Reviews
I am satisfied
I installed it on the OEMHandlebar
One size fits all, but I'm not sure what to expect
I'm glad this size doesn't interfere with the Axel operation, Dress-up's One I'm happy with it as a point
View detail
Back from Touring..
So far I haven't had any problems with it, according to the Amazon comments section it comes off easily But it may be about using it on forest roads and off-road, but I'm not sure if it's for normal road driving It seems to be Large sturdy if it's around W
The Bar End of NORMAL is insistent in the case of CROSS CUB, can't you do something about it? I've always thought that W. This will help me with Slim
View detail
I am satisfied with the qualities of texture
It attached to CB 125 R. OEM quite like Specular protrusion of OEM. is.
I replaced it in conjunction with the Grip exchange, but I think that the color of Anodized is clean and Motorcycle's rating rose a little
View detail
Securely attached and secure.
I bought it for attaching Bar End for M6Screw of Babyface to XJR 1300 of the outside Handlebar. PlugSingle Item's items are for M8Screw so be careful. I failed and made a wasteful expenses (; ^ _ ^ A
It can be attached more securely than the one of Rubber Bush so it is safe.
View detail
Higher but there is consistency with Handlebar
It is self-satisfying because it is an inconspicuous Parts.
Size can be chosen to suit your preference.
From the price of Handlebar it is only Bar End but high.
View detail
Necessary for excellent outstandingness Small limit self-assertion exactly good Protection
I bought it as a Protector around Handlebar when driving MOTARDCourse. Since MOTARDCourse has no deep Bush running different from Motocross and Enduro, Hand guard and Lever Guard are too flashy and not usable from the viewpoint of weight saving, so we chose this Parts.
It is unknown how much Protection effect it has since it is not falling but it seems that it will not be unable to run at least because it hurt Grip and ThrottleInner, so it is 100 points.
View detail
Anything
I bought this item.
I arrived at hand, I went mounting without any sense of incompatibility...
That's incongruous.
Bolt is surely a new item was Stainless, is not it? Product images are also stainless... "* The shown image is only for reference. It may differ from the actual product. Is not it terrible?
Bolt of the thing that arrived was a thing that was Chrome plated.
Oh, sorry.
So I made this evaluation as a whole.
View detail
Fits: HONDA 400X, HONDA CBR250R (2011-), HONDA CB400F, HONDA CB1300 SF, HONDA VFR1200F, HONDA CBR1000RR, HONDA CB1100, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB1000R, HONDA VFR800, HONDA NC700X, HONDA CBR600RR, HONDA CBR500R, HONDA CB500F, HONDA CBR400R (2013-), HONDA CB500X, HONDA CB400SF, HONDA CBR500R, HONDA CB500X, HONDA CB500F
Focus on appearance
In accordance with the exchange of Handlebar Grip, I also bought Bar End and installed it. With attached Color and Handlebar (OEM) The compatibility with the mounting part on the side is poor, and the cutouts do not mesh with each other. It is recommended to install Screw Lock on the supplied Bolt. View detail
Fits: HONDA 400X, HONDA CBR250R (2011-), HONDA CB400F, HONDA CB1300 SF, HONDA VFR1200F, HONDA CBR1000RR, HONDA CB1100, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CB1000R, HONDA VFR800, HONDA NC700X, HONDA CBR600RR, HONDA CBR500R, HONDA CB500F, HONDA CBR400R (2013-), HONDA CB500X, HONDA CB400SF, HONDA CBR500R, HONDA CB500X, HONDA CB500F
Focus on appearance
Bar End was also purchased and installed along with the exchange of Handlebar Grip. I bought it for CBR 1100 XX because it was incompatible with the included Color, but it was a feeling, but it felt somewhat difficult to install. It is recommended to apply Screw Lock to the supplied Mounting Bolt. Other than that there is no problem but ... View detail
There is enough presence in Simple
I dated up MinimotoKSRPRO with ZETABar end plug!
Although it is a personal impression, it is a relatively simple design, but it is not conspicuous as expected, has a solid presence and is Large satisfied!
The thing that I used until now was the type that tightened Bolt and inflated the RubberDamper and it may be only for me, but I can not install it with Well by all means, so as to solve the problem this time Zeta Zeta Bar I replaced it with an end plug.
The ZETABar end plug has an inner diameter of 13. With the product corresponding to Handlebar of 5mm to 19mm, the Bar End's Size has a 35mmType that widely protects the Grip end and 29mmType with less sense of incompatibility even when grasping the end part, but since it is attached to MinimotoKSRPRO, 29mmType with exact Size feeling Choice.
Color got lost in various ways but avoid choosing the standard color and choosing a bit awful Titanium color.
Installation on Handlebar is easy and sure!
First, choose the plug that fits the inside diameter of Handlebar.
Next, through the Bolt to the End ring bar, Material : Combine Aluminum's Plug and TaperNut. (PlasticRing is attached to * Throttle side)
Then plug it into the Handlebar and tighten the Bolt with a 4 mm Hexagonal Wrench.
Then, the tip of the Plug spreads, the Knurl-processed tip surely holds the inside of the Handlebar and the kitchen is completely installed!
