Reviews
It was supposed to be scratch prevention...
I purchased this product to prevent scratches caused by off-road boots on my wr250rAluminum Frame.
I think this product will prevent scratches caused by Boots.
However, this product itself has no BALI, but the Edge is standing up, so if I installed it directly, the Frame would be scratched by this product. I hurriedly bought SpongeSeal at a nearby Home center and attached it to the back of the frame.
The thickness of the SpongeSeal used is 5mm, for reference.
Other than that, no complaints!
The Frame of R is Silver, so it is not noticeable, which is good.
I don't know if X is necessary since it is MOTARD to begin with, but I think it will stand out since it is FrameBlack. I think there are different tastes here.
View detail
Mounted for frame protection
I installed it to protect the Frame from being scraped by OffBoots.
The build is made of thin aluminum, so it is unlikely to be able to withstand large impacts.
I thought it would be enough to prevent scratches from rubbing with Boots.
If you don't mind the scrapes, you don't need them.
View detail
Fits: KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI D-TRACKER-X
Poor balance between price and quality
The Frame started to get scratches on the Frame, so I bought it, and the TRAILfor Vehicle ones are not so much I didn't have one, so I went with a zeta product
It's just Hairline processing on a plate of aluminum It will be full of Wound soon
There is no problem in the accuracy of the installation & rarr; hole position etc., but if you install it as it is, you will have no problem
There is a point where it hits the Frame, but it might wound the Frame I pasted the thin rubber sheet to the strongest place with double-sided tape other (esp. people) 。
Because you can fix the Frame firmly with OffBoots, you can use Tan DIN
It's easier to ride with a gu
Because of the large gap between the frame and the guard, it is easy to catch branches, etc. on the forest road, so the course I think that soil tends to accumulate in the I think that I will put Sponge etc. in between
It looks like they have carbon and plastic ones, but the fixation was Tie Wrap
I bought this product because I thought it would be damaged by a fall, but it doesn't feel very solid Mm.... hand Gulp And I can bend it just by doing it. lol
Originally, because it is a product for the prevention of Wound, I do not care about Wound etc. in use, but the price If the product is expensive, then it has to be of a reasonable quality and look, or it's not a satisfactory product I would have appreciated it if it was a little cheaper, lol
View detail
Fits: KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI D-TRACKER-X
The installation system is bad
It seemed that the position of the Screw hole was slightly misaligned as other people were reviewed..
Some sharpen etc.. I think that it will be necessary to devise such ingenuity.
Protection performance is unknown, but Knee grip may become easier.
Would not it be better to purchase it as Dress-upItems?.
View detail
Fits: KAWASAKI KLX250, KAWASAKI D tracker, KAWASAKI D-TRACKER-X
The purpose can be fulfilled but the accuracy is bad
I do not have any particular points (Lol) The purpose is achieved.
Bad point is bad accuracy. First of all, Screw holes do not fit and some cutting is necessary
As soon as Screw head does not fit in Body, we exchanged with Small Head Screw.
And the angle of the bent part does not match. Although it is necessary to adjust the angle with actual spot
You will need something like a vise to do for Beauty.
Also, to improve the processability at the manufacturing stage originally, Slit is lightly included in the folding line.
If you adjust it many times it will be politely broken with Gold genus exhaustion.
Although it does not do almost any surface treatment, it is more than the company's Skid plate
Considering that it is a place to rub it, I'm getting slippery.
Is not it better if the texture after consumption is cool?
Since there is only Frame guard for KLX and Carbon,
Although it is not as Designful, purchase for the purpose of protecting Frame.
Since Carbon 's MODEL has replaced Rear master to Yankaha' s Tank integral type than Gold 's face value, I can not expect it, I thought that Aluminum that can process was better and stopped.
In addition, we are also assuming that we will make one-off in the future, so we are considering it as a starting point for that.
View detail
There are also other models
I inquired and purchased for RMX 250 S. There are also other types of cars so please put them up soon.
It is an Anodized item of satin finish. If possible, Color Anodized Aluminum such as Gun meta was good - - -
Because satin silver, soiling etc. are very conspicuous. There is no Clear paint on the surface.
There is also a place not along Frame Curve and you need to fix it.
It is considerably impossible for the price. Now it is difficult to purchase custom parts with out of print cars so it was not satisfactory although I purchased it without any choice.
I am also using Z - CARBON, but there are considerable differences in the result.
However, it is a pleasure to revive the outdated car Parts. Manufacturer's enthusiasm for ☆ 4. But Y'SGEAR like LePeraAluminum board is not a plate, there is a reasonable thickness so strength is no problem. Practicality is high, so it is Recommendation for those who place more emphasis on functions than it looks.
View detail