Reviews
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Screen for Zero gravity ZX14R
When I had a ride on 1400GTR, I raised the movable Screen to the maximum and I didn't feel the wind pressure while driving. So I installed the Large type Screen for the winter.
However, since the installation was in September, I don't know if it will be a measure against the cold, but the windproof effect was felt enough (laughs).
It is easy to install because it only fastens with Screw.
The dust did not fit as well as it did on the original Puch Screen, but it wasn't too bad.
View detail
Fits: KAWASAKI NINJA H2 SX SE, KAWASAKI NINJA H2 SX
Same level as OEM
[Color] I bought it for the purpose of making it smokier and slightly more windproof.
Size is almost the same as OEM, and the windproof effect in normal Position
There was no change. Windproofing when down is good, as per manufacturer's comments.
[Color] Smoke's got a nice density to it though. [Color] Clear degree is fine Scratch
It has a sense of quality, and it is a quality that is often found in foreign products.
View detail
Refreshing design with no waste
[Usage]
Street riding, touring, mountain passes
Was the one you received as per Image?
MRADouble bubble that I have been using. [Color] Smoke is not bad, but I didn't like the design of Screen's step in my Image, so I decided to use SR Type's [Color] I thought that Smoke was something close to my Image.
Was the installation difficult?
If you don't fasten the bolt temporarily on the diagonal line, the bolt hole will not be even etc. and you can't install it. Also, the Washer under the Bolt is a Black Material.:I replaced it with a new one from Plastic.
How was your experience with it?
I think the design and the way it looks depending on the riding posture are perfect.
・ [Color] Smoke, but I don't think it's a problem for ETC.
[Included Parts:were they on?
It was only this product. I'll check at the next inspection if I don't need the molding on the edge when I inspect the car.
[Was there anything that disappointed you?
The bottom part of the Screen of MRA has Gradation, and the area around the Meter was not visible. [Color] This is Smoke, but you can see the bottom of the Meter.
[Opinions and requests to Manufacturer
I want LogoSealZEROGRAVITY to be able to retrofit without putting it on Screen.
View detail
Fits a 2020 NINJA2 Helmet 50R
2020 NINJA2 Helmet50R (EX250P) attached to the
NORMAL is [Color] It's clear, so I wanted to change the look to dark smoke.
It's not transparent at all, so if you don't like that [Color] We recommend Smoke.
The replacement is just to remove the 4 bolts of Mirror, so anyone can do it.
Zero gravity products have 5 patterns.
I'm very confused.
View detail
Fits: HONDA CBR250R (2011-), HONDA CBR300R, HONDA CBR250R (2011-), HONDA CBR300R
The effect is Large, but the production is a foreign product.
In order to improve the appearance and windproof performance from the OEMScreen of the '14 MC41 CBR250RSecond Type Model, the Double bubble [Color] Buy Smoke.
I couldn't decide between the CORSAScreen made by the company and the Racing Screen made by PUIG, but I decided on this one because of its appearance and the fact that I got it cheap.
The product [Contents] It contains a body, an Instruction Manual, a Large Sticker, and two Large Stickers, which are the same size as the ones on the Screen side. (Apart from the included Sticker, the Sticker is pre-pasted on the ScreenBody)
I bought it a long time ago for my 03'ZX-6R and it came with a protective molding for the Screen, but it wasn't included in the package because of Cost reduction.
The product looks like Image, not too dark. [Color] It's like Smoke, and at a quick glance it's a beautiful product with no particular rough edges.
It has good accuracy of installation with the car body, and the position is perfectly set without any processing.
…However, if you look closely, you can see that the cut surface is not well processed, and the mounting holes that should be open are not open. (Lol)
The installation itself is simple because originally it removes OEMScreen, transplants Well nut and Rubber Bush for installation from OEMScreen, and installs it, but in the case of MC41, Side cowl removal, Meter panel removal, Upper cowl& However, in case of MC41, it is troublesome because it is necessary to detach Side cowl, Meter panel, Upper cowl & detach Headlight unit.
It is necessary to open it by Drill&Fileetc. because the hole which inserts and fixes the projection of Meter panel at the time of the installation of Plus mentioned above is not opened.
I've seen your blog on the Net. (That means it's not only our product …) If installed without this work, a gap will be created between the Screen and Meter panel, which will look awkward.
It is about the windproof effect, but in the usual riding posture, with OEM, both shoulders as well as the upper part of the chest is almost exposed to the wind, but after the replacement, there is no change in the wind pressure on both shoulders, but from the chest up to the lower half of the Helmet, you can feel the windproof effect from about 60-70km/h.
In a considerable speed range, there was a feeling that Helmet was shaken by a little change of the air flow until now, but whether the rectification effect of Screen was effective or not, the wind contact became soft and the feeling of being shaken also disappeared. To be honest, it was a happy miscalculation because I did not think it would change so much.
It is the distortionlessness of the field of vision that the manufacturer claims when it is put down, but in the shape of the Double bubble, without any distortion … is impossible.
There is no unnatural distortion of vision due to the Rose of thickness, but if you are concerned about it, I think CORSA is better.
It also increases the height of the Screen and [Color] With the Smoke, Meter visibility during the day is also better depending on the angle of the sun.
However, the presence of the Screen in the field of vision by increasing the height is bothering at first. … but you will get used to it after a day of riding.
