Reviews
I think the texture and windproofing are both quite good
I think the quality is very good. The windproof performance is also good from the helmet down, and the speed is not so high since it is a MONKEY125, but it is quite comfortable for touring at around 60km. View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Hokkaido Tour
this summer
Hokkaido Touring Schedule
Little by little, we prepare for that.
Removed for forest road touring
with ScreenKakeTamaMaju I can't mock up comfortably.
Easily removed by PointUp??
View detail
Cool
This is Cool, although I honestly don't know how effective it is.
Red is good.Color:Red is unexpectedly suitable for Gray Motorcycle.
View detail
Windproof effect.
There are many videos on youtube etc. for installation, so you can install it while referring to them. As for the windproof effect, it has a windproof effect from half of my face to my chest area. The Demerit has a screen that creates turbulence, which causes the head to shake when the wind blows against the helmet. The height and angle of the screen must be adjusted as often as possible to avoid turbulence. It is not enough to just raise the screen, but it is better to adjust the image so that the turbulence hits the entire helmet and the wind pressure is dispersed throughout the helmet. It is not easy to adjust the helmet, but I like it because it reduces fatigue during long tours, and it also makes the helmet look more like a travel helmet. View detail
To prevent mud clogging
I bought the Chain after seeing someone with a Chain that was stuck in the mud and disconnected.
I think people who often rush into mud as well as Dress-up should purchase this product.
View detail
The dignified appearance is atmospheric.
I use the IMSBig tank's OEM fuel cap, which does not have an arrowhead retaining mechanism, so no matter how hard I push it in, it comes off after 30 minutes due to the reaction force of the hose. The adhesive strength of the Aron Alpha is definitely ??????????. I like the way it stands up to the Chocolate. View detail
Easy to install
The Instruction Manual is easy to understand and I was able to install it easily even though I am not familiar with it. It also looks good. View detail
Fits: HUSQVARNA 701ENDURO LR, HUSQVARNA 701ENDURO, HUSQVARNA 701SUPERMOTO
PetitAdventure
I installed it on a 2023 701 Enduro.
In this year, the BlinkerIndicator will be hidden in the shadow of the Bracket, so it will be harder to notice if the Blinker is forgotten to be turned off.
The rest of the hose is a little tight against the clutch hose, so we added a wire cover to the part where the hose hits the clutch hose.
Installation itself is easy.
It is also useful when installing Navigation, Smartphone, and Camera for Dora Recorder.
I prefer to install the RALLY50Tower, but this is easy to install and has a good windproof effect, so even if you are not ready to install the RALLY50Tower, you can easily install the PetitAdventure. (or Tourer) You can feel the mood.
View detail
It gives a sense of custom.
The OEM cover is silver, and the Pivot is silver as well, so replacing it with this black anodized product will give it a customized look.
The SUPER CUB's Chain Guard is just stuck in the pin and comes right off, but the CT110 HUNTER CUB has the tip of the pin melted and crushed, so you have to shave the pin a little to remove it.
It is easier to work with the Change Pedal and Pivot Cover removed as well.
As a side note, when I removed the OEMOption Change Pedal, I found that the screw threads on the fixed bolt were stupid.
View detail
I recommend it for the low price.
It is a good product in terms of practical design and low price.
If the product is not installed properly due to shaking due to a large impact, it may come off or become distorted.
We recommend that you use this product at first and then exchange it for another product later.
In terms of appearance, this is a recommended product.
-------------------------------------------------- -------- It is a decent product in terms of practical design and inexpensive. If the product is not properly mounted through a big shock, it may be missing or distorted if the product is not mounted properly. At first, I recommend using it as this product and later exchanged to other products. It is recommended in appearance. Powered by Google Translator
View detail
ZETA AdventureWindshield、LargeScreen
The Universal Screen I used before was a type that was attached to the Handlebar, which inevitably made the Handlebar operation heavier, but this type is attached to the Handlebar Clamp, so I think the Handlebar operation has become lighter.
In the case of my car, it was a little difficult to install because I have a Handlebar Up Spacer installed, but I think it can be done without much difficulty in the case of a normal car.
If I had to say something more about the actual use, I would say that if the straight portion of the mount bar were wider, it would be possible to mount a variety of objects.
