Reviews
![Sonic Handguard PC Kit [Universal]](https://img.webike-cdn.net/catalogue/images/104425/zs72_2100_TS.jpg)
Windproof effect.
[How is it used?
I installed it as one of the measures to protect my hands from the cold when riding at high speeds in the Touring.
I chose this hand guard because I didn't want to wear something too severe.
Was the one you received as per Image?
Since the handlebar is originally wider than the Image, the volume of the car is more impressive than the Image.
I like the Z One point on the bracket and the Motorcycle I ride is also a Z, so it gives a bit of a unified feel.
Was the installation difficult?
If only the bar end can be removed, it is easy since it is fastened with a Hexagon bolt.
I was supposed to buy the M8 version for KAWASAKI, but I bought the Universal version by mistake.
The supplied Bolt was not the right length, so I replaced it with another Bolt I had on hand and was able to install it without any problems.
Nevertheless, the edges of the Grip will not be trued.
How was your experience with it?
Even at high speeds, within the legal speed limit, there is no sense of losing to wind pressure.
I ran without electric heating equipment to check the effect on Single Body,
Hand guard alone does not provide complete protection from the cold, since the wind will be entrapped.
The coldness on the back of my hands due to the lack of direct wind has improved,
The combination of equipment is even more effective.
[Included Parts:were they on?
No tools are included. Instruction Manual is translated (enter here) and English version is included.
[Others]
The aperture of the Handlebar may reduce the windproofing effect at hand.
However, it is difficult to make the balance between the appearance and the size any larger.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-R1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-R1000R, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI GSX-R1000R
No complaints about Visual or feel.
The vehicle installed is “GSX-R1000R"! 。 Changed from U-KA◯AYA's Short lever.
First, the ideal length is shorter than the NORMAL lever and longer than the short lever. The short lever we had been using from the previous car had a short lever and it was difficult to control the brake, so we decided to go with a longer lever. However, I wanted something shorter than NORMAL, so I chose this one. The result was Large correct! It looks good, the adjustment range is fine, and it is easy to find the position you like!
View detail
What do you mean by "skud"?
I am using a ZETA SONICHand guard on my VST250SX, and I couldn't find any information about whether it would fit my VST250SX or not! So, I bought it with the determination to be a human pillar.
It is perfect. By the way, I bought it because I started to worry about the wind hitting my hands in winter.
I heard that it is possible to put it upside down, but this time I put the upper side in a long state.
As intended, the wind protection is much better against wind.
Personally, I thought it would have been even better if there had been glossy black and mud colors.
View detail
Bar End replacement along with Handlebar replacement
Originally, M6Type was used like the 2021 MT-09SPOEMHandlebar, but since it was replaced with Made by HURRICANESwallow handle, the Bar End was changed to this Universal Type.
Quantity because two Parts were shown in the image.:Pair (for Left and Right) I mistakenly thought it was an item and added another quantity at a later date.:1 Set purchased.
*The Adapter in the image was an Adapter with a different Handlebar inner diameter.
Made by HURRICANESwallow handle is made of iron, so the inner diameter of the handlebar is thin and I installed it using a Large Thin Adapter, but the installation of this type had a rather delicate Image, but this product is very accurate and does not wobble. This product is very precise and does not wobble and is firm.
On the other hand, the M6Type was more wobbly unless the contact surface with the OEM handlebar was machined and increased, so the higher price was only a little… understandable.
Also, it does not feel uncomfortable to use it as it is without the hand guard attached, and in summer, it may be possible to cool the fingertips without the hand guard.
View detail
Warm & Cool Custom
I bought it on the recommendation of a friend who said it was large enough to be effective for winter touring.
It looks great and reduces coldness at the tips of fingers and back of hands.
We do not expect any protection from the beginning because we are only doing on-road touring.
View detail
Fits: HONDA CRF250L, HONDA CRF250L(s), HONDA CRF250RALLY, HONDA CRF250RALLY(s)
CRF250L only!
