Reviews
Fits: HONDA CBR1000RR, HONDA CBR1000RR
Product satisfied!
If you thought you could remove the Screw immediately and you could fit it immediately Large mistake? You have to desorb from Cowl to Mirror and you can not install it yourself and have asked Shop ... View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Extremely low installation accuracy
The first thing I bought was that the Large size of Well nut and Color's hole was the same, so I extended the Color part with Drill and broke just by inserting Color by hand. The second time carefully expanded the hole in the Large Strip, but the other four holes also have poor mounting position accuracy and can not be mounted unless Cowl is distorted. It is better not to be free if you have to correct all 6 Screw holes.
Also, the attachment part = the surface treatment of the invisible part is miscellaneous. Furthermore, Screen thickness and Cowl step are not coincident. I never purchased it if I was looking at the actual thing.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
1pc. Because it cracked, Quantity : 2pc. Purchase Set
1pc. Although we scratched the Color hole expanding and scratching so as not to break as in the other, the accuracy of the other four hole positions was also badly jammed and attached in a state where Cowl was slightly distorted. Others 4 holes can not be installed unless they are re-revised in reality. This is the first time Manufacturer with poor accuracy. It is better not to be free from the beginning if it is necessary to modify all 6 Screw holes. The difference between Cowl and Screen is also different. Surface treatment is also mounted position (Margin part = invisible part) The surface treatment of miscellaneous. I will not buy it twice if I see the actual thing. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Precision poor, brittle and fragile so be careful!
Because the Largeness of the color of the front two and the hole of the last 4 well nut are the same, if you insert the color holes of the previous two large with Drill and insert it by hand, just by inserting by hand, Screen cracks It was. Shock in an unused state. Material : Acrylic so visibility looks good, but it is easy to crack. View detail
Easier speed than NORMAL reliably
I am installing in the 2013 model CBR 1000 RR.
The rectifying effect can be felt certainly without discomfort in the shape.
Smoke, but I think the color is just right.
View detail
I like it.
Although OEMScreen looks nice, it does not play the role of preventing wind pressure during high speed driving, so buy this product that seems to have high wind protection effect.
Windproof effect has been upgraded so much that it does not compare with OEM.
For safety confirmation at the time of lane change, if you look sideways you can bring your neck (Lol)
Color got lost as Dark smoke, but my Motorcycle is Black, so I chose Smoke as to how to make it too black.
You can see the road surface perfectly through the Screen, (I do not see much because it is accidental if I see it too much. )
So I think that you can choose according to your preference.
Installation is easy as removing Bolt 4 books, pull out Screen, replace and tighten Bolt.
The hole also fits Exactly.
Well nut(Material : Rubber's Nut) needs to port OEM ones only at the top two.
I own 2 other screens and I bought OEM's Well nut because it is troublesome to port one by one. (1pc. It should have been around 60 yen. )
As I thought it looked like Tosaka, I would like to use this when I tour.
View detail
Installation accuracy and shape are good, but ...
I installed it in 2016 YZF-R1.
I like the shape and also the mounting accuracy is good,
There is a place I can not forgive by all means.
If you lie down on high-speed driving, your line of sight will come near the top of Screen, but unfortunately it is distorted.
I think that it is the biggest Large thing.
Can you Recommendation to a friend?
"No" Even if you press
"Yes" Why will it change into.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Sounds good
I used the same Manufacturer Standard until then
ZZr 1400 has low screen position Long touringetc. When traveling at high speed Helmet From the upper part to the shoulder As the running wind hits, it is not a translation I want to do but it was not comfortable
Double bubble can not attach Bolt position straight, but it is not bothersome with a little gap
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
I do not want to break the OEM's style
Personally, I do not like bubbles that I've mocked up, or the standing up Touring type.
I like Category's low type, so I do not like CORSA either.
The ZX - 14R had its original rectification effect low, so MARC 1 was also out of the candidates.
So I decided on SR Type with Style similar to OEM.
Accuracy, quality is not complain!
I also like the shape.
I do not care because Cospa does not care.
Rectification effect is not as good as OEM.
Height 176 cm, 80 km, TanClock of GIVI is wearing.
For that reason, I will not run as if I am completely down.
Even if you lie down a bit, the wind hits the shoulders.
Even if TanClock is removed and completely lying down, the wind hits the Helmet.
Color is Dark smoke.
I will not run downhill, so I'm good, but I can not see it well in the daytime.
I can not see at all at night.
I will never be able to shoot through the screen.
By the way, I can not see it well, but there is no distortion.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
It is not possible without impossibility.
It is impression attached to ZX - 14R. First of all, it is delicate though it is glossy finish by hand one by one to product explanation. I polished with specound for mirror surface before mounting. The dullness will be beautiful. Next, when attaching to the year with Cover on ZX - 14R Meter, the two holes in the lower side of the Screen are attached with plastic color in OEMScreen, but are not used in Zero gravity. However, I decided to disconnect Well nut. By doing so, ScreenQuantity : Pair (for Left and Right) When fitting the Well nut of four places, the height matches. Easy to install on Motorcycle Body and also fit in six holes. However, since Zero gravityScreen has almost no unevenness like OEM, a subtle gap is created in Screen and Upper Cowl by the subtle step and the thickness of the head of Well nut. I was thinking to stop installing honestly but the step and the gap are equalized etc.. And it continues fitting by convincing himself that it does not interfere with Upper Cowl thanks to the gap. When Rokkasho's Bolt is fully tightened, the above-mentioned equivalent etc etc. There are steps and gaps, but you can install it tightly. Limit I'm OK. There is no strange distortion in visibility and no problem. I can not say anything because the windbreak effect has not been used yet in earnest. Finally gaps and steps can be delicately delivered. So I think that there is no problem on the product itself if it gets used. View detail
Truly Zero gravity
NORMAL 's Screen is low because it calculates aerodynamics including Helmet Because Helmet was shaken when eating crosswinds during high - speed running, but a burden was imposed on the neck, but as soon as the exchange took place, the wind would flow over the Helmet and flow to the back It became comfortable as it became. And even if it goes backwards looking at Screen from ahead, there is no distortion and you can judge the road condition accurately. I thought about other companies' products, but it was correct with Zero gravity. View detail
It is amazing that there is no distortion and transparency
I had attached MRA but painted for Repsol so I bought Zero graze this time to restore. Purchased CORSA because I wanted ScreenHeight.
