Reviews
Fits: SUZUKI ADDRESS110 [ADDRESS]., SUZUKI STREET MAGIC110 [Street Magic]., SUZUKI ADDRESS110 [ADDRESS]., SUZUKI STREET MAGIC110 [Street Magic].
CHAMELEON FACTORYReinforced Clutch Spring
Installed on the Normal clutch, the rotation of the Clutch is increased and the start is better.
The timings may become faster as time passes, perhaps due to heat dripping.
View detail
Fits: SUZUKI SEPIA [sepia]., SUZUKI STREETMAGIC [Street Magic] (LB), SUZUKI STREETMAGIC [ Street Magic ] (LA), SUZUKI SEPIA ZZ(CA1HC-172189-), SUZUKI SEPIA RS (CA1HB-111064-), SUZUKI LETS2 [LETS]., SUZUKI LETS [Lets]., SUZUKI STREETMAGIC [Street Magic] (LB), SUZUKI STREETMAGIC [ Street Magic ] (LA), SUZUKI SEPIA ZZ(CA1HC-172189-), SUZUKI SEPIA RS (CA1HB-111064-), SUZUKI LETS2 [LETS]., SUZUKI LETS [Lets].
I can't use it without it
Spring was the OEM for the Center Spring Slide Show Stem I can't use the first one, so I bought this one
As a result, the normal RPM range is higher, so you can run with Quickly
It's going to be a bit noisy, but …
View detail
Fits: HONDA LEAD100 [Lead]., HONDA LEAD100 [Lead].
Sauce
I was excited from the moment I received it to purchase it at Good Image, and I was excited about the installation process..
The first thing that hits me is that Spring is hard!
I feel the same way about Spring hooks as the OEMs, but it's probably not going to happen
Quantity of Spring on Shoe:Set and hanghang with the plahan and little by little carefully ... Yes, the installation is finished
It's a quick test drive
Clutch connects with good Timing, not bad, not bad
It's changed to a fun ride
Summer was in full swing at this time 。
And then fall came 。 Oh, doesn't that seem normal?
Yes, a little bit of Spring was Sauce
In this case, the OEMShoe was replaced with no lightweight machining and only the Spring
If you reduce the weight of the Shoe, Spring won't Sauce for a little longer, and
Even after Sauce, it's one TEMPO13 later than OEMSpring, and
This is not a bad idea
I still prefer this product with Sauce to the OEM's no-good start
I like it
The durability is good and it's the right parts to replace
View detail
Fits: YAMAHA Remote control JOG, YAMAHA Met-In ZR, YAMAHA Met Inn JOG, YAMAHA Grand AXIS, YAMAHA JOG90, YAMAHA AXIS 90, YAMAHA Remote control JOG, YAMAHA Met-In ZR, YAMAHA Met Inn JOG, YAMAHA Grand AXIS, YAMAHA JOG90, YAMAHA AXIS 90
Re-acceleration
It's much easier You can see that the Torque Camshaft is working properly without distortion When you put this on, because SenseP is hard even in OEM, Reinforcement Spring is not recommended
I don't know how durable it is, as I haven't been using it for a long time
View detail
Fits: YAMAHA Remote Control JOG, YAMAHA Met Inn JOG, YAMAHA Super JOG-ZR, YAMAHA Applio Type II, YAMAHA Remote Control JOG, YAMAHA Met Inn JOG, YAMAHA Super JOG-ZR, YAMAHA Applio Type II
Propeller
Impeller increases performance. Speeding up the speed in the early middle to make it better. More tip speed More driving fun View detail
Fits: YAMAHA JOG [JOG] 7ps, YAMAHA Super JOG [JOG]Z series, YAMAHA JOG [JOG] 7ps, YAMAHA Super JOG [JOG]Z series
Obviously hard
Previously, Reinforced Clutch Spring of externally made white color (10%Up) We were using.
With Pliers and this principle, I confirmed the strength of each other's Spring, clearly the product was hard.
So I thought that starting with Clutch meat at high revs, I thought that it would be better, and it was a wonderful acceleration that did not disappoint expectations when I installed it quickly.
