Reviews
I was not looking for such a high performance suspension, but I am satisfied with Large.
[How is it used?
Commute 30 km round trip per day, sometimes using the Metropolitan Expressway.
Was the one you received as per Image?
Yes.
Was the installation difficult?
I had a Motorcycle shop install it.
How was your experience with it?
Setting is left at the default value, but even in this state, the road surface tracking is increased, and it feels like it is absorbing to the ground, increasing stability.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
Nothing in particular. I am very satisfied.
Other items that would be helpful
I would be happy if the delivery time was a little faster.
I wanted it to replace the OEM suspension that was missing.
View detail
It is a very high performance Rear suspension among the XG250 TRICKER exclusive products.
It has been almost a year since I purchased it, so I am writing an impre
YSS is actually a Quantity:2pc. Set eyes and experience with MZ366Series (Our Series is MZ456)
This MZ456Series has a much thicker Damper Piston diameter of 45mm, while the MZ366Series has a Piston diameter of 36mm. (same etc. as OEM?) Therefore, there is room for Damper capacity.
There is also a MODEL with Reserver tank above this MODEL.
(I was on a budget Over so I couldn't afford it).
However, it still felt wonderful to ride and drive!
The mz366Series also had a suspension that worked well with the OEM ratio, but I could feel that the damping was more effective with this suspension.
To give an easy-to-understand image, the MZ366 absorbs the XG250 TRICKEROEM's gapping and bouncing with its fast stroke speed, while the MZ456 (this MODEL) The "Stroke" was a slow stroking, comfortable and tame ride.
Of course, the damper is adjustable, so you can change the damper characteristics to your liking.
And yet, it was also used in the hard off-road driving of RALLY50 competitions, such as opening the straight dirt at full throttle from Zero start in the forest road touring in Hokkaido, and the followability of unpaved road was also good, so it is a suspension in the area close to the ideal for the Rear suspension at present. The rear suspension is now close to the ideal.
This suspension is more expensive than the relatively inexpensive MZ366, but it is the same price as the YSS home country's MZ366. (Thailand) It is not a suspension, but a suspension of excellent domestic quality assembled by PMC, a specialized manufacturer in Awaji Island, Japan.
(This was explained to me by the manufacturer when I inquired about it when I purchased the product last year.)
PMC can also provide after-sales service for Overhauletc., so we could expect that the product would be usable for a long time.
Other Brand Products for XG250 TRICKER include OHLINS and Technics, but I think this Suspension is of sufficient quality to stand alongside them.
It is expensive, but it is a Suspension of Recommendation.
View detail
Come with heavier rated springs, preload adjusting collars, rebound adjusters and the looks
About quality and texture - The twin shocks from YSS are made from machined billet aluminium featuring an all black anodized surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - This rear suspension features a spring rate that is specific for a weight range which makes it simple to choose from the two options available. Obviously way better then the original units with there heavier rated springs, preload adjusting collars, rebound adjusters and the looks when fitted to any of the coloured Monkey 125 give that custom appearance. Products to buy together - The suspension on the Monkey 125 would have to be the worst part of this mini moto, so after the purchasing of this quality rear suspension the essential product to purchase to complete your suspension upgrade would be the YSS fork damper kit that can by purchased via the non-listed item quotation here on Webike. Difficulty of installation - The installation of the twin shocks is a simple task that took 0.5 of an hour to complete. Mechanical aptitude and the use of basic hand tools is what is required to secure the rear suspension between the frame and the swingarm. Cost performance and comparison with other products - I find the cost of all the products YSS sell to be on par when compared to what most other companies sell their products for and the twin shocks are no different. About shipping and packaging - With there being no option for sea freight or EMS for the twin shocks, I had to chose FEDEX which is priced higher then I like to usually spend on shipping. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Steering damper
Fitted to cure a high speed head shake when coming down from a wheelie. It not only cured that, but looks fantastic. Very well made and fit perfectly View detail
Installation on ESTRELLA
I replaced the NORMAL with ESTRELLA. It has just been installed and is still under adjustment, but the stability at the Corner is clearly different and I can feel the stickiness.
Installation and adjustment were both easy and added another dimension of enjoyment.
View detail
More than I expected
I think the OEM is not as good as the Large, but the ride quality has changed impressively. The cornering on mountain roads is so much smoother than the OEM. I feel like I'm getting really good at it.
Although upon closer inspection, the construction may be crude in some areas, the performance exceeds expectations.
I personally found the DeFault setting to be too stiff, so I pulled out a little Pre-road. Damping force was left as is. I will adjust it as I see how it goes.
