Reviews
Interference with clutch lever
[How is it used?
Daily use such as commuting
Was the one you received as per Image?
Not on Image Street.
Was the installation difficult?
Difficult.
How was your experience with it?
Grip slips.
[Included Parts:were they on?
Already included.
[Was there anything that disappointed you?
It was mentioned that the Small diameter was used to reduce interference with Lever,
Interference was found. close to the Switch box up to Limit,
I used a curved Clutch lever and it interfered with the Flange.
Flange diameter of this product:Φ57mm
OEM Product Flange Diameter:Φ44mm (measured with Caliper)
This will cause interference.
View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
The pictures are confusing.
I bought this for use on a 2023 SV650.
It's my fault for not checking carefully, but I saw two Levers in the sample product photo, so I decided to order a Quantity:Pair (for Left and Right) Quantity:I bought it thinking it was Pair.
When it arrives, it is only Brake lever.
I had no choice but to purchase an additional Clutch, but since it was not sold for the SV 650, I had no choice but to return it.
The product itself had a good texture, but the sample photos were confusing.
View detail
Change from XC Protector
This is a change from XC Protector.
XC Protector cracks every time it falls, totaling 3Quantity:I bought a new Set.
I am trying this one because it cracks too quickly, but it also cracked too quickly.
I would like you to use more sticky Plastic because it is Protector.
View detail
Screw holes did not fit.
I bought this for my GSX-S1000GT because it is a Universal Product, but the hole pitch did not fit.
It looks like it could be used if shaved, but I don't know if it doesn't fit because it is a Taper Bar, but I would recommend checking the fit before purchasing.
View detail
Difficult to install.
Unfortunately, it is difficult to install on the DL1000 V-STROM800.
I've been saved a lot by SEROW, so I have excellent credit.
View detail
SEA BASS SV650 Cannot be installed.
I bought this to install on my SV650, but it did not attach.
This product is available in two Handlebar thicknesses:Large and Small.
The handlebar on the SV650 uses the larger one for the steel handle, but the inside diameter is a limit.
There is a small projection inside the handlebar of the SV650, which prevents the bar end from going in.
I think I can do it by eliminating the protrusions inside the handlebar by putting a file on it or something, but ….
I tried the smallest one for aluminum handlebar, but it is too small and cannot be fixed at all.
I couldn't install it, so I'm giving it a 3 for texture etc.
View detail
One-time use, disposable Guard.:I should have bought Aluminum.
I put it on my en Duro bike. This is the first touring after the installation,
Damage that falls to the Right Side while standing in Side Stand on gravel and receives an apparent Shock.
Later that day a second fall to the Right Side cracked the Guard on the end side.
You should not buy this.
Even if the fall is not serious, it will look bad because it will be cracked.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(s), HONDA CRF250RALLY, HONDA CRF250RALLY(s)
Large Strong?
Bent by a standing bender, the Brake lever was damaged.
It is sad.
View detail
Large Strong?
It is a comfort. Even standing still is not enough. View detail
Fits: HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRF450X, HONDA CRF150F, HONDA CRF230F, SUZUKI RM125, SUZUKI RM250, GASGAS XC300, GASGAS XC250, GASGAS XC200, GASGAS EC 2T, GASGAS EC 4T, GASGAS FSE, GASGAS FSR, BETA X-TRAINER, BETA RS 4T, BETA RR 4T, BETA RR 2T, HONDA CRF250F
Shipped?
Why can't Tracking be done even though it has been shipped? See another image:?? View detail
Fits: HONDA CRF250R, HONDA CRF250X, HONDA CRF450R, HONDA CRF450X, HONDA CRF150F, HONDA CRF230F, SUZUKI RM125, SUZUKI RM250, GASGAS XC300, GASGAS XC250, GASGAS XC200, GASGAS EC 2T, GASGAS EC 4T, GASGAS FSE, GASGAS FSR, BETA X-TRAINER, BETA RS 4T, BETA RR 4T, BETA RR 2T, HONDA CRF250F
Shipping is slow.
Shipping is slow! It says it ships today.
I didn't ship it.
View detail
Good stuff, but webike is Garbage
The product itself was good, but the bag arrived torn to shreds.
Products rubbed against each other and covered with Small scratches.
