Reviews
Although there is an effect, ingenuity is necessary for installation
Installed in YZF-R1 USMODEL 2013 formula
It also looks good, actually running and felt the windshield effect more than OEM.
What's disappointing is that as the other people have also written, the installation precision with Cowl is poor so that it was processed everywhere.
Because the thickness is thinner than OEM, Crimp of Mounting Bolt part in Mirror tends to sweep easily, so we adjusted Bolt's Color for a thinner one.
At the very least, it would be nice to attach Color for fixing and Rubber Bush according to the thickness of Screen
View detail
Fits: SUZUKI BANDIT1250S, SUZUKI BANDIT1200
I was able to run comfortably on the highway.
I had attached the MS431SSpoiler type,
Although better than NORMAL, the cruise on the highway
I felt it was a bit irrational.
Helmet seems to finely ups and downs due to the wind pressure involved,
In addition, as Helmet moves with eyeglass use, the eyeglasses also shake trembling,
The front became very hard to see, and even fear was felt.
As a result of investigating various thoughts with this, I chose this longest Zero Gura.
100 km on expressway / H The cruise is clearly a different thing.
Helmet almost improves poor visibility due to fluctuation.
It is really refreshing to be able to run with confidence.
"Those with more thickness" There is also a Review called
I think that there is no problem.
Disadvantage
- Chile matching is Large. It is because the hole positions do not match.
Finally I feel the Screw hole comes into view with a slightly expanded state.
Also, in the vicinity of Headlight, the groove on which Screen carries originally
Screen Dimensions are short so that space is available
How do you think about a bit.
- Protective mall is not included.
Edge is standing so it will be dangerous as it is.
The car inspection will be NG, maybe.
Buy and purchase a mall separately.
I would like to have this attached by all means.
- By pushing "Good morning" With a bowhead, HelmetShield and
ScreenEdge gets stuck. It can not be helped it becomes long.
Handlebar when turning Handlebar around Attachment
Also note the position.
Improvement of wind pressure on the face due to running wind enough to eliminate all defects
100 points perfect score.
I planned to return it to original when summer came, but this ride
I do not have the courage to throw it away.
Recently, I feel like I did a good shopping.
View detail
With fast Touring
I changed the Ninja 1000 in this summer, but I was considering replacing the upper body's wind hits at a higher speed than the ZX-14R and FZr 1000 that I was on. I got to this product with a good reputation for COSPA compared with various.
Just replacing the Bolt with 6 bolts for installation, the position of the hole was finished in 5 minutes as well as OEM. I changed appearance from Clear to Semi-smoke so it's fine to feel tightened. There are other good points for other Manufacturers, but this product is fully satisfactory.
View detail
Black busa - Dress-up
I purchased Smoke gray of SR Type. In other impres, it was said that the shape does not change very much with NORMAL, but when I installed it actually it was finished in Stylish rather than NORMAL. Sometimes Body color is Black, it was Large correct answer that I chose Smoke gray.
About the windshield effect, I think that it is about the same level as NORMAL. To the extent that I get on the streets I do not mind, and I get a little unsatisfactory when I run on a highway. However, because I am satisfied with the goodness of Silhouette, I cover the height of Screen by feeling forward while driving at high speed, so I do not feel so inconvenient.
View detail
Appearance and performance
After all, because the height is low in Normal screen, the resistance of wind is Large when Speed ??is issued. I do not know because I have never used any other shape, but the Double Bubble Type can feel a lot compared to NORMAL.
Previously I used the Smoke Type, but since it is difficult to see the front when I am in a lying down state, I tried to use Clear type this time.
View detail
It's a nice feeling
Together with the SH 40 of the previous purchase, Ninja 250 R feels good and TouringSpec. became. It is easy to exchange the Screen, and Chile with Cowl also fits well than I thought. I do not feel discomfort with Body design.
Wind protection effect is also high, just by strengthening a little forward tilting posture, the wind will be able to escape above Helmet even at 60 km / h. I do not feel the distortion of the scenery through Screen I was worried about.
If I say greedy, I think that if the SIDE section in the foreground is also overhanging, I think that I will be able to hit the shoulder-hitting wind, but I am satisfied enough.
View detail
The burden on high-speed driving has been alleviated!
CBR's OEMScreen was unable to flow the wind almost at high speeds and so on, so I bought it because I was traveling crouching down to the biggest limit.
I changed the shape to Double bubble, but the wind of running has really changed. Even if you do not bend over like OEM time, there is no Stress. It also seems Smoke is taking a little bit and it seems that it matches the black car body.
Looking at Mellow Smoke 's Shield, there is no such thing as hard looking forward. I also recommend making it because it is solidly made!
View detail
Fits: DUCATI 1098S, DUCATI 1098, DUCATI 848, DUCATI 1198S, DUCATI 1198, DUCATI 1098R, DUCATI 1098S
I should have known it from the beginning
Change from Marc1Type of the same Manufacturer to Type. Since there is a height here, the wind pressure reduction effect is high. Installation and Fitting have no problem at all. Transparency is also perfect. However, the delivery was long. - - -. View detail
Race ish atmosphere
Compared to OEM, it is quite a Race ish atmosphere!
