Reviews
Buy.
If you fall often, be sure to put it on!
All the Motorcycles in my house have them.
I've never broken Clutch or Brake.
View detail
![[Replacement] Pivot Perch FP / Bolt Set](https://img.webike-cdn.net/catalogue/11329/ZE43-9399_TS.jpg)
I appreciate the Large change to get Repair.
Some Zita products have soft screws that are easy to lick, but since it is difficult to replace the Bolt with a home center or similar product, I am thankful that a large replacement product is available. View detail
I would recommend these to anyone with a KX
I got so sick of having to straighten my bars out after each little tip-over I took. KXs like mine are notorious for having that issue. These cool bushings solved that problem. The bars are always straight now. Also, I honestly cant tell a difference in the level of vibration with these compared to the stock rubber ones. View detail
Repair Parts is available ◎
[How is it used?
Pivot Perch FP/3-fingers Clutch Lever Holder Set (https://www.webike.net/sd/9694961/) I have been using this one for a long time (8 years?), even after switching Machines and transferring it. I have been using it for a long time (8 years?).
It is equipped with a Nylon sleeve that rotates to release the impact when it falls over, which is why it has been in use for 8 years without damage.
I bought this product because the Nylon sleeve was cracked when I removed it to replace the handlebar the other day.
Was the one you received as per Image?
It arrived in a decent PACKAGE. Also, WeBig has its own additional images of the products, which made me feel comfortable with the purchase.
Was the installation difficult?
Just put it in the Clamp section as if it were new.
How was your experience with it?
Even if the bolt is tightened with enough torque to prevent the bolt from coming off, it will still turn if some force is applied.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
ZETA's Clutch perch is a bit expensive, but I think it is worth choosing because Repair Parts are available in this way.
View detail
go around moderately
[How is it used?
I usually compete in Enduro races, and I have been tightening the brake master and lever just right because breakage of the brake master and lever can lead to DNF. If they were tightened solidly, there would be no place to escape from the force of the fall and they would break.
It is a Torque that does not break, but it tightens to the extent that it moves Limit if you lack strength by hand. Sometimes it is very loose, and if you mess it up, the Bolt can get lost.
This product can be fixed by inserting Nylon or some other material so that it will not slip even when well tightened.
Was the one you received as per Image?
As shown in the image. The surface is a little rough. It is natural because it is written "Sand Blast Finishing".
Was the installation difficult?
Simply replace the OEM Clamp. It should fit most Brake Clutch MASTER Clamps since it has a slightly longer hole.
How was your experience with it?
I used to do TorqueCheck before races and practice, but now I don't have to do it anymore. I should have bought it earlier.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
ACERBIS:ACERBIS TRI FIT Hand Guard (https://www.webike.net/sd/21204398/) This is also Torque enough to turn when force is applied, and if the bolt is tightened, the entire MASTER will turn around so that it will not be damaged. It will not be damaged. This is a recommendation as a hand guard to be used in combination with the MASTER.
View detail
![[Replacement] Pivot Perch FP / Bolt Set](https://global.webike-cdn.net/uiu/impression/202209/19_1022257_63280175d7e1f.jpg)
Zeta replacement bolt set
Zeta replacement bolt set for pivot perch replaced, the feeling was good like new! Not difficult to install, easy as ABC. View detail
Great OEM replacement
Solid replacement to OEM. These provide visible cushioning that is felt while riding. The material is also not chewable. It is very sturdy and stylish. Looks beautiful. The shipping of webike arrived in 10 days, incredibly fast. Beautifully packaged. View detail
Qualtiy Clamp
Out from the box and installed it at my Honda CRF300l. Fits perfectly both sides (brake and clutch) and the plastic clamp serves its purpose not to scratch my new handlebar. Great item to enhance your bike cosmetically. View detail
![[Replacement] Pivot Lever FP / Mounting Set For Clutch](https://global.webike-cdn.net/photo/impression/1c/1c8c91360d595979048a3a3fd359b847L.jpg)
Thank God for Repair Parts.
[How is it used?
I bought this part because I found it at home somewhere.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Just install it where it's missing, put the Spring firmly in the hooking hole, and tighten the Bolt.
How was your experience with it?
It's back to normal, no plop, and it's coming back after falling in a forward direction.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly. Unlike other Manufacturers, it's helpful to have these Replace parts available.
Other items that would be helpful
Recommendations are made frequently to avoid dropping them as I did.
It was more difficult to ride than I expected when the clutch lever plucked during the race … lol
View detail
Lever breakage prevention
When it falls, the resin is Quantity in the clamp part to prevent Lever from breaking.:It is set so that it rotates when strong force is applied.
This is a very important part for off-road motorcycle riders like myself who often fall down.
The Lever has already been made into the PivotLever of ZETA, but this Clamp and Quantity:I thought it would be more effective to use it in a Set.
It's not that it wobbles, but it mounts securely, so the lever position didn't shift when driving.
