Reviews
Just right.
OEM is too low and I want a little more height, but too high and it looks like Tourer, so +1.5 MARC is just right.
I prefer sharp designs to rounded ones.
[Color] Smoke so it has good visibility even when it is face down.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Only this Screen is available in winter.
The quality is an amateur's idea, but I would like it to be a little thicker because of its height.
[Color] I chose Smoke and it looks good.
I like the way the Motorcycle looks from the side, but from the front it looks ugly. LOL!
The effect of the double bubble is much better than that of the double bubble, so I am glad that I put it on.
View detail
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Upgrading has been done:??
Installation was easy.
There is a small gap on the front tip, and the wind comes in through it, so it feels a bit awkward.
I like the design.
View detail
It is okay
This is my 7th ZZr Screen. I really wanted to get the early Double Bubble, but it was out of print (I knocked it over and it broke), and the current one has a large gap, so I bought the SR Type because it is so lame that it looks like the screen is running. It is the same as the NORMAL type with the Zero Gravity Sticker. The transparency is high. That's all I have to say. After I bought this, I bought a-teah's [Color] I learned about the ClearColor series, next is a-teah! View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Windproof performance is superior to OEM and other external products.
I'm a fan of touring and want to make it easier, so this is a god item for me, but I don't like the way it looks. To be honest, I was one of those who disliked it.
It is longer than expected, as long as Kiyomasa Kato's helmet.
If you are using high speeds over long distances and short distances, you will realize that the wind has taken all of your energy.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZrX1200ZrX1200 DAEG
The appearance of Balance has been improved.
Balance looks better than NORMAL. The Smoke Screen is also very elegant, and there are no floating parts, and the fitting is good. The new room on the meter will allow for an Oil Temperature Meter, clock, shift indicator, etc. View detail
It's flimsy.
As others have noted, it is proportionally thinner than OEM.
It will be much better if you put thin Rubber on both sides and plug it in.
Also, it scratches quite a bit, so be careful when wiping.
View detail
As per Image.
[How is it used?
Street Riding Main
Was the one you received as per Image?
Image
Was the installation difficult?
it's simple
How was your experience with it?
Street driving is not a problem.
I don't think it is suitable for touring.Sports driving
Normal screen to ImeChain, the [Color] Perfect for those who like Smoke!
I am a [Color] I bought this because Smoke likes Large!
Dark smoke is slightly transparent in the sun.
I bought this one because I was concerned about the height of the touring screen when looking at the vehicle from the side.
View detail
Some difficulty in installation
The product has a 6" hole, but it did not fit at all. It did not fit at all.
The Lock Heart Screen had an 8? hole in it, so I used a Drill to drill the hole.
When we extended the system, we were able to install it without any difficulty.
I would like to see it built with a little more Well, since it is an Exclusive Design.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Tight and Parenthesis good
Installed on a ZX-14R, no gap at the bolt position, easy installation, well nut is not included, so you need to remove the OEM screen or buy OEM parts. The old well nuts are hardened and will not fit, so I bought new ones.
I think the style is tight and parenthesis is good. Depending on the individual's physique and position, the running wind will just hit the shield, and the wind cutting sound has become larger.
View detail
Fits: HONDA CB400SB, HONDA CB400SB, HONDA CB400SB, HONDA CB400SB
Maybe it's what I expected.
I have only driven once at high speed, but I could feel the effect. I had felt that cruising at 110 km/h was the limit at normal speeds, but now I can cruise at the full 120 km/h limit with ease. If you are a small person, you may not feel it at all. I wish there was a product with a few more inches of height to make it easier to use.
Installation is easy. The build quality is in line with the price and does not have the high quality feel of an OEM product.
View detail
Zero gravityScreen
I bought the double bubble and it is perfect for touring. On highways, it is easy to drive because the wind hardly hits the car when it is slightly down. View detail
Just the right height!
I am about 174cm tall. I was not sure if I would like the CORSA or the SC59, but I prefer the SC59. There were a few places where I had to push a little when installing it, but that is acceptable. View detail
Fits: KAWASAKI NINJA H2 SX SE, KAWASAKI NINJA H2 SX
Parenthesis good!
[Color] The Smoke density is as I expected and the shape is nice.
I have k'sStyle's Spacer installed, so I can't make a simple comparison, but I think it is more functional than NORMAL.
View detail
Not so bad, not so bad, just as expected.
There are no problems with the texture, performance, or location of the holes. View detail
To increase highway comfort
I was not dissatisfied with OEMScreen, but I bought it for the comfort of long distance Touring on the highway.
The result is that the wind, which used to hit from the chest up, now hits directly from the neck to the mouth of the Helmet. It feels as if the wind has been narrowed down from where it used to hit. I felt this when I was in a relaxed position on the highway. It is difficult to feel the change when riding unconsciously on the street, and after some Speed is reached. Come to think of it, maybe not." Winding runs hard, so I didn't feel any change.
I am sure there will be some changes since they are taller than OEM.
Minus surface, I think it can't be helped because it is external, but I was concerned about the gap between the Cowl and Screen after installation. If not for that, I would have given it a perfect score.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
More effective than OEM
Selected with emphasis on design. In the normal position, the wind is felt from the area above the chest.
Of course, it provides better wind protection than OEM.
Dark smoke, so it is hard to see in front, which is normal when driving face down.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Sense of incongruity does not have a design in the flow of a car body, and the quantity to which a gap does not have attachment, either and a direct this barrel wind hits a helmet with involvement in the belly of the fit style exactly from an old product
Sense of incongruity does not have a design in the flow of a car body, and the quantity to which a gap does not have attachment, either and a direct this barrel wind hits a helmet with involvement in the belly of the fit style exactly from an old product decreases sharply. View detail
More than I expected…
It was thinner and taller than Image.
To run Circuit [Color] From Smoke [Color] Maybe Clear would be better?
Looks better than NORMAL!
View detail
Good quality, the shape of the double bubble is a bit "weird"
Some skills are required during installation. The original three fixed buckles of the windshield can be removed by adding a little detergent to lubricate, otherwise it will be difficult to pull out. The mounting hole closest to the outside is a little off. I don't know if it's a problem with the mold opening or my installation. The other 4 holes are just right, but this one is a little off. -------------------------------------------------- -------- I need some tips when installing. The three fixed deductions of the original wind can be added to add a little washing, otherwise it is difficult to pull down. The installation hole closest to the outside is a little bit, I don't know if the problem is the problem or I installed the problem, the other 4 holes are just right, that is, this is biased. View detail