Reviews
Large satisfaction, I should have changed it earlier.
I have tried various levers from brembo OEM, but this one fits me the best, including one for Clutch SideRCS.
When I inquired about the compatibility with my favorite XR0.11.71, I was told that it was not made by brembo, so I could not get an answer. I checked the description of ASite and found that RMCMASTER is available! I immediately bought it because the delivery date was earlier than this one.
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 1199 PANIGALE, DUCATI 1199 PANIGALE R, DUCATI 1199 PANIGALE S, DUCATI 1199 PANIGALE TRICOLORE, DUCATI 1299 PANIGALE, DUCATI 1299 PANIGALE S, DUCATI 749, DUCATI 749EVO, DUCATI 749EVO CORSE SE, DUCATI 749R, DUCATI 749S, DUCATI 848, DUCATI 848EVO, DUCATI 848EVO CORSE SE, DUCATI 848R, DUCATI 848S, DUCATI 899 PANIGALE, DUCATI 959 PANIGALE CORSE
Adjustment range
It is great because the adjustment range is very fine. The other day, when I fell down on Circuit, the force was applied to the front side, and the Crack appeared at the root, not the lever. It is good for standing fall, but it may be weak for Circuit fall. I repurchased it again because of its good cost performance. View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
The pictures are confusing.
I bought this for use on a 2023 SV650.
It's my fault for not checking carefully, but I saw two Levers in the sample product photo, so I decided to order a Quantity:Pair (for Left and Right) Quantity:I bought it thinking it was Pair.
When it arrives, it is only Brake lever.
I had no choice but to purchase an additional Clutch, but since it was not sold for the SV 650, I had no choice but to return it.
The product itself had a good texture, but the sample photos were confusing.
View detail
Fits: KAWASAKI ZX-10R, HONDA HAWK11, KAWASAKI Z1000, KAWASAKI Z1000R EDITION, KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI NINJA1000, HONDA CB1000R, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR SP, HONDA CBR1000RR SP2, HONDA CBR1000RR-R, HONDA CBR1000RR, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS 14
2BL-PC40 Brake lever replacement
Brake lever replaced.
ZETA Pilot Lever Brake Item No. F5575
Fingertip feeRing is better than OEM Product.
I recommend it!
View detail
Fits: KAWASAKI ZX-10R, HONDA HAWK11, KAWASAKI Z1000, KAWASAKI Z1000R EDITION, KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI NINJA1000, HONDA CB1000R, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR SP, HONDA CBR1000RR SP2, HONDA CBR1000RR-R, HONDA CBR1000RR, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS 14
2BL-PC40 Brake lever replacement
Brake lever replaced.
ZETA Pilot Lever Brake Item No. F5575
Shorter than OEM Product and better fingertip fee-ring.
I recommend it!
View detail
Fits 23-year 400X
I've been trying to find out and inquire if it will fit a 23 nc56 400X.
I could not confirm it, but I was able to install it.
It seems that the brake master is different from the previous generation SingleDisc brake models.
Installation was easy.
View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
Easy to use
Easy to grip and use
It looks cool and perfect!
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
Satisfied with high quality and functionality
I installed it on my CT125.
The OEM felt the need to replace it with Other Brand Product since the grip is not adjustable, and selected 3Finger from the stable ZETA.
Since I had already used it on another Motorcycle and was satisfied with the comfort of using it, I did not consider choosing from another Manufacturer.
The grip and feel of the controls are now much better, and I realized once again that you have to choose good quality parts for parts that are always in contact with each other.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
BrakeTouch is also improved
I have used it on my KLX230R and it does not break the lever even after repeated falls, and the touch of the brake lever is improved over the NORMAL, so I installed it on my CRF250L as soon as possible.
With the NORMALLever, when I apply the brake, it feels unreliable or squishy (which is natural since it is an off-road vehicle), but with this lever, I feel that the ease of levering and the construction of the lever improves the touch and makes it easier to control the brake. I think it may be because the lever is positioned closer to the car.
Installation is easy since all you have to do is remove the Bolt and replace it with a NORMALLever, but it would be easier to work with if you loosen the Mirror Holder and change its orientation.
When replacing them, it is better to grease them up properly before replacing them.