I think that there are pros and cons about the appearance, but the custom feeling comes out at once. It's a good product with good cost performance in that sense.
I think that the Rubber parts of the Screen fixation are deteriorating in the age, so I think that it is good to Refresh this opportunity.
Personally, if you can tolerate a little bit of processing, this is a recommendation for a good cosmetic Custom.
View detail
ZEROGRAVITY Zero gravity Screen [CORSA]
I chose this product because I wanted a Screen that was more windproof than OEM.
The OEM was hard to hit the wind when driving at high speed unless it was quite down, but it became much easier after changing.
It doesn't look unnatural, and if you don't look carefully, you won't feel any discomfort at all.
I was able to install it without adjusting the hole position. However, I prepared the OEM new Well nut.
As others have commented, there is nothing on the front of the Screen, so you can see the back of the Meter. I put some Black Seal on it to make it look OEM.
View detail
The best
I replaced it from OEM and it is GOOD.
It works well as a windshield and I have no complaints about the Design.
The seal of "Manufacturer" or "Brand" was a little bit messy.
View detail
Fits: DUCATI 999, DUCATI 999R, DUCATI 749, DUCATI 749R, DUCATI 999S, DUCATI 749S, DUCATI 749
Let it be Cancellation.
The arrival of the goods is too late, so please let me say Cancellation this time.
Please.
View detail
Replace with Clear Screen
I bought the same series this time as I had already installed the same manufacturer's product in a different color last time. The installation was easy and the visibility is excellent. (^o^) View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R
It looks good on ZrX1200 DAEG.
I installed it on my ZrX1200DAEG2015MODEL. it is a change from MRAScreen to Zero gravityScreen. The color is Dark smoke.
The good point is that the size balance with ZrX1200 DAEG is very good, the design is sharp and the face is refreshing. Easy to install (There is no gap in the hole position, and the existing Bolt can be used as is.) 。
However, of course, you cannot see the front through the Screen because of Dark smoke. In addition, dirt and dust are conspicuous.
Nothing bad to report so far.
View detail
Zero
Good products, high quality, on-time delivery, will buy again next time, hope to have many Japanese-made products for good prices. View detail
Screen
The OEM was Light smoke, so I dared [Color] I think it's good that the screen itself is thick, and there is no distortion in the field of vision. The installation is just to remove and replace the OEM, but it may be a little troublesome if you don't remove the Mirror and make a gap in the Cowl. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It will be Race ish.
The look and feel is more Race ish than OEM Screen.
Since I have the Smartphone Holder on, I couldn't get it down enough on the OEM Screen to make it worthwhile, but I was able to get it down a little bit and the wind stopped coming!
View detail
Excellent visibility! And it's windproof, too?
While each manufacturer has their own good points in the shape of the screen, I decided to use Zero gravity's this time.
The trigger is the good shape. The streamlined shape from Upper Cowl is beautiful and looks SMART from the side.
As far as visibility is concerned, it is excellent and it feels like you have a wider field of vision compared to the OEM Screen.
Windproof performance is definitely improved. When you lie down on the Tank side at high speed, the height of the top of the Helmet and the Screen is just right, and the wind itself is almost imperceptible.
The bad point is that the position of Screw is a little out of place and it is quite difficult to install.
I managed to put it on by force, but I would like it to be more accurate.
Another point is that it is easy to be scratched. It is thought that it is a stepping stone, but even if the speed which did not come out Large, the scratch which gouged considerably comes out.
You may want to change the thickness of the Screen slightly.
If you're considering buying one, I'd suggest you think again.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
make-believe
After hesitating with the rising sun wind shield, it is this one with many reviews.
Poorly made, I had to machine the mounting holes.
I've already pasted ManufacturerSticker and it's in the way, I've pasted it and it's got an additional sticker.
I don't have to tell you about the windproof effect.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Demerit is better than Merit:・・・・
Impressions after 1,000km If you think that the higher Screen makes it harder to get insects, it is not so different. Bugs are normal.
When there is a crosswind on the highway, the Screen is affected more than necessary because it is taller, and it is dangerous.
When you lean forward at high speed, the hair clipping sound is amazing. It is the explosion sound that wind rolls in near the ear as much as possible (It is similar even if it is about 60 km)
Airflow is poor, bugs usually stick around a lot, and stability at high speeds is poor.
I feel like the height of this Screen on Mega sports has more drawbacks than advantages.
I can't recommend it in conclusion.
View detail
Screen
There's no distortion, and it's thick, so even at high speeds, there's no blurring, and visibility is good. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Design like no other!
[How is it used?
Replacement from OEM
Was the one you received as per Image?
Almost as Image
Was the installation difficult?
It's easy, but the product bag says that 2 of the 6 OEM holes are not used, but I don't know what that means.
How was your experience with it?
The windproof effect is a little lower.
[Included Parts:were they on?
Decal is a little large.
[Was there anything that disappointed you?
It is not a large problem, but the joint with Cowl did not fit comfortably.
Other items that would be helpful
The construction manual is in English version, so I could only understand the atmosphere, but there is no problem.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Looks good
It will look and feel like Race ish
Installation was not difficult.
It is necessary to be careful not to drop it when removing the screw that stops Upper Cowl.
It is useful to have a Driver with a magnetic tip.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R
I should have replaced it sooner.
The wind resistance when touring is totally different! View detail