Reviews
Satisfied, except for the price.
The quality is good and satisfactory. If only the price could be kept a little lower. View detail
The goal is to improve appearance
Bolt on Master CylinderClamp replaced with Titaniumium Bolt to improve appearance.
It may be slightly lighter, but you can't feel it.
Titanium's brilliance allows you to indulge in self-satisfaction.
View detail
For CaliperMount
The Bolt that came with Caliper support was
Replaced with a regular cap bolt because of the way it looks.
They wanted to look good with Titanium anyway.
Maybe it would have been better if it wasn't perforated.
View detail
pretty good bolts
For a friends bike they wanted some titanium tapered bolts to replace the stainless ones. Tese came out as being really good value so ordered. A little on the sharp side but overall, not too bad at all. They are happy with them and where they are, as long as the top looks good, it's all good View detail
For Dress-up
It is good to change the atmosphere by simply replacing Bolt.
Since it is aluminum, we used it in areas that are not under load.
It was unfortunate that there was an extra Bolt that was not long enough.
View detail
Titaniumium Bolt on the appearance Accent
[How is it used?
Used for brembo RCSMASTER lever.
Was the one you received as per Image?
Street Image
Was the installation difficult?
Hexagonal, just tighten with Wrench
How was your experience with it?
Lighter than steel
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
colored plastic fasteners
Bolts look great and feel like theyre quality made. The threads seem to be very close to oem I havent had a problem replacing any bolt around the plastics and seat. Love the size and comes in hand in the tool box at the track. A little pricey in my opinion at for a 13 crf450r.The packaging is very careful. It came with a big box. I think it is unnecessary. I received it in 12 days. Thank you View detail
AGUSTA
I don't see many low-head Titaniumium Bolts, so this would be helpful. It would be great to have an anodized VERSION as well. View detail
Extra low head bolt
The Button bolt that holds the Heel Guard on the Babyface Rear Sets was slightly tarnished, so we replaced it with this Extra Low Head bolt.
When placed side by side with the button bolt included with the Rear Sets, it is a very low head, and when installed, the protrusion can be made as small as possible, and I think it has a high quality look and feel.
However, since the inner diameter is 3mm hexagonal to make an extra low head, it cannot be used in areas that need to be tightened with a high torque.
The Torque for the part in question was 10N/m, so I thought it would be impossible, but I wanted to give it a try and gradually tightened it with the Torque wrench;
I was still a bit of a fool (of course, I didn't reach the Torque).
Perhaps with this size, it would be better to keep the hexagonal L-TypeLongWrench handle only to the point of lightly flexing.
I would like to replace the Bolt that was nudged this time, even if it does not reach the free shipping Line slightly on my next purchase.
View detail
Replacement M6Cap for Bolt with Rear Sets by Babyface
The Babyface Rear Sets for the 2021 MT-09SP have the rear master cylinder offset and the master cylinder is pushed via the M6 Bolt attached to the brake pedal. The bolt that attaches the Master Cylinder was damaged in the past, so we replaced it with a Titaniumium Bolt made by ZETA, which was well made for a reasonable price. I found this ZT07-0645 (M6 P=1.0/L=45), which I thought could be used to replace the M6 Cap Bolt that pushes the Master Cylinder.
Simultaneously paired TitaniumFlange Lock NutZT21-1061 (M6 P=1.0) I also installed a "Tightly" and it tightens firmly and I feel like it is tightly, but not really.
Design-wise, it would have been best to have this Size in Taper shape, but I am satisfied with this inexpensive purchase with no functional problems.
View detail
Titaniumium Bolt you can trust
Item number:ZT01-0840
This is the famous Titaniumium Bolt from ZETA.
The CutDown has the claim that it is a cost-conscious product, but in terms of price, the Cap bolt of the same size is cheaper, so if you are simply looking for cost performance, the Cap bolt is better.
this product (CutDown) The difference between the largest Flange bolt and the smallest Flange bolt is the Flange diameter.
The flange diameter is 17mm, which is a large size setting for the M8 Bolt.
In this case, I replaced the bottom bracket bolt on the GSX1300R Hayabusa, but since the OEM bolt had a flange diameter of just under 17mm, I chose this one to match the seat diameter.
Incidentally, the design is certainly modest in terms of design features, such as the omission of the concave processing of the head, but it is not low in quality.
The hexagonal head bolt will inevitably have tool marks on it, so I think the cap bolt is a better choice for appearance.
View detail
Good accuracy, low head Bolt replacement.
I want to make the fixed Bolt of footpeg into Titanium of baked color. (Because Parenthesis is good) I've been looking for a low head Titaniumium Bolt, but haven't been able to find one...
I ended up buying this Titaniumium Bolt and burning it myself! Of course, you`re on your own!
Although the finish is uneven, I am satisfied with it considering that I did it by myself. Of course, it's definitely Titanium.
As for the color of the bare metal, it may certainly be different from what you imagine when you hear the word "Titanium". However, the finish of the surface, the processing part, the corner part, etc. is smooth and feels quite high quality. Although it is pricey, it is a Bolt that is pleasant to look at and touch. (This is my personal opinion)
I was surprised that there is no low-head Titaniumium Bolt, but I am grateful for the lineup.
View detail
Trustworthy Titaniumium Bolt
This is a Titaniumium Bolt from a trustworthy Manufacturer.
The product description also includes appeals such as hot forging, rolling, etc. The material is also clearly stated and tensile strength, etc. Specifications are also compared.
Generally speaking, the motivation for wanting to replace the Titaniumium Bolt is
It's kind of cool.