View detail
Fits: KAWASAKI ZX-10R, HONDA HAWK11, KAWASAKI Z1000, KAWASAKI Z1000R EDITION, KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI NINJA1000, HONDA CB1000R, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR SP, HONDA CBR1000RR SP2, HONDA CBR1000RR-R, HONDA CBR1000RR, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS 14
high quality
[How is it used?
I got a VTR1000SP2 from an acquaintance that had been neglected for a long time, and the lever was not OEM, but a cheap type of machined type that looked a little weird when you held it.
I don't like it, it's on Short and I don't like the way it feels against my finger. If I liked it that way, the OEM lever would be that way, and motoGP has that on theirs. So I thought about going back to OEM, but since I usually play off-road, I chose ZETA.
I chose it because it is not a so-called dress-up shape.
We chose this product because our VTR1000SP2 has FrontSection replaced with SC59 CBR1000RR.
Was the one you received as per Image?
The quality of ZETA's sharpening has improved over the years. In the past, the anodized surface would fly off and peel in seconds, but now it is Large and durable.
How was your experience with it?
It is easy to grip and the adjustment mechanism is fine-tuned.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
If you are a gutsy person who wants to use Remote adjuster, you can buy Flight lever on a top ranking.
View detail
Replaced from 3Finger.
I used to have a 3Finger, but now that I know that only the lever part can be replaced, I decided to go with a 4Finger.
I think in most cases SEROW and others are to be 3Finger, but Merit is also available for 4Finger.
The power of the Lever allows the Brake to work with less force.
When I was using 3Finger, I used my index and middle fingers for Main.
With 4Finger, the index finger is mainly used for Axel, and the middle and ring fingers are mainly used for Brake.
The Accelerator operation can now be performed with finesse.
When delicate operations are required for Brake, the index finger can be used for Brake as in the past.
I feel only Merit now without much Demerit.
3Finger is said to be more resistant to breakage and finger jamming.
And I always have a replacement Lever in case of emergency.
The position of the lever is made to be as far away from the handlebar as possible to prevent it from being pinched.
I was impressed when I switched from NORMAL to ZETA's 3Finger.
When strong braking force is required on the on-road, or when starting up from a small turn on the on-road.
If a subtle Accelerator operation is required, 4Finger feels that Merit is Larger.
Above all, I am glad that I can exchange only the tip of Lever.
View detail
Fits: HUSQVARNA FC250, HUSQVARNA FE250, GASGAS MC250, HUSQVARNA FX450, GASGAS MC125, KTM 250XC-F, KTM 300XC TPI, KTM 250XC-W TPI, KTM 250XC-W, KTM 200XC-W, KTM 150XC-W/TPI, KTM 350XC-F, KTM 125XC-W, KTM 250XCF-W, KTM 300XC-W, KTM 300XC-W TPI, HUSQVARNA TC250, HUSQVARNA TC125, KTM 500XCF-W, KTM 350XCF-W
Improved Brake grip comfort
I installed it on my gasgas EC250 which I always use for forest road touring.
The OEM Brake lever did not give me a good supplemental grip, so I bought this lever to try it out.
Fit feeling of the fingers is good, and the feel when operating the Lever is very much improved.
Furthermore, the fact that the lever is foldable makes it difficult to break, which is good, and reduces the number of troubles during touring on forest roads.
The quality is good and I like the Large change.
The only drawback is that the price is very high.
View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
Good product but shorter than I expected.
I like both the detailing and the look of the product.
But is 4Finger better for me?
It is about 2 or 5 Finger long when I hold it.
View detail
Unbreakable, easy to operate
The Pivot lever moves in the opposite direction of the grip, making it difficult to break in the event of a fall. The 3Finger has a shorter lever length than the 4FingerType, so it has less risk. I choose 3Finger because I operate the Brake with my index and middle fingers, so the shorter lever is not a problem for me. If you are going to drive on unpaved roads, this is the first part you should put on. View detail
Fits: KAWASAKI KLX250, KAWASAKI KLX230SM, KAWASAKI VERSYS-X300, KAWASAKI VERSYS-X250, KAWASAKI KDX125SR, KAWASAKI D-TRACKER X, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230R, KAWASAKI KLX230R S, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI KLX150BF, KAWASAKI D-TRACKER125, KAWASAKI KLX125, YAMAHA XTZ125, YAMAHA WR155R, HONDA TRAIL125, HONDA CRF150L, HONDA CRF250M
The build quality is good!!