Exceptional transparency and less distortion as seen in the overall review. It was good to buy! No complaints.
However, since the gap behind Meter is visible unlike MRA and a slight gap is formed at the tip of Cowl and Screen, I decided to hide it by pasting Carbon Seat.. It feels only to the extent that the effect is a little easier than MRA even in the high speed range. Because I will not lie down or blow away ...
Personally looks like Parts.
By comparison MRA and Zero will be glued
As a reference.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR
It is largely satisfactory.
09 year cbr1000rr RepsolColor. Use did. Before using Zero gravity Screen, I used MRA 's Smoke Double Bubble Screen so I write comparison impressions.
Clear Screen Zero Gur selected Clear because I wanted to change it. It is more natural than MRA's Semi-smoke but its visibility is clear and easy to see. However, the height of Screen is about 1 centimeter higher for MRA, so Style seems to have liked MRA better. The rectification effect seems to be no big difference.
The thickness of Screen itself is also different, MRA is slightly thicker and feels like upper part. It feels like Zero Gra is broken with Paris due to shock.
Repsol has a sticker on Screen but in MRA the shape was too different from the OEM so it was impossible to paste it but Zero Gra was stretched a little with heat and stuck like an OEM Screen For RepsolOwner you can recommend Zero graver than MRA.
The quality of the Zero Gra Screen itself is a very satisfying quality. As you guys are impregnated, installation accuracy was no problem without distortion.
View detail
Cospa is a high Shield.
NORMALShield of GSX-R 750 is too low to continuously blow up from the chest and it gets tired so buy this item.
The wind hits the upper position of the Helmet and you can realize that the wind does not hit if you hide it a little.
The situation is better than NORMAL, the construction is solid, the price is also cheap so COSPA is very high.
View detail
It has good mounting accuracy and no distortion.
Buy at the time of purchase, I got lost with things of FOR JAPAN MODELManufacturer, but this one seems to be Large rectifying effect, wind protection effect so buy here.
I was worried about installation precision because it was overseas Manufacturer, but I could install it with OEM and Bolt-on.
There was almost no distortion of Screen, I thought that there was only Manufacturer, which is popular among the coolest stones.
I expect the rectification effect on the expressway.
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
Very nice
As it takes a little time to install, I think that a day I can challenge myself is a day with plenty of time.
Side cowl - Inner panel - Remove Mirror and loosen the Upper Cowl and install it.
I found a video with Net, so I think that I could have made it Smooth.
If you clench the Inner Shield? Claw properly, you will have a gap on the Position lamp, and it will cause Wind Cutting sound.
The running wind of NORMALShield was around the chest, but I think that it is comfortable even in overtaking on a highway if it gets around to the neck in this Shield and lightly hurt.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Regrettable accuracy of Bolt hole position
Until now I was using STD TypeDark smoke of the same Manufacturer
Screen I chose Double bubble this time because it was good hole position and accuracy, but regrettable
Screen upper end Quantity : Pair (for Left and Right) There is a difference
Bolt becomes oblique as the hole position is not straight but tightened
There is a gap with Cowl
I am disappointed just because Standard was good
View detail
Valid for long touring
From July in Saitama to Longmi Cape in Blue Forest From Los Angeles to Long touring 1900 Km When I opened Wa Big on PC, this product suddenly appeared in Sale so I clicked In Stock 1.
That's right. It is a complete impulse purchase.
Personally because Motorcycle Custom places more emphasis on functions than it looks, Stepped Screen wanted me to try it, where the plan of this long-distance Touring and the plan BigSale happen to overlap and happily fitted.
Replaced with MRA 's STD Shape' s Clear Screen so far, the mounting accuracy was very good and the hole position Exactly.
There is little distortion with respect to the field of view through Screen, I do not feel Stress, but the view at night is still inferior to Clear. (There is no problem because it does not fly enough to lie down in Cowl at night.)
Clear flow effect contributed to Large. In STD Shape, feeling of being down on top of Tank can be obtained to a degree that rounds down his back and lowers his neck.
As for the processing of the end, MRA was Cut and it felt that Windscreen Mole was attached as it was, but here it is being processed to Beauty to the end and it is refreshing without the need to attach a mall.
The moment of impulse purchase "Oops I did it" I thought that it was good to purchase and actually buy it.
View detail
Fits: DUCATI 1098S, DUCATI 1098, DUCATI 848, DUCATI 1198S, DUCATI 1198, DUCATI 1098R, DUCATI 1098S
Perfection
As scratches on the previously used Screen became more and more replaced. I was in Sale so I could buy it worth it and COSPA was good. Maybe I can make another Style next time. View detail
good
I use it with a pair with NINJAZX 14 R, but I feel that the conversation at Income got better.
I feel that the amount of insects attached to Shield has also decreased.
View detail