Reviews
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ450F, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA WR250R, YAMAHA WR250X
Easy to read. Looks awesome. Better than factory in every way
Great product.This makes the hashes so much easier to read. No more breaking out a tape measure everytime you adjust the chain. Was also able to figure out my hash marks on the swing arm do not match left to right. Drastic improvement for function over oem. Bought these to replace the mis-matched axle blocks that the installed on my friend bike. The colored anodized finish make these look trick, while they fit perfect and are easier to read than the standard blocks when adjusting your chain. You can also reverse them to get additional fore-aft adjustment if needed, and at a great price. The stock adjuster blocks tend to pivot when tightening the axle nut. These blocks are made with tighter tolerances so they don't rock when tightening the axle nut. This eliminates any doubt that the chain alignment marks are the same. I have over 50 hours on them and they are holding up great. Webike too fast.Thank you also for the fast shipping and nice packaging. View detail
Fits: HUSQVARNA TE125, HUSQVARNA TE300, GASGAS EX250, GASGAS EX300, GASGAS EC300, GASGAS EC250F, GASGAS EC350F, HUSQVARNA FE501, GASGAS EC250, HUSQVARNA FE250, HUSQVARNA FE250-501, HUSQVARNA TE125-300, HUSQVARNA TX125, KTM 530XCF-W, KTM 530XC-W, KTM 125-530XCF-W, KTM 125XCF-W, KTM 530EXC-F, KTM 125-530XC-W, KTM 125XC-W
Great way to ensure adequate chain adjustment,Blue matches Husky
Previous owner installed some cheap aftermarket aluminum axle blocks which were too narrow and malformed when torqued to spec. bought these for my friend and they fit great and work perfect! Cant beat the price either.Stock blocks were worn out and damaged, these Zeta blocks were an excellent replacement.I picked these up because zeta usually has good price to quality ratio and they work perfectly. I can torque my axles to spec and no malforming in the aluminum. This makes the hashes so much easier to read. No more breaking out a tape measure everytime you adjust the chain. Was also able to figure out my hash marks on the swing arm do not match left to right. Drastic improvement for function over oem.I'm glad to doing shopping from you , Thanks for fast shipping.Highly recommened. View detail
Fits: HONDA CRF450X, HONDA CRF450R, HONDA CRF250X, HONDA CRF250R, HONDA CR125, HONDA CR250
Great middle of the road block
Zeta never has let me down. All of their parts look trick and stay looking that way ride after ride. Their shifters are unbreakable and these axle blocks are as clean as the day I bought them!Love the look of these, only downside is the left one is hard to read the markings.You can also reverse them to get additional fore-aft adjustment if needed, and at a great price.You really have to get low in order to see the numbers. If they made one thicker than the other this would not be a problem. This could be isolated to the CRF's but thats my only complaint. Other than that appear to be top quality. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR450F
For chain tension adjustment and dress-up
I bought this because the OEM Axle Block was distorted for some reason and it was hard to see the memory when adjusting the Chain. The result is very good, the chain adjustment is easy to understand and it looks good with Accent design. I wish the price was a little lower. View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ450F, YAMAHA YZ250F, YAMAHA YZ250, YAMAHA YZ125, YAMAHA WR250R, YAMAHA WR250X
For those who change Sprocket Iloilo it is especially recommended
ChainLength correspondence range widens if you change the direction.
I wonder if there are Merit that only changes the scale readily.
☆ If it is a bit cheaper ☆ 5 - - - -
For those who change Sprocket Iroyro, the extent of the subrogation is wide so it is possible to respond to some extent without changing the chain.
The picture is in WR 250 R with FrontNORMAL, Rear 46 T, Chain 110 LINK.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY S, HONDA CRF300L, HONDA CRF300L RALLY
Convenient
OEM also Material : There are graduations with Aluminum, but even if you turn it in the opposite direction or do anything, the scale will come only in front of Bolt or behind it, so it was inconvenient when adjustment was necessary in a place with no scale.
With this product, up and down and Quantity : Pair (for Left and Right) Because there are graduations in, you can easily adjust. So, you do not have to take out Axle and change the direction of Block, Quantity : Pair (for Left and Right) It was released from work such as measuring.
Since the kind of Instruction Manual is not attached, I was at a loss as to how to install it.
Chain is changed but since it is OEM's LINK number, if it is opposite to the installation of the image, it seems to be a feeling of tightening all the adjustment Nut and still it seems to be the feeling that Chain is putting on this way. So I feel that adjustment Nut is out considerably.
If you change the number of LINKs and lengthen the Wheel base, you interpret themselves as if they should be in the opposite direction?.
The appearance is good with Red Accent included. In this way, I'm curious that Axle's Nut is a bit old (Lol).
There is no change in running, there is graduation - With Color - As a substitute only for One point, I feel like Gold is high, but I think that PetitDress-up or Motorcycle Maintenance on a daily basis is recommended for those who are myself.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L, HONDA CRF250L S, HONDA CRF250RALLY, HONDA CRF250RALLY, HONDA CRF250RALLY S, HONDA CRF300L, HONDA CRF300L RALLY
One point of feet
【What made you decide the purchase?】
In OEM's Axle Block, Quantity : Pair (for Left and Right) Since adjustment was Large strange, this item is with scale, so I bought it.
【How was it actually used?】
Chain adjustment became Large songs.
Moreover, I am satisfied with Large as a one point of my feet.
【Was it difficult to install? (Hard parts case)】
Just unplug the Axle and install.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There is none.
View detail