I installed the 8BK-MD47 without any hesitation, but as I checked beforehand, the 8BK-MD47 cannot be installed with the Clutch Side's exclusive Spacer because its outer diameter is too large, so several washers are needed. Also, I did not understand what the escape of the bracket on the Brake hose side was for, as it did not seem to interfere with the hose. View detail
good
It was suitable for the end of the handle of the M6 standard and was installed appropriately with the sonic hand guard. I hope there are many hand guards using screws of various standards. I hope there is also an M12. Anyway, the delivery is coming quickly and I'm using it well. View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA V-MAX 1680, YAMAHA MT-01, KAWASAKI ZRX1200R, KAWASAKI ZRX1100, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZZR1200, KAWASAKI ZX-7R, KAWASAKI GPZ900R, KAWASAKI ZRX1200 S 97-14, KAWASAKI ZRX1200 R 97-14, KAWASAKI ZRX1100 S 97-14, KAWASAKI ZrX1200DAEG , YAMAHA XT1200ZE XTZ750 SUPERTENERE, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR1100
Replace with Brake lever
Along with the brake lever replacement, the clutch lever was also replaced.
As with the Brake lever, we are pleased with the fine-tuning capability and the texture.
I would have also appreciated a lower price.
Basically, I am satisfied.
View detail
Fits: KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI GPZ900R, KAWASAKI VERSYS1000, KAWASAKI VERSYS650, KAWASAKI Z1000, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI ZEPHER, KAWASAKI ZEPHER1100, KAWASAKI ZEPHER750, KAWASAKI ZR-7S, KAWASAKI ZRX1100, KAWASAKI ZX-11, KAWASAKI ZX-12R, KAWASAKI ZX-6R, KAWASAKI ZZR1200, SUZUKI BANDIT1200
Grip width to your liking.
NORMALLever, my fingers felt far away, so I exchanged them to place them a little closer together.
I think it is a good idea to replace the NORMAL Brake master if you continue to use it. I put the unused NORMAL lever under the Seat and used it as a spare lever.
The color is a luxurious Black, which gives it a higher quality feel and Large satisfaction.
View detail
For Lever Protection
[How is it used?
I thought it would be useful for lever protection in the event of a fall while out and about.
Windproofing is also expected.
Was the one you received as per Image?
Design is good.
Highly accurate and high quality.
Was the installation difficult?
Easy to work with good installation accuracy.
How was your experience with it?
Lever protection is not known until it is mocked up.
The windproof effect is not so good, which is not surprising since the cover area is small.
[Included Parts:were they on?
It is compatible with Aluminum and Steel handle and can be used around.
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
There are many adjustment points for the mounting angle, so I will decide as I use it.
View detail
Windproofing is quite effective.
I was wondering if it was the Handlebar Cover or the Handlebar Cover for protection from the cold,
This time we chose Hand guard.
Winter commuting (about 3°C) Grip heater at (Medium strength) When
With winter gloves, my hands are comfortable without getting numb.
Although its thermal protection performance is still not as good as the Handlebar Cover, we recommend it for those who do not want to ruin the look.
You can change the orientation between Sports and Adventure, though,
Either way, your arm will not be hit when you are tan de ing on a forest road etc.
I guess it depends on how you install it, but even if you make it Adventure, you can still use the Quantity:Pair (for Left and Right) interfere with the Blinker of or Limit.
View detail
On road model.
Introduced because my hands get cold no matter what I do when I ride on the highway at night in winter.
The original is like Offfor Vehicle, but used for Z900RS.
I chose this one because it looked relatively good and the cuffs were wide enough to make it easy to get my hands in and out.
one's feeling when wearing something
It seems to be fixed with a hand guard, but since there is none, I attached a Chinese lever guard instead to make it stick out, since the lever might be pushed by the wind if it is not there.
The Velcro for the hand guard is perforated, so it is fixed with Tie Wrap.
The sleeves are made of Neoprene for easy standing, but they get crumpled up when you put your hands in them, so I would like to see some kind of wire around the edges.
The overlapping part of the Velcro comes on top of the Switch, which is not impossible, but it is hard to operate.
The top surface is dented by wind pressure, so the area of the core should be increased in the U-shape direction.
The Brake Side was reinforced with Velcro on both sides because it was tight and unreachable due to the radial master and accelerator wire routing.
The Brake Side sticks out in front because of this, reducing the Cover area.
effect
Hands were cold even with electric heat on the highway at 0°C, but this was overcome in combination with this product.
At 0 degrees, with Single Body, it got cold even though it was mounted.
It is by far easier to put in and out than Rib type.
The core is hard to be dented by wind pressure, but bulky.
The wind resistance, ease of loading and unloading, and appearance were better than any Han Cover I've ever tried.