Overall, I am satisfied with Large.
View detail
One pointAccent and hidden features
I used it on a Yamaha YZ250 and the red Anodized Accent looks great on the blue chassis. I like it very much.
I have a hunch that the attached hose will come off because it looks like a non-shrinkable piece of PVC, but it doesn't really come off.
I took off one star because of the Image. I bought this for the following two reasons:(1) the grease is washed away because the stem bearing is not covered with gasoline, (2) the grease is not allowed to rust, and (3) the gasoline does not leak out. I bought it to prevent rust and prevent gasoline from leaking out. I am satisfied with it.
Sorry to add, the part somehow fell off and went missing during a Motocross practice run, I think the hose part should be for OEM.
View detail
Material is Aluminum
The design follows the body of the car with little overhang, making it a recommendation for use with side bags.:It's aluminum, so it's more expensive than the others. View detail
Refreshing
After replacing the rear suspension, it became difficult to install the OEM ducts, so I was running with the ducts upside down, but the parenthesis was not good, so I purchased this product. The installation was so easy that it was a no-brainer. I wish the price was a little lower.
I am not sure of the effect at all, but I am satisfied with the appearance of the Refreshing together.
View detail
Fits: Others ZETA COMP Handlebar, Others ZETA CX Handlebar, Others RENTHALHandlebar, Others HondaOEM 13mm diameter Brace
I wish it were a little longer in the vertical direction.
[How is it used?
For Commuting and Touring
Was the one you received as per Image?
I wish it was a little longer in the azimuth direction.
Was the installation difficult?
No problem
How was your experience with it?
Either the rectification effect is not as effective as expected or the angle of installation is bad, or the wind tends to roll in on the body.
[Included Parts:were they on?
Mounting parts are fine.
[Was there anything that disappointed you?
Rough&Road's Screen has a better rectification effect on the body
Other items that would be helpful
Points and hangs for installation/The screw part is shallow with sandblast and there are places where it is caught, so it is better to temporarily assemble the screw after spraying lubricant/Points to note/If there is a machining part of the female screw part, it may be smoother to tap the part before installation. Opinions and requests to the manufacturer/It would be better if the screen was a little longer in the vertical direction, a little more. [Color] I want a Screen with darker Smoke, Screen chattering on bad roads.
View detail
Sounds good
I installed it on my CT125 JA65 and I am satisfied with the Large type because I can feel the wind protection effect while driving. I also appreciate the bracket that can be used as a cell phone mount. I am glad I purchased this product. View detail
Well feeling is there.
It is for KLX250, but I installed it on SUPER SHERPA.
From the beginning, Screen's mounting parts are scratched and the dimensions of the bar are different, but it is functional.
The screen does not shake or deflect when running.
I thought it would be easier to adjust the height of the bar or Screen if the direction of insertion of the Bolt in the Clamp section where the bar is attached was reversed.
View detail
Can be installed tightly
In my previous car, I used a mirror mount windscreen, but I feel that this product, which uses a handlebar clamp, is more firmly attached. If you do not follow the instructions properly, you will have to redo the cable routing, so please read the Instruction Manual carefully. The Smartphone Holder on the Mount Bar allows me to check the Navigation screen without moving my eyes too much, which is a big plus. The CT125 has a meter panel at the bottom, so I felt a little lonely in front of it, but now it's nice and lively. View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
Just the right wind protection, easy Rally-ization Custom
Purchased as a countermeasure against direct wind in winter. installed on CRF250L MD47.
Installation is easy as it is just a matter of replacing the upper stay on the handlebar.
If there is interference, the angle of the Brake lever must be adjusted.
The windproof effect is quite good, even at 60 km/h the wind blowing against my body is reduced to the point of my nose on the Helmet.
At high speeds, it becomes a bit of a Drag, so it may not be suitable for those who fly.
Up to 100 km, no problem.
I will probably take it off when the weather gets warmer, but it's not hard to take on and off, so I'm sure I'll be using it every Winter Season.
View detail
ParenthesisFocus on goodness
Parenthesis is good - Z ETA
Focus on appearance, maintenance up!
The Shift Pedal is now easier to adjust, and there is nothing to complain about.
View detail