Reviews
It's harder to sink into the ground.
Purchased to make it look more rugged.
It doesn't seem to be a CT125-specific product.
Mounting Bracket slightly interferes with Side Stand
I think that thin rubber plate etc. between the two will not scratch both sides.
The larger area of STAND
It's harder to sink into the ground, so I'm less careful when parking my bike.
View detail
80mm for MOTARD in WR
I put it on my WR250R MOTARD, but the height of the STANDIncluded Tip is too low and the motorcycle falls over a lot. It would have been better if the height of the tip could be selected in STANDIncluded Parts:. View detail
I'm satisfied
With its large area, the motorcycle can be stably erected. I didn't know how to use the two rubbers in the components, but I used only one of them. View detail
Forged aluminum is very high strength
It's just STAND, so the only change is that it makes me feel a little better. I put it on my WR250R MOTARD, but the attached tip is too low, so I bought a 55mm tip from Option Parts and use it. I bought a 55mm tip from Option Parts because I didn't want the motorcycle to fall down too much. It would have been better if I could choose the tip height. View detail
Fits: SUZUKI V-STROM 1050XT, SUZUKI V-STROM 1050, SUZUKI V-STROM 1000XT, SUZUKI V-STROM 1000, SUZUKI V-STROM 250
Cospar good
The inexpensive but solidly made unit is secured with a Screw lock after applying Strong Double-sided Tape.
So far it has been working normally with no rattling or loosening.
I know there are individual differences, but in the case of my Motorcycle, it rubs lightly on the Center Stand when the Side Stand is stowed.
View detail
Round and round and round and round … I was in danger of dropping out.
The ReplacementTip (the part that lands on the ground) came loose right away, even though I tightened it! 。 A friend of mine installed it on his new CRF250L vehicle, but it was loose.
I stopped using Bolt of Included Parts:, changed to slightly longer Bolt, inserted Flat Washer→Spring washer→Flat Washer, and tightened it with Bolt, and it did not loosen.
View detail
Increased stability
The OEM Side Stand also has a larger ground clearance than the JA55, but we installed it to make it more stable. It is easy to install, just fasten two Bolts and it does not interfere with the Chain.
If I had my way, I would like to have colors other than Silver.
View detail
STAND adjustment to match vehicle height
[How is it used?
When we installed the HighLink Plate, the car body tilted too much when stopping, so we purchased this product with an adjustment mechanism.
Was the one you received as per Image?
At the time of purchase This price is high for one STAND." But when I saw the product I received, I thought Well, I guess it's just too expensive." I've settled on the impression that the product is just like Image, though I still think it's expensive.
Was the installation difficult?
It seems to be screwed off at the lower 1/3 of the STAND and can be replaced with an attachment of a different length.
At first, I did not understand the system and thought that the length of the STAND was adjusted by loosening or tightening the screw.
How was your experience with it?
I wonder if it works well with the products made by DRC (both Large books are DirtFreak). The car body, which was too lean and uneasy in the Normal stand, is now as lean as in the Normal stand, and I feel more secure.
And STAND itself. "Forged" The product was not a product of the "I am a good person," but a high-quality looking product that was satisfactory enough.
[Included Parts:were they on?
This is the only product.
[Was there anything that disappointed you?
The functions and appearance of the product are sufficient, but it would be appreciated if the appearance and Material could be changed to a less expensive Material at a more affordable price (I can't repurchase the product if it is released after purchase...).
Other items that would be helpful
Point and hang of installation
Read the Instruction Manual properly and understand how to attach it before attempting to do so.
[Availability and clarity of the Instruction Manual
The Instruction Manual is included in the package and is easy to understand and illustrated.
To avoid being like me, read the Instruction Manual thoroughly before proceeding with the installation.
[Notes]
If you install it on a vehicle that has not been converted to high lift, of course the vehicle body will stand up too much and it will be unstable when stopping (although ShortAttachment will solve this problem). STAND for high lift measures." and should be used with the understanding that
The overall length of the NORMAL ratio is about 25mm longer. Conversely, the Short Type, which is 25mm shorter in overall length, is also available, so be careful not to make a mistake when purchasing.
[ITEMS TO BUY TOGETHER
Install STAND Spring Spring hook." If you can afford it, it may be a good idea to purchase the products at the same time.
[Opinions and requests to Manufacturer
As I mentioned above, please use inexpensive materials and reasonable pricing while keeping the same functionality.
View detail
Exactly for klx250 OEM ride height
[How is it used?
I purchased this product because I need this product to install the following forged AluminumKick Stand on my OEM ride height KLX250.
https://www.webike.net/sd/23952653/
Was the installation difficult?
Simply remove and install the Bolt1 pc.
Note that the Socket will not fit in the hole unless the outer diameter of the Socket is small.
How was your experience with it?
It worked fine
View detail
OEM is getting bald and bald and needs to be replaced.
[How is it used?
Installed on KLX250 OEM ride height.
The tips are too short to install at OEM ride height, so we replaced them with ↓'s 105mm Option tips.
https://www.webike.net/sd/23908023/
Was the installation difficult?
Easy installation using only common tools.
Remove the Side Stand, so if you have a Maintenance Stand or a Motorcycle stand, use the Large sturdy stand.
How was your experience with it?
Refreshing because the OEM was bald and bald.
I feel good about it because I think it has reduced the weight somewhat.
View detail
For STAND use
[How is it used?
Purchased for use with rear stand
Was the one you received as per Image?