I think the L might be better for the Radial master, but it would be uncomfortable if it were any bigger….
It is a good product, but I would like to see a model change to improve the stiffness around the Switch and the cuffs.
View detail
I used it for a Handlebar with a thick inner diameter.
I installed it on a HUSQVARNA TE2502017 which I always use for forest road Touring.
When I changed the handlebar to an ISA one, the inner diameter of the handlebar became thicker and the handlebar guard I had been using could no longer be used. I purchased this Adapter and was able to fix the bar end without any problems.
View detail
Installed during handlebar replacement
I installed it on my HUSQVARNA TE250 2017 which I always use for forest road Touring.
This Bar End can be used for both large and small inner diameters by changing the Adapter.
I didn't like the Bar End that popped out so much, so this thin Bar End was very Balanced and just right.
View detail
It has a protection effect.
I don't like Sticker very much so I removed it.
Not too Large, not too Small, but effective.
View detail
A little different from my taste.
It's thin, so it's hard, but it's hard. And it hurts. View detail
ZETAArmourHandlebar
We have purchased ZETA for the NameValue&Style nature.
Installation was easy, even for a beginner.
As for durability, I can't evaluate it because it hasn't been used yet.
I think the Material feel is high quality.
View detail
protection against cold
I personally think Material is not good!
I installed it so that the top opens because I maneuver standing up.
It seems to protect it from branches and mud.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI VERSYS650, KAWASAKI Z650, KAWASAKI Z900, KAWASAKI Z650RS, KAWASAKI ZX-25R SE, KAWASAKI NINJA650
RightLever very good, LeftLever rattles a lot. （LeftLeverVery rattled.)
[How is it used?
I purchased this product to prevent falls at pannylon type driving events. I have never used other brand products (U-KANAYA, etc.), so I do not know how they compare. However, I have used the product for 4 months since I purchased it, and I will return it to OEMLever again to see the difference. Also, the following information is based on Z650RS as a MODEL, so I don't know the details of other models.
Was the installation difficult?
It can be installed without any particular problems. Brake replacement time is within 5 minutes and clutch replacement time is within 10 minutes.
How was your experience with it?
The cutting quality gives a sense of high quality. Also, the black color of the body tightens the image of the vehicle. The adjustment range is large, and it is easy to adjust even when waiting for a traffic light. The main purpose of this product was to prevent the car from tipping over, but since it cannot be tested, it is probably Large enough to be sturdy.
A. The right brake lever has no rattling, and the lever diameter is narrower than the OEM lever, which allows for better contact with the fingertips. Also, the increased adjustability makes it easier to adjust the distance between the lever and the bar, making it easier to blip the bar. (In my case, I use two fingers, middle and ring, because the OEM 5 position is a bit far.)
B. Left clutch lever, but this one has a Large rattle. The function itself is not a problem. So, I consulted with ServiceMechanic at the Manufacturer's actual store (DirtFreak is an affiliate of DAYTONA). 'Is there anything I can do to counteract this?' And. To summarize. Basically, it is a Universal Product, so you can use it as is. The only other thing we need to do is to put in a washer. He said. I see, the price reflects the cutting process of a specialized product. Washer, after all. Then I remembered an article by Makoto Kadowaki, a well-known columnist of Mr. WeBig. I referred to ↓ as a reference. Thank you very much. m (__) m
There's an easy way to fix a rattling Lever with Washer." Publication date February 6, 2023
https://news.webike.net/parts-gears/294301/
Reference.
Washer "KITACOConvenienceParts 10.5×17×0.3 Stainless Steel"
0.The 1mm Washer from HC is too thick and will not fit.
At first, I tried using a KITACOWasher with an 8mm inner diameter, but it failed. So, in case of Z650RS, the above size is better. (Photo 4, 5, 6) I don't know about other car models. Now the rattling of the clutch lever is gone. The rattling is acceptable. Please be careful not to over-tighten the bolt nut, as it will make the entire lever movement more sluggish.
Our insistence on eliminating rattling was to prevent parts from wearing off. Since this is a part that operates hundreds of thousands of times, it is expected to vary considerably with age. Well, I am the owner, Is there love there?" So I tried to focus on the details.
View detail
Low price, good quality
The pad size is long to mount on the ZETA handle bar for Monkey 125. If you cut only the inner sponge properly and use the cover as it is, it will fit perfectly. View detail