I was able to imechen around the poor Handlebar.
The running wind was also alleviated and I was able to run very comfortably and I am satisfied with Large.
View detail
Windproof Up, Up to Custom
This time ZEROGRAVITYZero gravity : 1628102 Screen Double Bubble Type Color Smoke to Ninja 250 R 12 We tried to purchase with expected wind protection up.
Removal was removed from the Hexagonal Wrench of the on-board tool at 4 places,
OEMWalnut still attached to the two screens at the top of the photo (Nut with InsertGold tool in Rubber) Remove the. It's pretty hard.. We will port the removed Walnut to the top 2 places of the Screen which we purchased this time. It is Large strange that it does not fit further when installing than when removing.
Once you have entered safely, you completed installation with the removed procedure. The screen position purchased this time was slightly out of position at the top of Left. Because it is a curved molded item, it may have caused some backlash due to aging? I thought that it was useless, I put Bolt in hold with Cowl and Screen and installed it. Processing of the hole was not necessary.
There was not a fine Wound, Design was also good.
Windproof wind is a little less concerned about wind.
Visibility is not too dark with Smoke so we could secure visibility even with Screen.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Screen
Previously I used the company's Double bubble, but I thought that the look from the front was not very good, I changed to CORSA this time.
Depending on the riding attitude, the wind protection effect seems to be slightly higher for CORSA.
Silhouette from the front has improved Refreshing, but from the side it seems that the shape of Double bubble is better.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Good!!
ZZr1400 (06) I attached Dark smoke Screen to. It's just replacing with OEM, so it will not take 10 minutes or so to finish work! ♪ looks good too ♪, test run! I gave a hard to say Speed ??but I can understand the difference more closely than OEM (Lol) However, if it is Dark smoke, looking forward through the screen is hard to see (Lol) My Shield of Helmet is also a Dark smoke, is not it? (Lol) If you do not cut it off, you can even Dark smoke, but if you see the front through Screen, Clear may be nice!
View detail
Fits: SUZUKI GSX1300R, SUZUKI GSX1300R
After all, it is settled in this product.
It was worn from the beginning of purchase, I cheated on Screen a few times, but in the end it has calmed down.
It is good that it is in the color of the car body and does not insist too much.
View detail
Detail shape
I purchased a famous Screen. Good visibility, transparency and appearance after installation are good. Just making the shape of the visible part was solid, but raising one difficulty, the invisible part was problematic.
Ultimately Screen will be tightened and fixed with Mirror with Bolt, but unlike the shape of Mirror's OEM Rubber stay, the corrugated part is in a linear shape and it is necessary to sandwich it in Cowling and fix it The area is insufficient, after all, fixing of Mirror part is somewhat short. After installation, additional tightening etc other than the Mirror section etc. Periodic Maintenance may be necessary.
View detail
Zero gravity:Screen Double Bubble
I also used it for the previous Motorcycle. Traveling on a highway will be quite easy. Moreover, although it is visibility at night, because it is not possible to lie down in the city ride, although it is my personal opinion, there is no particular problem. View detail
It is Repeater.
I think that it is Screen of the best class even with transparency and mounting accuracy. I bought Repeat because I crashed and crashed the other day.. When the shape is also turned down, there is no Wind Cutting sound so it is Large. Less distortion ○. View detail
Fits: SUZUKI GSX1300R, SUZUKI GSX1300R
I tried to change from Clear to Smoke.
Originally I was wearing Clear of Zero gravity Double bubble.
Clear was also good sight, but reflected light of sunlight was a little worrisome.
In this time, I tried smoke making without changing the shape.
There is no reflected light around Meter, and the circumference of Front is also quite tight..
Since the windshield effect has been experienced, I got it to play a part in Makeover.
It sounds nice.
View detail
Fits: SUZUKI GSX1300R, SUZUKI GSX1300R
A lot of scratches
There are many abrasions when you arrive and open it quickly ... Although there is no problem packing the goods themselves.
I managed to erase it with Compound for Plastic!
Also, the hole does not fit ... It was 4 to 5 mm misaligned. I managed to rub it and manage it again.
If you add your own hands. There is no problem, but I say it clearly was troublesome.
View detail
The making is sweet
Shape, Color, windproof performance is good.
Also, it has no distortion and good visibility.
However, the part of Duct does not match exactly, it floats. There are many fine Abrasion, too bad if you think about the price.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
It is a windbreak performance in the middle
MRA Screen (Touring) It is an exchange from.
In MRA's, when car wash, water entered from the hole to the Meter side, and when running downhill it was hard to see the front due to the curvature of Screen, so we made this product with less longitudinal curvature.
As aimed, it is very easy to see.
Clear of Double bubble seems better.
I emphasized the appearance and made it Smoke (* '∀ `*)
View detail