View detail
Front and Quantity:Set
[How is it used?
GSX-S 125 2023 (DL32D), Rear is also converted to YSS at the same time.
The use of the vehicle is Light, including commuting, city driving, and day-touring.
Was the one you received as per Image?
YSSQuality as usual. No problems.
Was the installation difficult?
I asked the Shop to do this for me. The FFork oil that came with the kit seemed to have a very hard number in it. (The FFork oil included in the package seemed to be a very hard number, but it was less than one bottle, so it was supposed to be mixed with others.)
How was your experience with it?
The viscosity of the supplied FFork oil seems to be very hard. I was wondering what to do after reading other reviews, but I decided to give it a try and used a mixture of the supplied oil and OEM FFork oil.
As a result, I could feel that the system was working properly after the conversion, although I could not feel it working well in NORMAL mode for my above application.
However, the oil is definitely hard, and it does not seem to be soft or move well. On public roads, there may not be a situation in which the oil is at the full bottom.
[Included Parts:were they on?
Instruction manual, FFork oil (I forgot the volume, but not the full amount)
[Was there anything that disappointed you?
Nothing in particular. It has an adjustment mechanism, which I would like to try out in the future.
I have changed to YSS both front and rear and now have a normal suspension, which I think is safer, more comfortable and more pleasant to drive than NORMAL, including the behavior when stepping on the Gap and the overall ride quality.
View detail
Fits: SUZUKI GSX-R 125, SUZUKI GSX-R 150
GSX-S 125 is even more fun with a Shock replacement.
[How is it used?
I had an R125 and the front and rear shocks were too hard, so I replaced them immediately when I bought the S125.
Was the one you received as per Image?
It is the usual YSSQuality. No problem.
Was the installation difficult?
It was installed by Shop (AutoCenter Hirabari) at a reasonable price at the time of delivery. Thank you very much.
How was your experience with it?
We are still breaking in the shock, but unlike normal shock, we can feel the shock sinking and damping, so we can upgrade both the ride quality (when stepping on the gap in normal, the shock is lessened) and the Riding (Cornering is more stable).
[Included Parts:were they on?
INSTRUCTIONS.
[Was there anything that disappointed you?
None in particular. If I may say so, it is a limitation of the car Both Sides, but the Initial adjustment is hopeless. I would like to see an adjustment mechanism for sticky awareness in this area in Option.
If you want to experience the full potential of the GSX-S 125, we highly recommend it. It will make your motorcycle even more enjoyable.
View detail
Fits: SUZUKI GSX-R 125, SUZUKI GSX-R 150
GSX-S (R) The 125 can really come into its own & Comfort is also increased.
[How is it used?
Normal shock is not affected by my pre-road ^^^; I still had to buy a new one even though the price went up due to the recent depreciation of the yen.
Was the one you received as per Image?
YSS is the third one including other cars? It's Quality with no problems.
Was the installation difficult?
It was installed inexpensively by Shop at the time of delivery. Thank you very much.
How was your experience with it?
It is normal. The suspension does its job normally and allows you to ride comfortably and according to your will in all situations. It also complements the shortcomings of PonhangSeat to a great extent.
[Included Parts:were they on?
It may have had a stick for adjusting the Initial (I vaguely remember). (I vaguely remember.) However, as you can see in the picture, it is quite tight, so I don't know if it would be useful.
[Was there anything that disappointed you?
Nothing special in terms of performance. I have not looked at the damping, but it looks like it is too large. I haven't looked at the damping, but it seems to be as large as it is... It would be nice to have a separate adjustable damping for the advanced VERSION.
GSX-S (R) The Shock is hard (both front and back). It is more expensive, but it will be normal just by changing to this one (or another Replace product). If you ride for a long time, I would recommend it.
View detail
Installed on JA10CUB110PRO
I wanted to do something about a Front fork that was too soft and bought one that was 10mm longer than the OEM Spring but would be usable.
As a result, the 10mm longer road was applied to the Pre-road, and the posture when riding became high on the Front and low on the Rear.
A YSS 15 millimeter long rear suspension was also installed separately to improve the balance of the car body.
I used Motul #20 fork oil instead of the specified YSS #20, which I have on hand, so I think the damping is a little weak.
I am very satisfied with the spring replacement because I have converted to a front disc brake and now I have a firm grip.
View detail
Fits: HONDA CBR1100XX SUPERBLACKBIRD
Replaced again.
The DamperOil fell out about 28,000 km after the last replacement, so I replaced it again. View detail
Fits: SUZUKI GSX-R 125, SUZUKI GSX-R 150
Back Pain Countermeasure
The OEM suspension was too hard and I had back pain.
yss was introduced to improve the situation in
The result was Large success!
