Reviews
It is different from cheap stuff
OEM Product Oil leaked, so I immediately purchased it.
Unlike cheap stuff from YSS, it is a good thing to do. Precision of the exterior also seems to be accurate with Cut-out.
I thought that the color of Spring was changed and I thought that it was good for Dress - up, but I thought that it would be cheap if I made it fancy color well, I thought that I thought that other colors were good.
View detail
Exchange from Cheap Shock
Oil leaked from OEMRear shock, we installed cheap R 0 Rear shock for the time being, but because Corner is not stable too much, it is an exchange
It will be slightly raised but I do not mind that much.
When comparing from cheap shock the car body can be bent stably
I am enjoying it within the reach of the hand where the gold amount can not be applied to such a hobby so much, but it is clear that things that are too cheap are only forms and not usable
View detail
I added it to JADE
Quantity : Pair (for Left and Right) If you do not remove footpeg the lower Bolt will not come off.
The upper Bolt will not remove the Reserver tank
You can hold down Nut comfortably by shifting.
However, it does not take time and can be worn quickly.
Since it is a feeling that the car height gets a little low when it is in the shipping state
If you do not want to lower it is necessary to set it.
(It is incongruous feeling that Large is different only by 5 mm difference)
Footpegetc after complete wearing. To Expose - - -
After installation, Spring rate change is the attached stick
It was OK with Hexagonal substitute as it can not be turned narrowly.
Large Make sure to set it
Notice the difference in ride comfort. It might be quite good !?
(Is it normal because Normal suspension was causing Oil leakage?)
Yes Yes
Before installing, you must keep a serial number
It is inaccessible after wearing.
(Required for User registration)
Spring rate and Damper, car height distribution etc etc. of
I can expect to expect a little setting because I can not say anything.
I feel that afterSupport is also solid
Small thoughts squeezing out
I wish I could have bought it.
View detail
Fits: HONDA CBR250R (2011-)
CBR250R(MC41)
Originally I thought that I want Pre-road adjustment of OEMRear suspension between 3 and 4 steps, but if I change Front fork spring to Hyper pro, I want the range of adjustment of Rear, with damping adjustment - I was attracted to cheap and chose YSS.
It was attached to Smooth without attaching any processing and processing, the adjustment width is wide and setting is likely to be enjoyable.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI GPZ900R
Mostly satisfied. It is cheap.
Anyway, it is cheap, there is no shortage in performance if town ride + α.
It is good to be able to adjust the extension and contraction. Canary soft feeling when in the Turushi state (175cm65Kg) So it seems there is a need to pack each one.
A bad point :
GPZ900R (-A11) Because I bought in, I thought that it was a pon attachment, but in our vehicle End Musk Bolt about 5 mm in relation to the thickness of the wall of the eye part, Stainless's Bolt (M12X70mm) And UNut were prepared.
Because there is no 750R Parts List, I do not know whether 900 R and OEM Bolt are the same in the first place ...
View detail
Fits: BMW R100GS, BMW R80GS
Suspended Cost performance of NORMALLevel is good
I think that Cost performance is good. There is performance of NORMALLevel, there is no dissatisfaction on use. There is no problem mounting. Lineup of old car is very appreciated. View detail
We introduced for ride comfort
Hyper pro's SPG was put in, but since Pad Valve has not been overwhelming, I added PAD Valve. In the processing of Seat pipe, hole of NORMAL is further processed to φ10, shifted by 90-degrees, and two φ8s are added on 10 mm Meter (The lower side has Oil lock peace and it could not be processed) Chamfer on Leutor and finish, Oil seal, Bush as new and reassemble.
PAD Valve is φ33. 5 tightened 2 turns, oil level 170 millimeter, Spring's Pre-road 1. 5 mm Meter (Equipped with a 70 kg ride Sag of 1 G ride does not protrude and it is the same as NORMAL) As Oil is a bit hard on ASH # 40 Oil seems to be a bit more soft, the oil level will be lower when increasing the tightening, the oil level looks better if the tightening is decreased.
Spring collar has 15 mm MeterCut with addition of PAD Valve (Pre-roadADJ, SPGetc. Cut according to change).
The rough road surface, stability feeling of sinking during Brake, etc. got better, I'm still lacking boil down, but I will set it to mind while enjoying the change.
View detail
Can you make a drastic change in old car Fork?
It is installed in KYB Φ 36 OEMFork of Z1000 mk 2 series.
In theory we tried to introduce with the idea that if the perfect setting can be made with this, it should become structurally superior with respect to the part of the attenuation pressure rather than VITO KYB and PMCKYB.
The disadvantage of the Large is that since SettingData does not exist much on the Web and there is no information that can be referred to, each person specifies the Spec. That it is in a state where you have to do your best on your own according to.
Personally, although Orifice processing of OEMDamperROD is recommended, it does not need it. (Since it thinks that it is hardly attenuated in any case)
I took off the top cap, pulled out of Spring, it was easy to wear it with Image like dropping with Poton from there, and it is easier to stick with Set.
I took a second step to purchase Replace's Fork, and I can not afford to pay for Small, but I think that it is Items of Recommendation for those who are interested in leisure and experimental efforts.
It is for those who can enjoy PRO settlement of set out and remodeling itself rather than to improve running.
View detail
[Webike Monitor] It purchased instead of the Normal suspension which left for . Since a price is cheap for an external article and an adjustable range is also wide, it is very much satisfied. Whether whose Timing which my merely bought having b
[Webike Monitor] It purchased instead of the Normal suspension which left for
.
Since a price is cheap for an external article and an adjustable range is also wide, it is very much satisfied.
Whether whose Timing which my merely bought having been bad, and two months and a half are slightly dissatisfied in a delivery date.
View detail
Pure Sas purchases by oil leakage for urgent exchange. Although the price was cheap, goods arrived and it saw, and although it is an amateur, texture is and is satisfied considering a price.
Pure Sas purchases by oil leakage for urgent exchange.
Although the price was cheap, goods arrived and it saw, and although it is an amateur, texture is and is satisfied considering a price.
View detail