After all, it's a Zeta.
This is highly satisfactory tuning at a relatively low price.
Replacement work takes just 5 minutes. There was interference between the existing Jetta knuckle guard and the original brake lever, but after replacing it with this product, the problem was resolved, and the three-finger grip is very comfortable.
It is luxurious because it is made of aluminum CNC. For those of you who are hesitating, do it!! -------------------------------------------------- -------- It's Jetan. Tuning is highly satisfied at a relatively low price. 5 minutes of replacement is enough. Existing Zeta Knuckle Guard and genuine brake lever were interfered with, and after replacing this product, the problem was lost and the threading grip was so comfortable. Aluminum CNC is luxurious. Those who are hesitant!! Powered by Google Translator
View detail
Fits: KAWASAKI ZX-10R, HONDA HAWK11, KAWASAKI Z1000, KAWASAKI Z1000R EDITION, KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI NINJA1000, HONDA CB1000R, HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR SP, HONDA CBR1000RR SP2, HONDA CBR1000RR-R, HONDA CBR1000RR, KAWASAKI ZX-6R, KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI 1400GTR CONCOURS 14
I'm satisfied
I had a ZETA Lever installed offline and was happy with how it felt, so I decided to try it on. Installation is easy. View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
Grip width to your liking.
NORMALLever, my fingers felt far away, so I exchanged them to place them a little closer together.
I think it is a good idea to replace the NORMAL Brake master if you continue to use it. I put the unused NORMAL lever under the Seat and used it as a spare lever.
The color is a luxurious Black, which gives it a higher quality feel and Large satisfaction.
View detail
Fits: YAMAHA YZ450FX, YAMAHA YZ250FX, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125X, YAMAHA YZ450F, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA YZ125, KAWASAKI KX450F, KAWASAKI KX250, KAWASAKI KX250F, YAMAHA WR450F, YAMAHA WR250F
I don't have a Brake lever.
Like Clutch lever, I have been using it for a long time.
The Clutch Side has a different feel to it, though the difference in angle makes the fingers feel fatigued and the grip feel less appealPoint.
The distance between the moving parts may be a slight difference, but the initial operation feels relatively light, and I feel that light brake before cornering can be done smoothly.
As you can see from the comparison image, when the position of the balls at the working point is aligned, the standard position comes to the position where the adjustment screw is tightened about 2 rounds on the OEM side.
Like Clutch, this is also a good point, since installation can be handled by replacing only the Lever.
Cover can also be installed.
View detail
Fits: TRIUMPH DAYTONA 675, TRIUMPH DAYTONA 675 SE, TRIUMPH SPEED TRIPLE, TRIUMPH STREET TRIPLE675R, Others NISSINRadial Casting Type, SUZUKI GSX-S1000, SUZUKI HAYABUSA, SUZUKI B-KING, BMW S1000RR, BMW S1000R, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000 R, SUZUKI GSX-S1000 F, SUZUKI KATANA
ZETA
Installation is easy
I used it off-road and found it easy to operate, so I decided to use it on-road as well.
View detail
Fits: TRIUMPH DAYTONA 675, TRIUMPH DAYTONA 675 SE, TRIUMPH SPEED TRIPLE, TRIUMPH STREET TRIPLE675R, Others NISSINRadial Casting Type, SUZUKI GSX-S1000, SUZUKI HAYABUSA, SUZUKI B-KING, BMW S1000RR, BMW S1000R, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000 R, SUZUKI GSX-S1000 F, SUZUKI KATANA
Nisshin5/8Inch Radial brake used as lever for master
Nisshin5/8Inch Radial brake master lever.
The standard lever is a short type and its bend position is closer to the pivot, so it interferes with the switch box.
The curve of the lever is very comfortable to hold in the hand, and the position of the bend is closer to the tip, as I had hoped, so the interference with the Switch box has been considerably alleviated.
In the event of a fall, only the lever tip can be replaced, and the structure is designed to release the force without breaking, providing a good sense of security that allows the user to continue driving.
View detail