It won't rust.
I think it's right around the corner.
However, it's obvious by looking at the price that it's a bit overpriced for a Bolt.
How much Gold can you pay for Titanium that everyone loves Large?
And to begin with, you should know that there is nothing better than OEMBolt for the function of “ conclusion ”.
From a simple bolt, the manufacturer determines the spec. to cover the necessary functions such as strength classification and surface treatment, and sets the tightening torque to match the bolt.
You can find many Risks to replace such OEMBolt with Titaniumium Bolt if you look it up, so check it out beforehand.
You should be particularly concerned about...
Since it is easy to bite, I will care by Thread compound etc.
Even if ↑ is assumed, the part where heat is applied (Exhaust pipe installation, etc.) It is better to avoid
It is better to avoid the part which is severe in the strength such as a high-load part.
I guess that's just the way it is.
The Titaniumium Bolt itself can be found at Amaz*n, but I think it's better for your mental health to use this kind of manufacturer's product when you are worried about the part.
Of course, a reasonable peace of mind fee is required.
ZETA's Titanium Bolt has a wide range of sizes for each head shape, so it is recommended for those who want to have a uniform feeling.
However, if you ask me if it has enough beauty to be called a “cosmetic Bolt”, I think that is a matter of sensitivity.
By the way, I personally think the texture is high enough.
Also, ZETA's Flange bolt is slightly more expensive than the same Cap bolt. (About 30% more)
If you're not picky, Cap bolt is more Wallet friendly.
In general, the balance between reliability and cost is reasonably good for Titaniumium Bolt, so I think the focus of consideration is on the pros and cons of “Titaniumium Bolt” rather than the pros and cons of this product.
View detail
Trustworthy Titaniumium Bolt
This is a Titaniumium Bolt from a trustworthy Manufacturer.
The product description also includes appeals such as hot forging, rolling, etc. The material is also clearly stated and tensile strength, etc. Specifications are also compared.
Generally speaking, the motivation for wanting to replace the Titaniumium Bolt is
It's kind of cool.
It won't rust.
I think it's right around the corner.
However, it's obvious by looking at the price that it's a bit overpriced for a Bolt.
How much Gold can you pay for Titanium that everyone loves Large?
And to begin with, you should know that there is nothing better than OEMBolt for the function of “ conclusion ”.
From a simple bolt, the manufacturer determines the spec. to cover the necessary functions such as strength classification and surface treatment, and sets the tightening torque to match the bolt.
You can find many Risks to replace such OEMBolt with Titaniumium Bolt if you look it up, so check it out beforehand.
You should be particularly concerned about...
Since it is easy to bite, I will care by Thread compound etc.
Even if ↑ is assumed, the part where heat is applied (Exhaust pipe installation, etc.) It is better to avoid
It is better to avoid the part which is severe in the strength such as a high-load part.
I guess that's just the way it is.
Titaniumium Bolt itself can get cheap Chinese products at Amaz*n, but I think that it is good to use this kind of manufacturer's product for the part that becomes a little worried.
Of course, a reasonable peace of mind fee is required.
ZETA's Titanium Bolt has a wide range of sizes for each head shape, so it is recommended for those who want to have a uniform feeling.
However, if you ask me if it has enough beauty to be called a “cosmetic Bolt”, I think that is a matter of sensitivity.
By the way, I personally think the texture is high enough.
In general, the balance between reliability and cost is reasonably good for Titaniumium Bolt, so I think the focus of consideration is on the pros and cons of “Titaniumium Bolt” rather than the pros and cons of this product.
View detail
Accent with a good feeling
I bought this for a dress-up.
The delivery time for this product was less than three months, so I had to wait a long time, but it arrived earlier than expected.
The installation was also very easy to understand with the Instruction Manual.
However, I felt that the price was a bit high for Bolt.
It shines good after installation.
View detail
Large satisfied with the texture
I bought it because I had some areas I wanted to change to Titaniumium Bolt.
Large satisfied with the texture.
It can also be used for dress-up, weight reduction and increased rigidity.
It would be fun to gradually add more Titaniumium Bolts to the mix.
View detail
Large satisfied with the texture
I bought it because I had some areas I wanted to change to Titaniumium Bolt.
Large satisfied with the texture.
It can also be used for dress-up, weight reduction and increased rigidity.
It would be fun to gradually add more Titaniumium Bolts to the mix.
View detail
Very light
I bought it to wiring the Caliper bolt
I used it for PCX, but it is a little bit long when it is 25mm, because it interferes with the Rotor, so I put a collar on it I installed it, maybe 20mm would have been better
View detail
Perfect for Wiring
I bought it to wiring the Caliper bolt It is very light, and the hole for wiring is clean and easy to pass the wire through It may be Titanium, but it is good when it is a little cheaper View detail
Used for Brembo's Brake master Handlebar Clamp.
【What made you decide the purchase?】
Because I thought that it could be used for Handlebar Clamp of Brembo master cylinder.
【How was it actually used?】
It was perfect size for brembo Master Cylinder Handlebar Clamp!
【Please tell me the installation point and hang】
Bolt for brembo 's Handlebar Clamp was 25 ?, but in order to wear a Bracket for Reserver tank in the Handlebar Clamp part, I installed a length of 35?
[Is there anything I was disappointed about?]
That there was only one color.
【Hope for Manufacturer ? Please let me know if there are any improvement points]
I think that it is difficult with Titanium, but I think that you can choose other colors.
【Have you compared items?】
None
View detail