The product is very lightweight, the end part uses 6061 - t 6 Aluminum with strong strength, it is very beautiful treated with Color Anodized Aluminum processing!
Throttle operation is also Smooth!
Thanks to the ZETABar end plug, there is no worry of dropping out while driving, so I am able to run very comfortably!
By the way, the attached Handlebar is EFFEX EZ - FIT BAR [EFFEXEZ-FIT Bar] , Handlebar inner diameter is 14?.
View detail
Thanks for selling as parts
Because it is a hexagonal head with Aluminum, I will lick immediately as I insert the Wrench tightly and do not tighten it.
Bolt will bend soon by falling.
I want a little strength.
I wish I could have sold only Bolt
Still, the hand guard of ZETA which is easy to get the parts is probably the best.
View detail
Tipping over, Bolt bent, so purchase
When falling, Hand guard Body did not have much damper,
Bolt only bent, so I bought this item.
When I bought it in second hand, because I had a hand guard, I got lost a little about how to attach it,
I was able to attach it safely. I remember that there was no Instruction Manual.
View detail
Fits: YAMAHA MT-25, YAMAHA MT-03, YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA FZ8, YAMAHA YZF-R1, YAMAHA FJR1300, YAMAHA V-MAX, YAMAHA YZF-R3, YAMAHA MT03
heavy
With the change of Handlebar Bar End also unified by the same Manufacturer
Coloring chose Gold according to the parts of Others
The intermediate weight is heavier than I imagined, and the same Gram number as Lever Guard purchased at the same time is a difficult point
Even without Weight, there was no problem on running, so there is no intermediate weight
The appearance will also improve
View detail
Only Bolt, I want you to join us.
Used for wr 250r. When I came back from the forest road there was no Bolt.
It is better to retighten.
I am not ordinary Bolt, so I got caught.
It was nice to purchase.
I wish I could sell bulk items.
View detail
To Accent
Instead of protecting Bar End and Grip, I bought it for Accent around Handlebar. I purchased Anodized Color, but texture was also good. Installation is particularly easy without difficulties. View detail
In for Repair
For those who fall aside with Trekking it is essential Items' ZETAHand guard.
Bolt of Bar End was shaved while using, so I exchanged it.
It is fixed in Hexagonal Wrench, but mud and earth get into this Bolt hole
There are things often.
When detaching in maintenance, it is attention that it will be easy to make a snake unless you well clean the hole.
View detail
ZETA Zeta Bar End Adapter
I have attached ZETA's Hand guard to WR 250X, but when I saw suddenly, only the end portion was gone. I do not remember dropping after wearing, so it seems I went loose and flew by vibration.
It is appreciated to be able to buy it individually, but I think that it will be a little cheaper.
Tighten regularly regularly.
View detail
Protection and Dress-up
I am using it for Yamaha's original two kinds off-road motorcycle, XTZ 125.
The Grip end of XTZ 125 is a Non-Penetrating formula, of the type whose Grip's Rubber covers the end part as it is. Therefore, if a branch interferes with the end of Grip due to running along a forest road or the like, Axel is forcibly turned, or Axel gets hard to return. It is extremely small possibility, but it is still a phenomenon that happens occasionally. So I bought a Bar end plug to protect the end part.
I will explain the structure of this Bar end plug together with the attached image. Tightening Bolt from the direction of Pink color, the Knurl processed part spreads in the direction of Green color. This Knurl process part is fixed by digging into the inside of Handlebar.
In the actual work, in the case of XTZ 125, it starts from the processing of the end of the Grip end. Cutter etc. cut out the Rubber at the end part into a circle of Large size through which this product goes, then insert Bar end plug and tighten the work. At this time, it is good to tighten in advance to some extent and spread the Knurl processed part. Since it can not be tightened without getting caught, the work will proceed easily by spreading it according to the inner diameter of Handlebar. Also, on the Axel side, there is something like a transparent Washer attached so as not to disturb the rotation of the Grip, but if you overconfidently confine it and tighten it, Axel will not move. So, I think that it is better to fix this place at a position with a margin rather than closely attaching it here.
I do not feel anything like a negative aspect by installation. I think that it is a good product that will complement the protection functionality and the apparent Dress-up. And usually Bar End has its own width and has a shape that protrudes out, but since it is made very thin, I do not want to have an off-road motorcycle with a wide Handlebar width, or a less prominent Bar End It is very good for people.
View detail
It protects you..
Transfer etc.. Because it got scratched by it and it looks bad it changed it.
Only this Parts was scraped and we are satisfied because it protected others. It's a simple Dress-up parts, but if you do not put it on, it's Large different Parts. But it is not so cheap that impossible is impossible.
I will discipline this and I would like to make it a big thing.
View detail
About two years
I used it for Motocrosser.
Because it is a stubborn thief, it was rolling and breaking the Grip.
Well it is together now that it is together, but since we added this product, the time to exchange Grip has increased.
Just found out that the plug of Left Side is gone!
Is it due to having been riding without tightening up Screw for about two years?
I will be careful next time.
View detail