Reviews
Fits: HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L, HONDA CRF300L RALLY
Good product
About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing "Very good product" View detail
Protect Engine
Product Name
ZETA Zita ED Skid plate
Item Number
D5436
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
15 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this to protect Engine, Brand has several, but this one was recommended to me by a friend.
Was the one you received as per Image?
It was exactly as shown in the Image. It looks sturdy!
Was the installation difficult?
It is not particularly difficult. Just screw it on.
How was your experience with it?
I was able to protect the Engine with no problem even when hit by rocks and other objects. HardEnduro seems to have no problem with this.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
I was able to install it this time.
I was able to install it on a new 23 year old car. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Interference with exhaust pipe of PowerBOX.
Exhaust pipe is SP Tadao's PowerBOX and Silencer is YOSHIMURA. However, when we tried to install the bracket, the bracket interfered with the exhaust pipe and could not be installed. I was able to install the bracket by shaving 5mm off the interference part with a grinder.
As for defenses, this will certainly protect Radiator.
It seems to be easy to wake up in case of a fall. (^^)
It looks Matcho and it looks good!
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
No interference with POWER BOX
I installed it on my CRF-RALLY (MD47) and was not sure whether to purchase it or not because I had installed SP Tadao POWERBOXPipe item number:CR2-PB-21 on the exhaust pipe and there was a possibility that it might interfere with the power box. (Incidentally, ZETAPipeTank Guard item number:ZE55-1010 was answered that the POWER BOX part would hit the tank, so we decided not to purchase this item. I bought it with the intention of shaving it with a grinder if the need arises.
As a result, the Limit was not hit. Installation was not too difficult, and there was no interference with the frame or cowl. The style is now more adventure-like. The protection is still unknown because I haven't run or rubbed it yet, so I give it 4 stars.
DirtFreak's response to my last inquiry was very fast, and their response was very thorough and favorable.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Tank Guard for current MD47RLY50
I'm glad to see a good product on the market, as there are only a limited number of Guard types for the current crf250RLY50MD47. The Guard itself is safe in the event of a fall, but I am concerned about the strength of the bracket on the body side of the front mounting bracket, but this is not a problem with the product. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Engine Guard for current MD47RLY50
The quality is solid and seems to protect the vehicle body. If the reinforced pipe under the under guard can withstand obstacles, I will try to get over them as soon as possible. View detail
I like that the quick stand has a wider contact surface.
The stand has become wider, so it feels more sturdy, and the clamping force is good.
I don't think you should tighten it too much when tightening it. I think it would be good to give guidance on the level of tension.
The dress-up effect is also the best..^^
I will use it well.
ZETA is also good.
-------------------------------------------------- -------- The stand is wider, making it a bit stronger and good with a feeling of fastening. I can't tighten too much when I sign up. It would be better to guide the tension level. The Drone Up effect is also the best.. ^^ I will use it well. Zeta is also good. Powered by Google Translator
View detail
Exactly to crf250rally17in.MOTARD!
The OEMSTAND was in an upright position, but as expected of an exclusive product, it is Exactly. The Bolt is very hard to install, so you will have to have the right tools to lick it off.
Seat height is too low, so I am considering high seat!
View detail
Required when using Maintenance Stand.
I purchased it together with the Maintenance Stand to replace the ChainMaintenance and Exhaust System. I am very satisfied with the low price and good quality. There is no rattling when using it, and it is very easy to install. I bought it together with Y's Gear's Maintenance Stand, but if you are using yzf-r3.r25 and looking for a Swingarm Spool, I think you can't go wrong if you buy this one. View detail
It is a product of a trusted Brand, so it matched TENERE perfectly!
Zeta is a Brand that I have heard a lot about and felt familiar with, so after comparing similar products from other Brands, I decided to go with Zeta this time. The installation went without a problem and the Parts fit perfectly with TENERE (2024 MODEL).
Since this is a product with a wider leg of Side Stand, it is natural that, depending on the ground conditions, you will kick the ground when setting up the STAND, so we often apply the STAND by pushing the Motorcycle a bit toward the Right.
View detail
ZETA ReplacementTip
Purchased to fine tune the height of the Side Stand. I am a little worried when parking the car because the body of the car is a bit laid down, but so far it is Large and sturdy. The length is fixed, so I hope there will be a product that allows free size adjustment. View detail
Zita Forged AluminumKick Stand
I installed it on my crf250lmd47 to make it look cool and solid. View detail
Quite stable.
