Reviews
It's good.
The effect is... I honestly don't know.
Atmosphere. www.
View detail
Windproof effect is increased.
I installed ExplorerWindshield on my CL500 and love it.
Purchased LargeScreen for additional wind protection
70mm upward and 60mm larger in width.
The windproofing effect has been improved, so Standard Screen
It's good for people who are tall and concerned about Wind Cutting noise.
However, in my case (Height 171cm) The top edge of the Screen is exactly at eye level when you are sitting down.
It bothered me so much while driving that I went back to Standard Screen.
Just taller as above. (180 cm or more) Then I think the top edge will be slightly below eye level.
Combined with the windproof effect, I think it is satisfactory enough.
View detail
Mounted on EC250
I installed it on a GASGAS EC250 2023, which I always use for forest road touring.
The Hose stuck in the Tank allows Gasoline to flow back into the HeadBike when it falls over.
In this case, grease around the Stem will drop, causing Rust and worsening Handling.
This cap is available in a lineup of different colors, and it is a good part with an easy customizable feel.
However, after two rides after installing it, it came off when I fell down somewhere or lost it.
I ended up buying a second one right away, also in tears.
View detail
Leaks.
Is it just my Motorcycle?
Fuel leaks if you roll or willy.
The Chinese one I used to wear on Yahoo!
Is the attached Hose Material not good enough?
View detail
Fits: HONDA CRF110F, HONDA CROSS CUB50, HONDA CROSS CUB110, HONDA MONKEY125, HONDA CT125, HONDA TRAIL125, HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
It looks beautiful, but!
The original shape is a little smaller than the original, but the Mizo is a little larger! View detail
Fits: HONDA CB500X, YAMAHA MT-09 To Racer, KAWASAKI ZX-25R, HONDA NC750X, HONDA CRF1000L Africa Twin, HONDA NC700X, HONDA CRF250 RALLY, HONDA 400X
Lighter than I thought.
It was lighter than I thought it would be:??
It looks good
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
It did not fit CRM250AR
I bought the same Honda system to put on my CRM250AR, but the front/rear distance did not match the CRM. (Shield too far forward).
The CRM seems to fit better with the WR250. I don't think there is any problem with the product itself.
View detail
Fits: Others ZETA COMP Handlebar, Others ZETA CX Handlebar, Others RENTHALHandlebar, Others HondaOEM 11mm diameter Brace
Screen Mounting
We installed a screen on our ts185HUSTLER as a measure against long distance touring. I was looking for something easy to install, and I chose this ZETA Screen because I heard that it can be installed on the Handlebar Brace. So I fixed it with a thin rubber.
On the highway, the Screen started to turn up around 90 km/h. This may be due to the Rubber Spacer. On the highway, the screen started to turn up at around 90 km/h, possibly due to the rubber spacer, and sometimes fell down over bumps in the road. Since 3 types of Hexagon Bolt are used, the Hexagon NutQuantity:I can't work without the 1 Set, and the Brake Wire seemed to interfere with the bar and wire, so I tried a number of different ways to install it.
View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR250R, YAMAHA WR250X, SUZUKI DR-Z400SM
Fork Guard Bolt Set
BonsaiParts (Not so obvious)
Will it be lightweight?
I bought it because it was inexpensive.
View detail
Strength is solid.
I was thinking of buying a Handlebar to mount my phone, but I bought this product because it can also mount a phone with Screen.
I like the Screen Mount bar because it is solid and matches the shape of the Handlebar.
Since the Screen is STD Size, I don't feel the windproof effect so much, but I think the size feeling is good.
View detail
Quantity from the beginning:I wanted a Set of…
[ITEMS TO BUY TOGETHER
Naturally, Zita's AdventureWindshield
Because it is an Option…
[How is it used?
Purchased as an Option for the Screen of Zita to protect the CT110 HUNTER CUB from wind. I will remove the Screen in summer and use the LargeSmall in spring, fall and winter.
Was the one you received as per Image?
Same as the NORMAL version, transparent, no distortion, satisfactory.
Was the installation difficult?
Bolt is included for easy installation.
How was your experience with it?
The NORMAL version has the inflow of wind from the bottom of the Jet helmet coming to the Large amount, but the Image here is a little noisy as it directly hits the Helmet's Screen.
However, it is also large in width, making it perfect for wind protection.
Quantity from the beginning:I wanted something from Set.
The angle cannot be adjusted by the design of the front carrier.
[Included Parts:were they on?
Bolt and Rubber with Washer
[Was there anything that disappointed you?
The product is almost exactly as expected.
As I mentioned before, there are some problems, but I'm glad I bought it.
View detail
Fits: SUZUKI RM85, SUZUKI RM125, SUZUKI RM250, SUZUKI RM-Z250, SUZUKI RM-Z450, SUZUKI RMX450Z 10-13
It's neither good nor bad.
It is not a product that is neither good nor bad, partly because it is not a car model-specific design. However, the functionality of the product is not bad since it is made by ZETA! View detail
FinalSEROW AdventureWindowShield
I bought it because it looked easy to install, but I could not install it properly due to interference of wires. View detail
Fits: YAMAHA YZ125, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450F, YAMAHA WR250F, YAMAHA WR400F, YAMAHA WR250R, YAMAHA WR250X, SUZUKI DR-Z400SM
less conspicuous
I installed it on my WR250X
You will be delighted to see it Shiningly and shining.
Frankly, it is not very noticeable.
View detail
Cannot be installed on JB03.
I wanted to have it with Zita Brand but it could not be installed on JB03.
The quality of the product is very good and I recommend it for JB02.
View detail
Fits: KAWASAKI KLX450R, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX80/II, KAWASAKI KX85, SUZUKI 250SB, SUZUKI RM-Z250
high
I replaced the OEM because it was getting tired.
The OEM color is just a plain bolt, so replacing it with ZETA's Fork GuardBolt will make it stand out.
For dress-up purposes, I think it is quite effective.
The only colors available are Red and Blue, so I would like to see other colors. Personally, I'd like to have a black one, but I guess I'll have to paint it myself.
I am satisfied with the results. I recommend it.
View detail
Design is good, but...
One of the adapters that attaches the screen to the mount bar has holes, but the two screw holes that are supposed to be penetrating were not cut, so the screen side could not be attached.
I had the screws cut at a motorcycle shop I know and avoided returning it. I think the design is good.
View detail
ZETADrive cover
It looks so much better now. I wonder if it's really Large sturdy with all this open... View detail
A little disappointing
I installed it for dress-up purpose.
BALI is terrible and M4Washer is Quantity.:I was a little disappointed that I was 1pc. short.
I am satisfied with the Design.
View detail
Fits: HONDA CRF150R, HONDA CRF250L, HONDA CRF250M, HONDA CRM250AR, HONDA XR250, HONDA XR400 Motard, HONDA CR85 R II 97-07, HONDA CR85 R 97-07, HONDA XR250MOTARD
It'll make your feet stand on end! Kana.
Material:Because it is aluminum, it may become lightening, but because it is originally a very small screw.
But when the color is added to the tip of the front fork, it looks tighter.
I wasn't expecting much, but I was surprisingly pleased with the results.
It's for people who can separate it from the appearance Custom.
View detail