reason for this is that once installed, OEMSeat is no longer available!
View detail
Expectations for Effectiveness
I didn't feel any inconvenience with OEM parts, but I decided to choose Other Brand Product because Tandem seat has poor parenthesis and Single cover is too expensive. I was expecting to be able to install and remove the OEM parts as described, but the size is too small and the installation is unexpectedly large. I wish it was a little easier to install and remove.
Also, the Seat width is wider, so the footing is obviously worse.
View detail
Expected to be effective
The OEM tank is too thin and has a sloping shoulder shape, so it didn't fit well when running in a circuit for about 2 years. The work is done. I've only just put it on the crotch, but it looks great. View detail
Increases the sense of Hold.
Compared to OEM, the tank shape is raised so that the body can be held without moving too far forward when breaking.
The use of a tank pad will further reduce slippage and increase the hold feeling. It is especially recommended for those who run Circuit with GunGun.
View detail
I am satisfied with Style.
It is a tightened Style.
It is also a perfect match with the Round Type Bar end mirror.
As a screen, it provides protection to the area under the chin at highway speeds and is in a good position to avoid echoes of turbulence hitting the Helmet and causing it to flop around. (By the way, the shoulders are windy, because they are Slim) The wind cutting sound is reduced and when you are tired of the wind cutting sound, you can take a break by getting down.
Since Unpainting. [Color] It needs to be clear or polished. I am using commercial Spray and SurLuster to polish it to a matte finish and see how it looks. The edges are sharp, so I'm thinking of applying rubber molds afterwards.
The installation was a bit of a puzzle since there are no pictures of the installation in the Instruction Manual, so I removed the OEM headlight cowl and placed it over the lower pointed part of the cowl. I was surprised that the lower part of the Screen did not fit when I first put it on.
Installation is done with the included BoltQuantity:It is 2pc and Bolt On just by co-tightening with Headlight cowl. There was no distortion.
View detail
Carefully made, beautiful
It is as if they are Japan's leading CowlManufacturer.
Everyone has their own taste in Design and I like this OEM chic. I also like that it is slightly extended!
Fitting may be a little bit necessary, it depends on the item, but I was able to install it without any modification. I was able to install it without modification. The holes are slightly long, so fine adjustment is possible.
View detail
CustomPoint and features selected for your needs.
I think the fit is very good. I am satisfied with the look of Carbon, which is different from Normal. I expect it will be comfortable since the height is slightly higher than the Seat position. I would recommend it to anyone who wants to install such custom parts. However, please understand that this is my personal value. View detail