Reviews
It prevents wind and improves fuel efficiency, but it is noisy.
It is relatively large, so it works well as a windbreak. Coldness in the middle of winter is improved. Fuel consumption is improved by about 10%. The price is reasonable. Unfortunately, it is too noisy. The vibration of bumps, etc. "Vocon. And it makes a loud noise. In addition, if you drive at the legal speed of the original 2 in the headwind, it will be quite noisy (continuous bass sound) in Helmet. View detail
Perfect!
Ordered this Asahi windsheild No99 for my Kawasaki W650 and couldn't be more pleased. The exact look I was going for and a great price. Arrived super quick! View detail
Fits: Others 50cc-750cc for each company/Pipe handle
It looks nice.
As you can see in the product description of Manufactureretc.
It will definitely scratch the Handlebar.
This is a Recommendation for those who don't care about that.
Bracket is mainly iron.
If it gets rusty, it'll look good.
View detail
Just the right amount of size
Mounting Bracket is available in Quantity:Pair (for Left and Right) I am satisfied with the look and effect after installation to the extent that I take care to make it even etc.
Oh, I didn't like the fact that the CROSS CUB has mirror co-tightening, so I put the MONKEY125 on the CROSS CUB, but it works fine.
View detail
Fits: Others 50cc-750cc for each company/Pipe handle
Just perfect! great!
Just Perfect! However you guys have to know this is Mini.ver That means the size of the bracket can be different. I installed it on the Super Cub The problem is that the bracket is a handle type, so you have to purchase it separately. View detail
Fits: HONDA TACT, HONDA TACT, SUZUKI ADDRESS110, SUZUKI Address125
Vehicles equipped with DAYTONA's Screen are also acceptable.
Since I am installing a DAYTONA Screen, I am not using the Adapter that comes with this product, but using the Adapter that came with the Screen! 。 Therefore, I think that it has risen a few centimeters above the original installation position and the entrained wind has increased somewhat.
Even so, the effect of the Knuckle Visor is gratifying even if the wind entrainment is increased because the way to hit the wind is completely different when the hand is shifted to the outside while running. Especially since I use it for commuting. "Winter & Rain. I'm even more thankful for it because I use it in the worst situations.
However, if I say it is natural, it does not cover the hand like Hand warmer, so if I compare it with that, the effect of cold and windproof is inferior. This is good for me who is concerned about the appearance and hygiene!
View detail
Satisfied.
I am quite satisfied. The product is very sturdy. It's just that the mount is sharp and can scratch the handlebars. It's pretty good except for that part. The effect of blocking the wind due to the middle screen is quite good. However, the helmet creates a vortex, which causes a lot of wind noise. I am quite satisfied. The product is built to be very robust. Just because the mount is sharp, it may scratch the handlebar. Excluding that part is pretty good. The effect of blocking the wind is quite good due to the middle screen. However, due to the turbulence created by the helmet, the wind noise is severe. translated by Google Translator View detail
Small but effective
The design of the Large windshield is not as good as the Motorcycle's design, but this looks and feels less like a windshield. However, the windshield is very effective. View detail
Universal Product?
I bought and installed it for the winter months.
I thought it was possible to install it with Bolt On because it is a C125 exclusive product, but I had a hard time fitting it. But it was very hard to fit.
It is not a good wind protection, but it is also not a good windbreak, and the wind that comes with it is the Quantity:Pair (for Left and Right) It comes in from the side and the wind hits your body. It's still summer, so it's not a problem, but if it were winter, I think it would be.
But there were some good points. The rain doesn't hit you directly on your body.
Before the C125 was installed, the front of the front was wobbly before it was light, but after the installation, the wobbliness is reduced and the Handling seems to be stable.
Unfortunately, the windshield was not as effective as it was sold to be.
There were some good points, so I think it was okay.
View detail
It was better than I thought it would be.
Since it's a meter visor, I thought it would only be a dress-up, but when I put it on, it didn't have a dramatic rectification effect, of course, but I could still feel the change in airflow compared to when I didn't have it on. It would have been better if it had been longer, but I'm glad I bought it as a dress-up, for its effect and for its texture. View detail
Not bad.
It's easy to install as it's a special product. (Old model Jikusa
Because it is a meter visor, there is no wind protection effect, but I feel that it is better to have it than not to have it.
However, I think Parenthesis will become much better if this is added as a dress-up.
View detail
Excellent wind protection
I bought it for the New Year's Eve Soya Cape for wind and cold protection.