View detail
Fits: KAWASAKI KLX125, KAWASAKI KLX150, KAWASAKI KX250F, KAWASAKI KX450F, KAWASAKI KLX250, KAWASAKI D tracker, SUZUKI 250SB, KAWASAKI D-TRACKER-X, KAWASAKI D Tracker 125
Length does not match with ZETA Grip either.
I bought this together with a 97 KLX250es to transplant the Throttle area from a Second Type Model KLX250 to test it out since WeBig had it in stock.
I also purchased ZETA's Slim grip, but the Inner Throttle has an odd shape, it is abnormally far from the Throttle Box and the length does not match the grip of the company's brand.
Very unpleasant and uncool.
Without hesitation, I ordered an Inner Throttle and Grip set for a KawasakiOEMSecond Type ModelKLX250.
If it had been open end, I would still have used it, but I want to ride closed end, so I will never choose a closed end zeta product again.
View detail
Deterioration makes it sticky and messy.
This Grip is easy to replace and comfortable to grip, but I feel it gets sticky quickly due to deterioration (it deteriorated after about 2 months).
It was too sticky and uncomfortable, so I replaced it with a Sponge type of the same series.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R1S, YAMAHA YZF-R6, YAMAHA MT-09
MT−09 SP 2022MODEL does not have a clutch lever
MT−09 SP 2022MODEL does not have a clutch lever.
The clutch lever itself attaches, but does not hit the clutch switch.
MT−09 SP's should quit buying.
I can't return it because I installed it, and I lost almost 2,000 yen.
U Kanaya is better. COSPA is the best
View detail
Damage to item finish
There was as issue with the finish on this lever, so it is only getting one star. The machining was fine, but there was a mark on the anodising on the top section of the lever, so very visable if used. The quality of ZETA 's products is normally very good, but now made in China I am seeing problems, which is a shame. 5 stars given to the support team at Webike for sorting the problem out quickly... View detail
Fits: HONDA CB1000SF, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA VFR1200X, HONDA VFR800, HONDA VTR1000F, HONDA X-4, HONDA CBR600F4, HONDA CBR600F4I, HONDA CBR900RR, HONDA VTR, HONDA VFR800F, HONDA VFR800X, HONDA RVF400, HONDA NSR250R, HONDA HORNET900, HONDA HORNET600, HONDA HORNET250, HONDA DN-01
I ordered the purchased product as a set, but only one on the right came and I am dissatisfied.
Your purchase has arrived.
In the product description, I bought it as a set on the left and right, but only one lever on the right was delivered. Here is the seller's description.
The description of the seller has been explained so that both are present. See the z61-1435 sales article...
However, it was a disappointment because the left clutch lever, which was actually needed, was not included. ------------------------------------------------------------ -------- Purchased products have arrived.
The product notation description came out with a set of left and right, but only one right lever was shipped. The seller description is coming.
The seller description has been explained. Z61-1435 Sell posts...
But the left cluter Chireber was not included. Powered by Google Translator
View detail
Fits: HONDA CBR600RR, HONDA CBR1000RR, HONDA CBR1000RR-R, HONDA HAWK11, HONDA CBR600RR(USA), HONDA CBR1000RR(USA), HONDA CB1000R
CBR600RR 2021 Non-conforming!
CBR600RR 21 Listed as compatible, but not compatible!
Brake switch is not available.
for Race is possible.
View detail
It's a one-way cancellation?
It's in stock at the warehouse and will be shipped on the 21st! But on the day of shipping, I received an email saying "Cancellation?
How is the inventory management?
My schedule got very out of whack.
View detail
Fits: KAWASAKI NINJA 250SL, KAWASAKI NINJA 250, KAWASAKI NINJA 250R, KAWASAKI NINJA 300, KAWASAKI NINJA 400, KAWASAKI Z250, KAWASAKI Z300, KAWASAKI Z400, KAWASAKI VERSYS-X250, KAWASAKI VERSYS-X250 TOURER, KAWASAKI VERSYS-X300
I can't adjust the angle, it interferes with Cowl.
When I installed it in the same position as NORMAL, it interfered with Cowl. If you can't adjust it the same way as NORMAL, don't say it fits. I have a ABSMODEL and was refused to return it, even though Customer Service says it can be installed on an ABSMODEL. The reason seems to be that the year is different. I told them that I could find out with a little research, so I am waiting for a sincere response. It's a shame because the build quality is fine. View detail