Reviews
Fits: HUSQVARNA FC250, HUSQVARNA FE250, GASGAS MC250, HUSQVARNA FX450, GASGAS MC125, KTM 250XC-F, KTM 300XC TPI, KTM 250XC-W TPI, KTM 250XC-W, KTM 200XC-W, KTM 150XC-W/TPI, KTM 350XC-F, KTM 125XC-W, KTM 250XCF-W, KTM 300XC-W, KTM 300XC-W TPI, HUSQVARNA TC250, HUSQVARNA TC125, KTM 500XCF-W, KTM 350XCF-W
Improved Brake grip comfort
I installed it on my gasgas EC250 which I always use for forest road touring.
The OEM Brake lever did not give me a good supplemental grip, so I bought this lever to try it out.
Fit feeling of the fingers is good, and the feel when operating the Lever is very much improved.
Furthermore, the fact that the lever is foldable makes it difficult to break, which is good, and reduces the number of troubles during touring on forest roads.
The quality is good and I like the Large change.
The only drawback is that the price is very high.
View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
Peace of mind in the event of a fall
The product introduction screen shows that the lever is designed to release the load in a vertical or forward direction relative to the handlebar, so it can be used as a lever for the handlebar.
Even if it falls over, it is unlikely to interfere with Lever operation, providing peace of mind.
I think it is good that the lever's grip width can be adjusted so finely.
I was concerned that when I tried to move Lever in the vertical direction against the handlebar by loosening the inner bolt at the lever's movable point, assuming that it would fall over, it could not move as shown in the product introduction screen.
What actually happens to this vertical movement upon impact? If anyone understands this, please let me know.
Clutch lever has the same comment.
View detail
Fits: HONDA CB1000SF, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA VFR1200X, HONDA VFR800, HONDA VTR1000F, HONDA X-4, HONDA CBR600F4, HONDA CBR600F4I, HONDA CBR900RR, HONDA VTR, HONDA VFR800F, HONDA VFR800X, HONDA RVF400, HONDA NSR250R, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA DN-01
A little disappointing.
I purchased both Brake and Clutch.
It is a little more expensive than other products, but I wrote it because I thought the reviews were not bad.
I was able to install the brake without any difficulty, but the clutch was so reluctant that I could not get it into the holder.
Unsatisfied, I took it off and checked the product again, and found that the sleeve through which the pivot bolt passes protrudes a little from the body.
I was not sure if it was correct, so I removed the brake lever again and found that it was not coming out, so I thought this was the cause, and after correcting and installing the sleeve of the clutch, it became Smooth! 。
I was disappointed by the poor quality control.
The lever position can be finely adjusted, it looks good, and the grip is good, but…
I may be biased, but the package was labeled "Made in China" and I had a feeling that the quality was commensurate with the quality of the product.
I would choose another product next time.
View detail
sensation
Better and more solid than OEM, but
It may not look good depending on how you play with it and your other parts choices.
View detail
Fits: YAMAHA TW225, YAMAHA TW200, YAMAHA DT230LANZA, YAMAHA DT200R, YAMAHA DT125R, YAMAHA DT200, YAMAHA BRONCO, YAMAHA TRICKER, YAMAHA XT250X, YAMAHA XT250, YAMAHA XT125, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA WR250X, YAMAHA WR250R
More than you can imagine.
It was shorter than I had imagined.
Just fine to use for appearance issues.
View detail
Fits: KAWASAKI VERSYS-X250, KAWASAKI D-TRACKER X, KAWASAKI KDX125SR, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI D-TRACKER125, KAWASAKI KLX150BF, YAMAHA WR155R, YAMAHA XTZ125, KAWASAKI KLX125, HONDA TRAIL125, HONDA CRF250M, HONDA CRF150L, HONDA CROSS CUB110, KAWASAKI VERSYS-X300, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230SM, KAWASAKI KLX230R
It bent when i dropped my bike tho
I know these things are supposed to bend but not permanently though . I'm sad. Was good till they bent . RIP . For all u guys out there. Get them hand guards . Much love ❤️✌ View detail
Fits: YAMAHA TW225, YAMAHA TW200, YAMAHA DT230LANZA, YAMAHA DT200R, YAMAHA DT125R, YAMAHA DT200, YAMAHA BRONCO, YAMAHA TRICKER, YAMAHA XT250X, YAMAHA XT250, YAMAHA XT125, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA WR250X, YAMAHA WR250R
Attached to WR
I'm trying to get away from the Hand guard, and I'm trying to get away from the Hand guard, and I'm trying to get away from the Damage that seems to be less likely to fall over. I ended up with this Lever from Foldable.
The production and accuracy is perfect, and the finish is beautiful with Anodized Treatment. I was satisfied as soon as I installed it, but then I started using MAGURAHydraulic Clutch Along with the introduction, Brake Side was also changed to MAGURALever, so it was only a few months of life!
I'm thinking of putting it back if the Lever breaks, but it's not easy to break.
View detail
Fits: YAMAHA YZF-R1S, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA TRACER900 GT, YAMAHA MT-09SP, YAMAHA MT-09
I like the shape
Used with YZF-R6 18MODEL
Is it a little thinner than OEMLever?
I don't mind it, but some people might not like it
You can adjust the level of detail
View detail
Fits: YAMAHA TW225, YAMAHA TW200, YAMAHA DT230LANZA, YAMAHA DT200R, YAMAHA DT125R, YAMAHA DT200, YAMAHA BRONCO, YAMAHA TRICKER, YAMAHA XT250X, YAMAHA XT250, YAMAHA XT125, YAMAHA TT250R RAID, YAMAHA TT250R, YAMAHA SEROW250, YAMAHA SEROW225, YAMAHA WR250X, YAMAHA WR250R
Combined use with Yamaha OEMBrush guard
I got on SEROW 250, but I knocked out Motorcycle and the Clutch lever bent, so I bought it for replacement. The product itself is very good and beautiful, but when used in conjunction with the OEM 's Rush Girt, the Lever' s upper and lower thickness is thick, so it interferes with the Guard and fixes it to the Bracket ScrewQuantity : Struggling to stop 2pc.
I think that I want to try it for a while. It is unknown how strong it is at the shop front. (I was using Rough & Road 's Short lever before, but when I fell down again, I bent again.
Lever To prevent damage, the Handlebar Guard is certain, but I do not want it because the body width gets wider. )
View detail
Fits: KAWASAKI VERSYS-X250, KAWASAKI D-TRACKER X, KAWASAKI KDX125SR, KAWASAKI KLX250, KAWASAKI KLX150S, KAWASAKI KLX230, KAWASAKI D-TRACKER125, KAWASAKI KLX150BF, YAMAHA WR155R, YAMAHA XTZ125, KAWASAKI KLX125, HONDA TRAIL125, HONDA CRF250M, HONDA CRF150L, HONDA CROSS CUB110, KAWASAKI VERSYS-X300, KAWASAKI KLX300SM, KAWASAKI KLX300, KAWASAKI KLX230SM, KAWASAKI KLX230R
Since the lever of the regulation type of the cheap article of Yahoo! Auctions attached before had been folded by blow from the root, it purchased here. Since regulation is stepless, it can look for the distance which suited liking of it. Appearan
Since the lever of the regulation type of the cheap article of Yahoo! Auctions attached before had been folded by blow from the root, it purchased here.
Since regulation is stepless, it can look for the distance which suited liking of it.
Appearance is dramatically beautiful and its sound called sushi aluminum forging is very good.
View detail