Reviews
Fits: APRILIA RSV4 Factory, BMW HP 4, BMW M 1000 RR, BMW S 1000 R, BMW S 1000 R, BMW S 1000 R, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, DUCATI Multistrada V4 S, DUCATI Multistrada V4, HONDA CBR 1000 RR SP, HONDA CBR 1000 RR-R, HONDA CBR 1000 RR, HONDA CBR 1000 RR, HONDA CBR 1000 RR, HONDA CBR 1000 RR, HONDA CBR 1000 RR
Gilles High Quality
These Gilles paddock stand bobbins are a little larger than the previous version and use a clever system that holds the spool onto the screw in adapter using a retaining ring inside the spool (see picture). As with the older model the outer spool rotates freely from the adapter when installed. This helps reduce wear on the spool and makes lifting the bike easier. The spool itself is made of a special polymer/plastic that is much harder wearing than Aluminium. The instructions don’t provide a torque setting for the adapter and suggest using a spanner for installation. However there is a Hex fitment on the back of the adapter thread (see picture) that allows for the use of an Allen/Hex key for installation and removal. High quality made item. View detail
It's great.
The quality is good, Designma good. I hope it will not be active ^_^ View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
GILLES TOOLING GTA Front Wheel Slider
Damage reduction to the vehicle in the event of a fall and was installed as a talisman.
Above all, it looks good and Parenthesis is good.
View detail
Fits: INDIAN MOTORCYCLE FTR 1200 S, INDIAN MOTORCYCLE FTR 1200
Axle SliderRear for IndianFTR
Gil's Axle Sliderfor Rear
Just tighten it with a hexagonal bolt like Front.
for Rear comes with Sticker
View detail
Fits: INDIAN MOTORCYCLE FTR 1200 S, INDIAN MOTORCYCLE FTR 1200
Axle SliderFront for IndianFTR
Axle SliderFront by Gil's
Installation is simply tightened with a Hexagonal Wrench.
View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA MT-10, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
Gilles axle sliders YZF-R1
DOing a little bit of protection for the R1 recently and decided to go for the Gilles tooling axle sliders. I have used Gilles for protection before and have had really good results even after them getting some action. I found the correct part from Gilles tooling webisite and then searched Webike for the corresponding parts. Luckily, Webike do have quite a lot of R1 Gilles items in stock. Get in the basket. These were part of a larger order as this also saves me money on the amount of shipping. I use now EMS fast as they have never let me down. Even from Japan to the UK takes 4-5 days total. This time around, most of the parts were already in Wrbike warehouse so they all arrived in 5 days. I do love the way Webike package their orders. They take great care in packaging well and keeping everything separate and individually packed. if there is any space, they fill that with extra padding like bubble wrap and/or air pockets. This was the case on this order. Although the box these came in was relatively samll, they are kind of heavy for what they are. The last thing I wanted was for these to be moving around whilst in transit. Not with how Webike package items though, thumbs up for that one. The axle sliders arrived in perfect 100% condition as you would expect. ALl the manufacturing from Gilles is exceptional. They really do know how to make parts and make parts to the highest specifications and quality. They do not take much to fit them, simply a couple of bolts and away you go. If for any reason, these do see the tarmac, I know they are going to do their job as intended. Gilles, you are a superb brand and I am very pleased Webike stock your parts. Thank you Webike for the great service provided with this and all my other orders View detail
Fits: YAMAHA FZ-10, YAMAHA MT-10 SP, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA MT-10, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R6
Gilles Tooling rear axle sliders
Having already decided to purchase the front Gilles Tooling axle sliders, it was only right that I also purchase the rear axle sliders. I found the correct part from Gilles Tooling website. Then again, luckily, Webike also stock the rear axle sliders too. Brilliant. I could probably get these shipped direct from Gilles at around the same kind of price but then I woul have to hope they package their products accordingly. Ended up just getting averyhting from Webike. There were already the front axle sliders in my basket and a few other smaller bits and pieces. The shipping because of this was a lot better value than if I purchased just one or two products from Webike. I use nowadays, EMS fast. The service is spot on, everything is delivered in rapid time, when I say rapid, I mean from Japan to the UK in less than 5 days. All the parts in my order were neatly fitted into a smallish box which Webike took the liberty to seal on the outside. The inside was well packaged and these guys must be great at Tetris as they got eveything in the samll box without compromising the efficiency of the extra packing. They filled any gaps with bubble wrap and air pockets. When these arrived, you can just feel the quality. All the machining is perfect, no weird burrs or shards. The paint is flawless and you also get a couple of different coloured rings which should suit anyone's needs. Fitted really nicely and the overall result is a great looking bike with protection I know I can trust just in case. Very pleased with my purchases, thank you Webike View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R, KAWASAKI ZX-10R
Damper effect expected
Sliders with a single point of attachment are at risk of damaging the frame, but this product was selected because it has a built-in damper to dampen the impact.
It is hard to tell how effective it is because it has not been tipped over. It seems to be less stressful on the mounting area because it has little overhang for its thickness.
I like it because it is a shape that does not make much of a statement.
View detail