And how much is the durability.
View detail
Fits: YAMAHA AXIS90 [AXIS] (Frame No. 060100-), YAMAHA AXIS90 [AXIS] (Frame No. 060100-)
Used for AXIS90. CHAMELEON FACTORY reinforced clasp KS006
I tried several Reinforced Clutch Springs, but Clutch meat is the slowest I feel.. Is it not too late but too soon. It's just a nice feeling because it's a city ride..
It might be too weak for vehicles that just put Exhaust Chamber in. It may be nice if the Clutch itself is light, but if Clutch is slightly lighter than NORMAL you probably want to late more Clutch meat.
Because making is solid, it seems durability is.
Installation is not different from other companies' Reinforced Spring and Large. If you are used to it you will be comfortable.
View detail
More smoother on acceleration,better performance in upon open throttler.Extra milleage saver on petrol,could feels e acceleration much better while on the move
More smoother on acceleration,better performance in upon open throttler.Extra milleage saver on petrol,could feels e acceleration much better while on the move View detail
Fits: YAMAHA Super JOG [Jog] series (Frame No.3YK-2660101-3YK-632000), YAMAHA APRIO [APRIO](4JP1-6), YAMAHA Super JOG [Jog] series (Frame No.3YK-2660101-3YK-632000), YAMAHA APRIO [APRIO](4JP1-6)
Since the thickness of the Center-spring SLIDER50 was about 6 mm, free length was short, and the number of turns also used few of this product.By our specification, it was a somewhat hard impression. I think that it is good for the vehicles which
Since the thickness of the Center-spring SLIDER50 was about 6 mm, free length was short, and the number of turns also used few of this product.By
our specification, it was a somewhat hard impression.
I think that it is good for the vehicles which the Tuning followed to a slight degree.Since there may be little heat Darre although it is
, it is continuing using as it is.
Satisfied.
View detail
Fits: YAMAHA Cygnus X, YAMAHA BWS125, YAMAHA MAJESTY125 [Majesty]., YAMAHA Cygnus X, YAMAHA BWS125, YAMAHA MAJESTY125 [Majesty].
Very good improvement over stock. The clutch engages much better at low speed and increased acceleration. The top speed was increased by 6km/h
Very good improvement over stock. The clutch engages much better at low speed and increased acceleration. The top speed was increased by 6km/h View detail
Fits: HONDA GIORNO CREA [GIORNO CREA]., HONDA Live DIO-ZX, HONDA Live DIO-SR, HONDA Super DIO [DIO] ZX, HONDA Super DIO [DIO] ZX SR, HONDA Live DIO-ZX, HONDA Live DIO-SR, HONDA Super DIO [DIO] ZX, HONDA Super DIO [DIO] ZX SR
Since it was outside the conformity vehicle type. It purchased with nothing to lose. Although hard one is hard, if the hang is known, it can insert in ordinarily. Rotation of beginning went up and they were satisfying goods.
Since it was outside the conformity vehicle type.
It purchased with nothing to lose.
Although hard one is hard, if the hang is known, it can insert in ordinarily.
Rotation of
beginning went up and they were satisfying goods.
It is the comparison by being pure.
Heat Darre also thought that it was few.
View detail
Fits: YAMAHA GRANDAXIS [Grand Axis]., YAMAHA GRANDAXIS [Grand Axis].
Although he uses in the combination of the power drive kit of a kitaco, 6.5 g x6, the kitaco strengthening clutch, the center spring of a chameleon factory, and the performance torque cam of a chameleon factory ... It is the highest!!! Although downse
Although he uses in the combination of the power drive kit of a kitaco, 6.5 g x6, the kitaco strengthening clutch, the center spring of a chameleon factory, and the performance torque cam of a chameleon factory ... It is the highest!!!
Although downses were not found yet, it became markedly quick when passing!!!
View detail
It is a lamp plate attached to the performance pulley kit for the addresses V125 of a chameleon factory. The pulley of an original manufacturer's product or other manufacturers is not suited. The slide piece is not attached. Since a thing like
It is a lamp plate attached to the performance pulley kit for the addresses V125 of a chameleon factory.