All Screens may be the same, but they are a bit cumbersome to install.
It is installed on the underside of the headlight with the Mirror and the friend tightening.
All you need is a Phillips Screwdriver and a Hexagonal Wrench and you're good to go.
It is quite effective as a wind and cold protection.
You don't have to lie down to let the wind pass over the Helmet.
So I think it's close to windless.
The crosswind was so strong in Hokkaido that I couldn't tell if there was no wind or not (laughs).
The cold wind didn't hit my body, so it worked quite well to keep me warm.
If I were to raise Demerit, I would say two things:looks and air resistance.
As for the appearance, the impression of the Small and cute LITTLE CUB is completely changed because the head looks Large.
As for the air resistance, I felt that the Engine was working a little harder than when I didn't have the Screen because of the Large Screen.
And there's Demerit, but the heady LITTLE CUB is cute too, and I never felt like I couldn't move forward at all due to air resistance.
To begin with, I couldn't get that much speed in Hokkaido in winter (laughs).
It was an excellent screen for wind and cold protection.
View detail
It's pricey.
The good thing is that it can be installed at the same time as the pcx Body Mount Shield.
The Right Side doesn't interfere with the shields, but the Left Side hits when fully locked, so
It is Minus in that respect.
I wish the bottom side was a little larger, but it is OK because I can avoid the wind and rain.
View detail
Fits: YAMAHA APRIO, YAMAHA Remote controller jog, YAMAHA JOG POCHE, YAMAHA JOG Z, YAMAHA JOG Z, YAMAHA JOG Z, YAMAHA JOG, YAMAHA JOG, YAMAHA Axis, YAMAHA Axis, YAMAHA Axis, YAMAHA Axis, YAMAHA JOG Deluxe, YAMAHA JOG
Small rainfall is hardly wet
important item
[Was there anything that disappointed you?
There was nothing in particular
Do you have any wishes or improvements you would like to make for the Manufacturer?
Since Axis itself was discontinued more than 20 years ago, the product has not sold well now I know there won't be any, but I'd like to have them because they won't be discontinued somehow I'd like to see Repair Parts continue to be sold at least
[Do you have any products to compare it to?
A CHINA-like fake that is sold on Amazon or something like that
Frequently Asked Items
What made you decide to buy?
We have chosen to use domestic products here for peace of mind
How was your experience with it?
It's almost impossible to get wet if it's only raining, and I'm running with the Helmet's Shield fully open Because visibility is good, it is comfortable in all seasons However, because the Screen is Large, air resistance also becomes Large, the maximum speed is lowered I do That said, though, aerodynamic drag isn't a problem for city driving
Was the installation difficult?
It's not technically difficult, but there are many adjustments to be made, so the overall balance is well balanced It will take some time to take and install
【Please tell me the installation point and hang】
If you put the bracket at a slight angle, the entire screen will be distorted Bracket and other parts need to be adjusted:Pair (for Left and Right) Screen will be distorted if you don't synchronize the angle of the Handlebar Switch of
[Included Parts:were they on?
Adapter & Bracket are included in the package 8mm Opposite Thread Screw for the Yamaha OEMMirror I am
[Others]
If you are using the OEM Mirror, there is nothing wrong with that, but if you are using the Other Brand When using the Product's Mirror, if the screw of the Mirror is 10mm or If you have a Normal Thread Screw, you will need a separate conversion adapter You'll need to purchase and change the Mirror mounting hole diameter on the Bracket from 8mm to 10mm it needs to be expanded to 2.5mm
View detail
Fits: HONDA BENLY50 PRO, HONDA BENLY50110PRO, HONDA BENLY50, HONDA BENLY50, HONDA BENLY50110, HONDA BENLY50 PRO
The storm effect is more than I expected
The height of this product provides considerable wind protection
I don't know what exactly it is because I'm wearing a Full face, but it's probably up to about forehead level Cover
Because of my short stature, the top edge of the screen is a little bit below eye level, which is an eyesore, but I can get used to it I feel fine
It is only used in conjunction with Knuckle Visor
As a corollary
The Screen is blurred and the field of vision through the Screen is uncomfortable, and it is difficult to see the footing on uneven ground It can be a scary thought
View detail
Dramatic improvement in wind resistance
I purchased this product to reduce the running wind on my Jixxer
The delivery time was guided to take about a month from the time of order, but it actually took about two weeks from the time of order
Installation is very simple and easy Car Both Sides ScrewQuantity:2pc removal,?ScrewQuantity:Tighten 2pc, install Screen Bracket, tighten 4 screws, Screen It took me about 15 minutes to complete the job with a 3 footpeg of installation of
The following three points are important for installation
Need #2 Phillips Screwdriver
Overtightening the Screw on the Windshield interferes with the Bracket
When removing the screw on the body side of the car (7,000km), the screw side has no rigidity and the screw is not rigid enough You must carefully remove it with a high-precision tool
With the Visor installed, the height is increased by about 9cm compared to the OEM, and the wind resistance is even better than it looks It was done There is no collapse of design as it is a dedicated product, but rather, it is a product that has become better in Parenthesis It seems It also increased the Handlebar stability at high speeds The height as well as the width of the car may have had a rectification effect
The price seems a bit high, but it is a good quality product with Polycarbonate It's worth the purchase because it's Exclusive Design and it's expected to be effective
It is important to note that the screen changes when storing a vehicle in a sunny location You will need to cover it with the cloth bag that came with it to avoid the possibility of (If you can keep out the sun, buy some at Toweletc.)
