Reviews
This is very good ◎
[How is it used?
I installed it on Yamaha's WR155R. Handlebar is Zita's CX Handlebar MX-412.
Was the one you received as per Image?
I received the item as per the product Data. I chose the one without Mirror Adapter.
Was the installation difficult?
It is very easy as it is the same as normal clutch wire installation.
How was your experience with it?
I have been using ZETA's Flight perchSeries Clutch Holder Set on my road motorcycle and it was so good that I decided to install it on my off-road motorcycle.
UltraLight clutchPerch As the name suggests, it makes the clutch very light. Normally, when you install a short lever, the shorter the image is, the heavier the clutch becomes.
Ratio can be changed.
Lever position can be adjusted.
I think that this is the Large Merit. Because the settings can be made in detail, it can be set to fit any motorcycle and any rider.
I believe that the weight of the clutch is so important that it can make the difference between light and dark!
Clutch operation is quite tiring, even though you don't notice it. I once rode a motorcycle with a heavy clutch for some reason, and my left hand felt like it was going to get cramped.
The price is there, but Holder and Lever are Quantity:The set is a good choice for a lightweight product at such a low price.
It looks good!
Repair Parts is also available in case of emergencies.
[Included Parts:were they on?
It has a Rubber AdjusterCover.
[Was there anything that disappointed you?
I am not disappointed, but would like to see a Black Lever setting as well.
View detail
Installed on L2GSX-R1000
Installed on GSX R1000
Clutch switch has been shorted and so far no problems.
Wire adjustment has become super easy and I feel lighter on the Clutch.
View detail
100% accurate item.
Installed on a honda wave s 125. perfectly fit no issues at all, item came in a box sealed. seller is very nice. will buy again in the future. View detail
zeta
Zeta products have a good finish. The motorcycle will become more beautiful. Clutch adjustment would be easy. I want to hang this on the bike quickly. I want to run and do full break. View detail
Clutch is light!
I bought the UltraLight clutch which I had been interested in for a long time. The clutch of my car YZ125X is not particularly heavy, but I introduced it because I wanted to make it controllable even a little. As a result, I had to test it at the JNCC, but even when I was tired after long hours of riding, the lever operation did not become painful and it was very helpful. View detail
Worth it!
It was installed on XG250 TRICKER.
The RatioDevice was installed at number 2, but it was still more than light enough.
If you can do Wire lubrication, you can do Level without any problem.
There is not one Minus element at the time of installation though it is the place where I want to confirm the Downs of Sleeveetc. by using the texture well.
The price is more expensive than DRC's, but I'm satisfied with the Level that makes up for it.
I was on the fence about buying one, but I should have bought one sooner!
View detail
Fits: HONDA CRF450L, HONDA CRF450R, HONDA CRF450RX, HONDA CRF450X
A so-so product, I guess!
The product and installation are satisfactory
The COST aspect of it is undeniably high
Manufacturers are expected to reduce COST from the customer's perspective
View detail
Perfect fit.
Perfect fit, it’s much nicer than the stock bracket. Lots less flex and much easier to control slipping the clutch at low speeds. In addition it looks very custom. View detail
Focus on appearance.
It is the best Parts for me who likes bonsai. It is a part that I do not notice if I do not look good, so it is a completely self-satisfying world. Especially the performance does not improve, but it is a recommendation for people who place importance on the appearance. View detail
It seems to be inconspicuous and presence
Beginner's installation was also very easy for me. Since Motorcycle's Coloring is red, it will be tightened. Because CRF 250L is made by Thailand, I feel that the surface of the Plating part is rough as well.
I feel that something has become slippery with this part.
View detail
Light weight & Dress-up!
CB1300SB I used it for RearSprocket installation of MODEL 2014.
Normal nut has a two-sided width of 19 mm, Titanium nut is 17 mm.
Screw diameter is the same so you can use it as it is.
Moreover, because it is in loose dowel Nut shape, I thought that it was hard to loosen but for the sake of just making it, I applied a very small amount of Screw stopper.
NutQuantity : 5pcs. In total, the weight has been reduced to 55 g.
View detail
It looks good Parenthesis
There was not for WR 250X, but I bought it because it was released in a new product. The installation can be replaced if there is as much as 5 minutes. I feel satisfied that the feel of grasping Clutch is unchanging, but its appearance is Parenthesis. View detail
I will not slip..
Because there are holes, there is no worry that hands will slip when operating Clutch.
Although I do not adjust the play frequently, it is very easy to adjust.
It looks good, and it is a bargain, but you need to process the Clutch switch to install it on a commercial car.
View detail