The extremely hard suspension became a very workable suspension.
The ride is now much more comfortable.
I changed only the rear suspension, but so far I am not concerned about the front and rear balance.
Very good suspension.
What I'm wondering is, on the WeBig product page, it said BearingMount,
In fact, it was just a bush. yss homepage has a tiny non-bearing model,
I'm not sure what to write, but I'm sure you should write it, too. so Mr. WeBig should write it down, too.
View detail
Recommended Front Suspension UpgradeParts
I asked Shop to do the installation.
If I can remove the top cap, I may be able to do the work myself. Since I will be using it in a mini circuit, I would like to change the oil viscosity depending on the time of year, so I am thinking of trying this at some point.
YSS recommends viscosity No. 30, but it is too hard for my 60kg weight! So, I use Yamaha's No. 15 for now in winter, and it feels good.
Balance is good as it is now with YSS front and back.
I can recommend it.
View detail
It rides and drives better.
Compared to the Normal suspension, the Damper works better and reduces thrust.
It also increases the sense of ground contact, which provides greater stability when banking.
My personal opinion is that if the Fork is NORMAL, the stiffer Spring
If you built the YSS Upgrade Kit, the standard Spring was a good choice.
Damping adjustment varies quite a bit from one click to the next.
It was SEVERE to find a Point that fit my taste.
View detail
Better than stock suspension
After replacing my stock exhaust with this bad boys, I can feel a total difference in terms of handling and how the bike moves on the road. The fact you can adjust the suspension to go soft or hard is a plus point! View detail
Good vibes
The replacement of the cheap suspension clearly changed the ride quality. View detail
YSS MONO LINE Rear Single Shock [MX Series] MX456 Installed on my 2022 SV 650
About quality and texture: Original YSS Shock and Feel About the feeling of use: Better suspension control with Preload, compression and rebound adjustment. Difficulty of installation: 3/5. With proper tools and a way to lift the back end of the bike with out putting it on a spool stand, it's possible to install the shocks without removing the the exhaust. Cost performance and comparison with other products: Better suspension control than the stock shocks. I was apprehensive at first as well fearing where to place the reservoir but it came with a SV650 fit bracket! About shipping and packaging: Packed and ship securely! Any concerns, cautions, or advice when purchasing: Hyper pro, Ohlins, Matrix, Nitron also sells rear suspension upgrade for the Suzuki SV650. For a price perspective YSS is the best choice amongst them with the same option in customizing the preload, compression and rebound settings that fits to the rider. View detail
Fits: KAWASAKI VULCAN650, KAWASAKI VULCAN650S
I can now ride comfortably.
The NORMAL rear suspension was stiff and hard to move, and the dumping was not very effective. This alone made it a pain to ride.
As a result of changing to this Rear shock, the ride quality has improved dramatically, with very good movement and dumping. Also, the behavior during cornering is more stable than I expected, and it is very easy to drive. It is comfortable.
As for VULCAN400S, I strongly recommend you to change to this rear shock.
View detail
Modern styling and all black finish of the shocks suits the black Monkey 125 to a tea
About quality and texture, I can confirm that the quality is great and that the material used is aluminum with a black finish for the shock body and steel with a black powder coating for the springs. About the feeling of use, I am excited to now have adjustments available via 30 levels of rebound damping, preload via the adjustable nut for when adding additional weight and the modern styling and all black finish of the rear shock absorbers suits the black Monkey 125 to a tea. Products to buy together, A fork spring upgrade would also be ideal to add to your cart to make the bike more useable in all riding conditions as the original Honda fork springs are very weak. Difficulty of installation, I can say the fitment of the rear shock absorbers was very easy due to the simple nature of the task and ease of access to the mounting nuts. Cost performance and comparison with other products, The pricing of this product is good as you are receiving a nicely styled set of shocks with high quality materials being used. Cheaper options are available from other brands but with lower quality materials. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
YSS Rear Shocks for Honda ADV 150
These shocks fit a 2023 Honda ADV 150, and package comes with additional heavy duty rear springs. Springs are simple to remove and reinstall. There is easy preload adjustment using supplied tool, as well as rebound adjustment screw using conventional flathead screwdriver. No compression adjustment screw located, but am sastified with ability to fine tune shocks by adjusting the preload and rebound in small increments. After test riding for 100+ miles, these TYY shocks appear to be well made, functional and adjustable to individual requirements. I reccommend the TTY Rear Twin Shocks as a vast improvement over stock Showa shocks View detail