The pulley of an original manufacturer's product or other manufacturers is not suited.
The slide piece is not attached.
Since a thing like a black coating of the thing used now has come off in spots, it is purchase as repair parts.
It is well good kana that there are repair parts.
View detail
Fits: SUZUKI ADDRESSV100 [ADDRESS]., SUZUKI ADDRESSV100 [ADDRESS].
There is still no turn, and although not used, it is attached to the pure clutch of the address V125. The clutch spring has not come out of what manufacturer. a pure clutch -- it cannot use for the favorite one -- 笙ェ
There is still no turn, and although not used, it is attached to the pure clutch of the address V125.
The clutch spring has not come out of what manufacturer.
a pure clutch -- it cannot use for the favorite one -- 笙ェ
View detail
Fits: YAMAHA BWS [Bewith] 100, YAMAHA GRANDAXIS [Grand Axis]., YAMAHA BWS [Bewith] 100, YAMAHA GRANDAXIS [Grand Axis].
It is hard to slide and durability is also good. However, a shake down is becoming brave! Since the pulley and the torque cam are exchanged, it cannot generally say, but the belt made from 0 KI is broken in the middle of going home, it is pushed 7 kg
It is hard to slide and durability is also good.
However, a shake down is becoming brave! Since the pulley and the torque cam are exchanged, it cannot generally say, but the belt made from 0 KI is broken in the middle of going home, it is pushed 7 kg and has returned (T_T).
View detail
Fits: YAMAHA GRANDAXIS [Grand Axis]., YAMAHA GRANDAXIS [Grand Axis].
It attached to the grand axis. The engine and the strengthening balance of the part drive-line upgraded since bore up was carried out, the chamber was put in and the high speed pulley of the chameleon factory was also put in were considered and attach
It attached to the grand axis.
The engine and the strengthening balance of the part drive-line upgraded since bore up was carried out, the chamber was put in and the high speed pulley of the chameleon factory was also put in were considered and attached.
Because the help which moves a pulley to a smooth at the time of the re-acceleration from a slowdown is carried out, relation is also good good touch.
If it tampers with the drive-line with the sufficient balance, it can ride happily.
View detail
Fits: YAMAHA GRANDAXIS [Grand Axis]., YAMAHA GRANDAXIS [Grand Axis].
On a good point reinforcement target, I think that it is perfect. about a bad point, especially nothing clasp, there is a ratio pure -- it is likely to be. I would like to take out setting with various clasps.
On a good point reinforcement target, I think that it is perfect.
about a bad point, especially nothing clasp, there is a ratio pure -- it is likely to be.
I would like to take out setting with various clasps.
View detail
Fits: YAMAHA BWS [Bewith] 100, YAMAHA GRANDAXIS [Grand Axis]., YAMAHA BWS [Bewith] 100, YAMAHA GRANDAXIS [Grand Axis].
Although it has several kinds, an acknowledged chameleon factory is chosen. A size with good point width and exactly sufficient die length. Or [ that it is a chameleon factory too if it unites with the present specification ] -- a bad point -- esp
Although it has several kinds, an acknowledged chameleon factory is chosen.
A size with good point width and exactly sufficient die length.
Or [ that it is a chameleon factory too if it unites with the present specification ] -- a bad point -- especially, nothing
View detail
It is a down grade although attached to ZZ. In the state of it being too hard and becoming high rotation vainly since it attached to the sports muffler power filter and the external pulley, and the comparatively light tune car body. A feeling of P
It is a down grade although attached to ZZ.
In the state of it being too hard and becoming high rotation vainly since it attached to the sports muffler power filter and the external pulley, and the comparatively light tune car body.
A feeling of Power although the beginning is early to be sure, until it goes into a power band is lost by the clutch meat of 0 start becoming high rotation, and not quite satisfactory.
If it goes into a power band, it will become an appropriate run, but by town riding, it becomes difficult to ride clearly.
Since I think that it is suitable for the drive-line tune of the vehicles considerably upgraded with bore up or a chamber, it is a recommend there, but they are parts which cannot carry out a recommend to a normal light tune.
View detail