Yes
Was the installation difficult?
Very easy. Installed with Screw lock agent.
How was your experience with it?
good
[Included Parts:were they on?
None in particular (Body and mounting Screw only)
[Was there anything that disappointed you?
nothing in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It is a small part, but the texture is good and it is not too conspicuous.
I think it would be better if the diameter of the body side is a little larger to reduce the possibility of the attachment of the STAND touching the swing arm.
Also, it would be better if there were several color options.
View detail
I would prefer 15mm instead of 25mm. Let's do something about it.
Side Stand problem of CRFRALLY50. The side stand is so strong that it seems to topple over at a slight incline or in the wind, and many owners dream of a short stand. So, they bought ZETA's Short Stand, which is actually too short because it is 25mm shorter. So, I decided to buy a ZETA Short Stand. Set color SC1510S The material is stainless steel, so there is no problem with the color and etc. even if it is combined with ZETASTAND. The STAND itself is locked in length with an 8mm di− socket and screw lock. If you have a tool called "Spring hook", you can install the spring by pulling the spring by force without any difficulty. If you fail and the spring hits your body (face, eye, etc.), you may get a little injured. If you are going to do motorcycle maintenance, as with anything else, I recommend that you get a dedicated tool. is very satisfactory, including the appearance. However, the price is...(^ω^)........ View detail
ZETA Zita ED Skid plate
[How is it used?
Was the one you received as per Image? Street Image
How was your experience with it? Strength.
[Points to note] The minimum vehicle height is lowered by the Frame plate.
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
KDX250SRShort Stand conversion
Since KDX250SR was converted to MOTARD, the OEMSide Stand is too much for the body, so it was converted to Short Stand.
Material:Texture improvement with Aluminum!
I give it 4 stars because the price is reasonably high.
View detail
Lightweight
I installed it on my lowered KLX230R using ZETA's Lowdown Link, and I used the NORMAL Side Stand for a while after lowdown, but when the grease ran out and the ups and downs started to get tepid, I replaced it with this ZETA for Lowdown STAND. I replaced it with STAND for Lowdown.
Installation can be done by floating the car body on the Maintenance Stand, removing the STAND spring with a spring hook wrench, and loosening the Bolt, so it can essentially be replaced immediately.
However, the mounting position of the spring hook that was installed at the time of purchase does not match, and it is necessary to change to a different hole.
This hook is fixed to the screw hole, but since it has a screw lock agent and can only be removed with an 8mm open end wrench, it is frustratingly difficult to remove.
The Tip at the tip of the STAND also needs to be fixed by preparing the Screw Lock agent by yourself, so I was hoping that this Hook could also be installed as a separate component from the beginning in any position you want.
If the ground is soft, such as sand, the motorcycle will lie on the ground, so a block or stand is necessary.
The STAND itself is lighter and looks better than the NORMAL, so it is a much better parenthesis than the NORMAL as a side stand.
View detail
ZETA Side StandExtender
The price is a little high, but it is easy to install because all you have to do is insert the bolt and tighten the bolt. The ground contact area of the STAND has been widened, so I think it is more stable in places with poor footing, etc. View detail
It can stand safely even on slopes and undulations.
As shown in the Title and Product Spec., the STAND will be shorter, so the length will be appropriate for the lowered vehicle body, and it will be more stable when the vehicle is stopped.
It would be great if Short Stand could be incorporated into LowdownPackage and released by Manufacturer.
Naturally, the ground contact area is the same as OEM etc., so it will be buried in soft ground such as soil at camping sites or on forest roads.
Since the company manufactures STANDExtender, it would be great if there is an Extender that fits this Kick Stand Tip.
It is not a bad thing and can be recommended for those who have low LINKs to lower.
View detail
Fits: KAWASAKI KLX230, KAWASAKI KLX230S, KAWASAKI KLX230R, KAWASAKI KLX230R S
The construction is very careful and solid Guard, but there is interference with the exhaust pipe.
[How is it used?
OffRoad course driving
Was the one you received as per Image?
Lighter than expected.
Was the installation difficult?
The exhaust pipe interferes a little with the bolt. Also, the two front bolts and one rear bolt are positioned too tight, so be careful not to turn the bolt too far because the screws may be damaged if the bolt is not rotated.
How was your experience with it?
Large sturdy enough to climb over rocks and logs.
The fixed Bolt is designed to prevent the head from popping out.
Oil replacement is possible, but it is easier to remove the oil filter for oil filter replacement.
[Was there anything that disappointed you?
None except interference with Exhaust pipe.
[Opinions and requests to Manufacturer
Please fix the interference Point with Exhaust pipe.
View detail
ZETA Zita Enduro Sucido Plate installation
It's well made and Covers the sides, so it feels secure. View detail
Fits: HONDA CRF250M, HONDA CRF250L, HONDA CRF250L Type LD
Protect before receiving Damage
I bought it because I want to go Off.
Installation is easy once the Bolt on the Mount is removed.
As you can see from the other reviews, the bolt was very torqued up, so I had a hard time removing it.
SRC seems to have Rubber attached where the Frame hits, but Zeta doesn't come with it. I purchased a similar one from Home center and
I pasted it, I saw in Review that SRC interferes with PowerBox, so I went with Zeta.
The Engine sound seems to reflect and is a bit noisy. I think that if there is a hole at the bottom, the sound would escape and the weight would be reduced, but I wonder if it would lower the protection power.
Instruction Manual was attached.
View detail