In general, it was a good product and I can highly recommend it to anyone who drives fast with a Jixxer Owner!
View detail
Price is high, but performance is expected
I commute to work on the PassPass every day with my Jixxer for about 60km round trip When it is a windy day and there is a headwind, the Grip force of the Front is reduced to the extent that the Front fork is extended So, I decided to buy it to improve it It's not ready for use yet, but it's an Exclusive Design in Polycarbonate It's not ready for use yet, but it's an exclusive design in Polycarbonate Installation is only possible with the #3 Phillips Screwdriver, so the We are looking forward to the performance and serviceability It's a bit Neck that it takes more than a week to deliver because it's a made-to-order product View detail
Fits: Others 50cc-750cc for each company/Pipe handle
I wish I'd put it on sooner
In the case of my motorcycle, the OEM Option product looks good, but the thing is It is small and does not have the high wind protection required for long distance winter touring
I tried the Screen from another company, but the Large single-cylinder Motorcycle had no vibration Large Kiku, I was running around worrying about scratching the body of the car
So, if this ScreenBody is light, it might not vibrate so much I bought it
Installation is easy
If you don't want to scratch the Handlebar with the Mount's parts, you can put a thin rubber between them You might want to do some Wound prevention
You can Firmly install it if you don't pinch anything, though
It's a pretty large device, so if it's high speed, a lot of wind pressure will be applied to the screen, so make sure it's secure!
So, when I ran it, I felt … the driving wind was virtually non-existent from my waist to my face
Of course, the wind will come in, but if you wear your Wears well, you won't feel the cold wind at all
Normally the buttons around the neck of the jacket are fastened tightly, but the other day, even though I opened two of them, they were still on my chest The wind did not come in to
The Screen's vibrations are solid in the Bracket, and thanks to the lightness of the Body, the Screen's vibrations are rapid acceleration It's acceptable to shake a little bit unless you're
I'm glad I put it on because the effect is extremely large, even though it looks tacky to me
That wildness is a good thing with Classic Bike
View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA400, KAWASAKI NINJA250R
Wind protection is a nice touch
Installation is easy
It was just a bit thinner than the OEM Screen, or it rattled
I used a 1mm rubber sheet to adjust it
I think it's just a little longer than the OEM, but it's more windproof
[Color] Smoke was darker than I expected I guess that's okay because it looked different
View detail
Small and well-designed
I bought it because I like the design in my opinion!
I also considered the OEM, but I liked this one better (this part is my personal feeling, so I have my objections) (If you are a person, please go through it)
Also, it was made by Asahi Windshield, a company with a long history in windshield design
Installation is easy with a 10mm glasses wrench and a 3mm loofahgon wrench is
(In my case, I had to relocate Antennas for ETC and it took some work
As for the wind protection performance, up to 70~80km/h, the wind at the chest seems to be weak However
With Helmet with Visor, the wind hit the ground more strongly, and the Helmet's Wind Cutting sound is Large
It seems to have become
I'm just guessing, since we haven't driven on the highway yet, but I'm guessing that the air will be flushed further upward at high speeds, so we'll be able to get a better idea of what to expect
I expect it to be comfortable That's what I'm hoping for at the moment
Sorry to be halfway through this report, but both Size and Design are well suited to XSR I think it looks good on you
If you're looking for something easy and stylish, I thought I'd recommend it
View detail