Since the top case was attached far back, it was often wobbly, but with this attached, it became much more stable. View detail
Firmly Guard
It protects you from forest road attacks and unintentional falls.
Compared to the lightweight aluminum products of other companies, the ZETA is a bit heavier, but the sturdiness of the ZETA makes it a very sturdy product.
If installed as is, it will resonate with the Frame and cause it to chatter.
So, I put a hard sponge tape on the Frame contact surface.
There is also a hole on the underside for Oilfor Replacement, so you don't have to remove it every time you change the oil.
View detail
Sturdy and simple design.
[How is it used?
When I switched from a SEROW225W to a used and reasonably priced SEROW250 a few years ago, I purchased these parts for mountain fun.
The Under Guard, which was standard equipment in the SEROW225 era, has become an option. After comparing Y's Gear and ZETA products, we chose this product, which is simple in form and seems to be easy to fix the board gold even in the event of a dent.
Was the one you received as per Image?
It is made of thicker aluminum than expected, and its sturdy construction betrayed me in a good way.
The product was more than Image.
Was the installation difficult?
Included Bolt & Washer4Quantity:The set is simply fastened to the bolt holes originally set in the SEROW250's underframe.
Installation alone takes only a few minutes.
How was your experience with it?
The guard coverage is wide and quite strong, and although it is prone to scratches, this is not a problem because that is what Under Guard is supposed to do.
I have deformed it many times in the past, but each time I correct it by hitting it with a gold hammer.
In Other People's Reviews. The reflected sound of the Engine is Large. However, with a little effort, the reflected sound can be reduced considerably.
[Included Parts:were they on?
Under GuardBody with Bolt and Washer 4Quantity:Set included, simple and easy to understand.
[Was there anything that disappointed you?
It is not at all, and it is not as rugged and refined as those made by Y's Gear, but it is more powerful. Forest Roads & Difficult Areas Attack! It is my personal favorite design because of its feeling.
Other items that would be helpful
Point and hang of installation
As I mentioned above, I heard that the reflected sound of Engine etc. is strong, so in my case, it is sold at 100s etc. Gap Sponge tape is stretched on the inside of the guard to try to absorb reflected sound.
I installed it from the beginning when I purchased the product, so I don't know the difference before and after use, but I don't mind the reflected sound while driving, so I think it is effective. I think it is effective.
[Availability and clarity of the Instruction Manual
There is no Instruction Manual, but the name of the product tells the purpose of use, and it is hard to find a product that is easier to understand than this one. It is so easy to understand that it is hard to find a better product than this.
[Notes]
If you have replaced the pipe with an external exhaust pipe, it may interfere with the pipe depending on the type, so it may be a good idea to take countermeasures after lightly assembling the pipe temporarily in advance (it is said that the POWER BOXPipe made by SP Tadao does not interfere except for the very first lot).
[ITEMS TO BUY TOGETHER
If you are concerned about reflected sound, see above. Gap Tape made by Sponge." to try it on.
[Opinions and requests to Manufacturer
I bought a used SEROW250 that didn't have an Under Guard on it." Please continue to sell as much as possible.
View detail
Fits: SUZUKI 250SB, KAWASAKI D-TRACKER, KAWASAKI D-TRACKER X, KAWASAKI KLX250
Under Guard
Material:I had been wearing Plastic's Under Guard, but now I have more opportunities to drive on forest roads,
I purchased this Under Guard. The area to be guarded has increased from the previous one,
I am satisfied. Installation is easy.
View detail
Necessary and sufficient+.
I am satisfied with the price, the quality, and the feel of the product. I would like to have more parts that can be attached because I like the Manufacturer. View detail
Not too obvious, but good.
I purchased it at the same time as the Maintenance Stand.
There are gold and titaniumium color, but I chose titaniumium color because I didn't want to stand out in a strange way.
Installation is very easy.
I actually used it as a Stand Hook, no wobbleetc. and no problems. Of course it gets scratches, but that's normal, so I don't mind.
The price is cheap and recommendation.
View detail
It's solid.
It was able to be installed on the Side Stand without the use of a Rubber plate, which is compactly sized and can be placed in the gap.
It was easy to install
View detail