View detail
Improved rigidity
I bought it to be able to buy a variety of Position.
This is also useful if you want to use one unit with Large people and children.
In terms of price, I think it could be a bit cheaper.
I use it with ZETA's Stem Kit.
View detail
It looks strong.
I bought it so that I can change the position between the child's ride and the Large person's ride.
I've already replaced it with a ZETA Stem, so
It's also very consistent.
I haven't put it on yet.
It's about 2 cm up.
Maybe the Wire will be tighter to deal with.
View detail
Used for free rides!
I bought it because my free ride hand guard of KTM, which I enjoy off-road, was broken. It has a high degree of freedom and I was able to install the Hand guard of other brands. I'm happy with the way it's fixed and secure. View detail
Increases the Universality of Mounting Parts
hand protection like the recent Cruiser and RALLY50 cars, as well as long hours of use I installed it to make Riding comfortable
When I tried to install my ZETAHand guard, I applied it to the Radial I installed it because I can't install both Brake and Clutch due to the harm of installing master
The Bar End was installed with a slight twist, which bothered me a little I put it on to avoid Harness interference and got an acceptable angle! 。
View detail
I think that it is easy to use
In the case of klx125, since Handlebar struggles to adjust and reposit many times to bend from the Rubber part from the attachment part due to overturning, we purchased it to solve with this product, but due to our convenience Not installed - - According to the attached review, vibration is transmitted to Handlebar as brittle - - - I am planning to write it again after installation - - - I think that it is personally good. View detail
With Impact
Since it was good except for installation on DJEBEL, it is also mounted on RMX. Next time I bought DRC's ColorBolt together.
I am concerned about fading because the color is Red. Besides ZETA 's Red fades quickly but Red can not be helped.
Since some of Mounting Bolt is offset, it can not be used, so I wish to release it even if it is offset difference.
View detail
ZETA Rubber killer
I bought ZE37-0321Red for KLX 125.
Since KLX 125 is a Rubber mount and it has a Bar rise kit 30 mm, it gets twisted merely by lightly mossing, so I installed it.
I did not twist easily as I intended.
Direct feeling also comes out and I do not mind the vibration.
KLX 125 could not be installed on the bottom unless you take the Top Bridge.
View detail
Exchange around Handlebar
Handlebar Clamp bent and it felt strange to Handling, so I bought it along with the exchange around Handlebar.
It is exchanging only at the upper part, but I like Snap and Handling and I like it. I do not mind being so much concerned because I got together with the Pro grip. Anodized Red is one point and the Custom feeling has improved sharply. It changed to DRC's Short lever, so it looks better also Parenthesis better.
View detail
I had PROTEPER SE bar handle Carmichaerl model and a bend type hand guard. This combination of standard size still installable. However, if I adjust to my best position, the master cylinder bolt interferes. I was not happy about the position and have been
I had PROTEPER SE bar handle Carmichaerl model and a bend type hand guard. This combination of standard size still installable. However, if I adjust to my best position, the master cylinder bolt interferes. I was not happy about the position and have been patient to use for a while, but enough! I decided to get new one. The installation is easy just exchange the mounting. However, the hand guard need to be modified a bit to make the installation easier.
Its curve need to be more opened. Of course it can't be done by hands, so I used a street ditch to bend it.
I put the hand guard and some protector cloths into the ditch hole then push-push. Actual change is not much, but it creates enough clearance to the extended portion.
I am more than satisfied! Finally I can ride with my best position. In addition I changed the clutch side too although it didn't have problems with standard size.
View detail
This bar clamp is awesome. It wards off the impact you get when you fall and rotate.I fell two times to the left and three times to the right, but thanks to this bar clamp, my motorcycle hasn't been seriously damaged nor distorted.Normally it does
This bar clamp is awesome. It wards off the impact you get when you fall and rotate.
I fell two times to the left and three times to the right, but thanks to this bar clamp, my motorcycle hasn't been seriously damaged nor distorted.
Normally it doesn't move even if you press it hard, but it rotates when it comes under great pressure.
You need to be careful not to overtighten the bolt when installing, but it's not that difficult. (I'm using a DRC aluminum bolt, the one shown in the picture.)
The surface finishing of this red anodized aluminum rotating bar clamp has a high-class feeling and beautiful.
It is a customizing item that serves not only as an decoration but also as a protection part which rotates in case of falling. It's worth buying.
I am using this bar clamp for my right handle.
There's another product for the left: ZETA Rotating Bar Clamp (with Mirror Hole: ZE40-9412).
It isn't that expensive. If you don't have one, you might regret in case you fall and damage your lever. It will serve as an insurance against accidents.
This ZETA product has beautiful anodized finishing, and unlike ones of other brands it restores its color better. It is a reliable product.
I will post five stars (full score) for this bar clamp without any question.
It is great, for it can be a practical insurance as well as a stylish decoration. It is easy to install and above all, it has comparatively reasonable price!
View detail