Reviews
It becomes more KATANA-like.
The OEM screen is small, but if you install YOSHIMURA's WINDArmour, it will improve the parenthesis even more.
The production is also as expected of YOSHIMURA, and is so matched that it would be fine if it were OEM.
I also feel that the wind is not affected by it.
View detail
![Machine Bent GP-MAGNUM Cyclone EXPORT SPEC [Webike Limited]](https://img.webike-cdn.net/catalogue/images/124761/WR155R_21_GP-MAGNUM_SS_R73_TS.jpg)
Fits: YAMAHA WR155R
WR155R Full Exhaust System Comparison
I have tried three Full Exhaust System, PROLinerXR-1⇒DAYTONA(IndonesiaYamahaOption)⇒Yoshimura cyclone. As for the comparison of the three systems, my personal opinion is that overall they are 1st DAYTONA (IndonesiaYamahaOption), 2nd Yoshimura cyclone and 3rd XR-1. They all have their pros and cons...
XR-1 is really noisy enough to break your ears in Tunnel, and when VVA starts to work, it stalls (Gas is too thin), so it is obvious that Injection controller and fuel condition are necessary. YOSHIMURA's total balance is excellent and he is able to drive on public roads with confidence, and he is able to secure satisfactory torque and power from top to bottom. Lastly, DAYTONA is my favorite with YOSHIMURA's fee ring with higher volume. Also, it is the only one with a baffle, which allows for simple sound deadening, and the exhaust pipe is the longest of the three, which seems to secure the Torque. The difficulty level of installation is the same for all 3 Rings. However, only YOSHIMURA's Fender Eliminator has a blinker that interferes with the pipe, so it needs to be relocated. In addition, the Gasket of the middle pipe is required.
View detail
Yoshimura Magnum Carbon
셀프 장착 가능하고 소리너무 좋습니다 내바이크가 아주 다른바이크가 되엇습니다 너무 마음에듭니다 강력추천 드립니다!!!
구조변경만 되면 아주 좋을듯한데 무리없이 될꺼라생각합니다!!!
About quality and texture
About the feeling of use
Products to buy together
Difficulty of installation
Cost performance and comparison with other products
About shipping and packaging
Any concerns, cautions, or advice when purchasing
----------------------------------------------------------
You can install it yourself and the sound is great. My bike has become a completely different bike. I like it so much. I highly recommend it!!!
It would be great if the structure were changed, and I think it will be done without problems!!!
About quality and texture
About the feeling of use
Products to buy together
Difficulty of installation
Cost performance and comparison with other products
About shipping and packaging
Any concerns, cautions, or advice when purchasing
Powered by Google Translator
View detail
Fits: KAWASAKI Ninja ZX-25R
The sound is good, but … the quality is disappointing.
The volume is a little louder than OEM, and when idling, it has a nice bass sound.
The running sound is more outgoing than OEM.
However, long-time operation can cause sound fatigue.
Since it is a slip-on silencer, I can't feel the increase in power or anything like that, but I think I'm satisfied with it for the enjoyment of its appearance and sound.
I like the product, but there were many scratches and scuffs on the carbon part of the silencer end, which made me feel the quality control was low.
I have bought several YOSHIMURA Exhaust Systems in the past, but this is the first time I have ever seen something like this, which is a shame because they are expensive Parts.
View detail
Fallen cannibals
[How is it used?
Purchased considering it as a walking stick before you fall down.
Was the one you received as per Image?
The head part seems to be a bit large, but I guess it is not so when I install it.
Was the installation difficult?
Although a pattern was included when drilling mounting holes in the Sub cowl, it was difficult to align the holes, so it might be better to ask a contractor to drill the holes only.
[Included Parts:were they on?
The metronome was included with the installation instruction manual, pattern paper, etc. I copied the pattern paper in advance and used it.
[Was there anything that disappointed you?
The accuracy of the pattern may not be good enough.
View detail
Looks good
The silencer band looks good and fits well my Yoshimura Cyclone Carbon fiber exhaust. I am very happy to have bought this item View detail
Easy to use, but a little expensive
[How is it used?
I needed Wiring for the Circuit run.
There are 3 pieces in the package, so it can be used for 3 points:Drain bolt, Filler cap, and Oil Filter.
Was the installation difficult?
In the case of the 6R, the Drain bolt was wired to the Oil Pan Bolt, the Filler cap to the Bolt on the Clutch Cable Bracket, and the Oil Filter to the Bolt on the Sprocket Cover.
The Oil Filter was wrapped around the Hose Band and the Wire was passed through the Hose Band.
How was your experience with it?
Small, unobtrusive and easy to use, but a bit expensive….
I think you can get a cheaper one from another manufacturer.
The logo is so small that it is almost invisible.
View detail
Fits: SUZUKI V-STROM250SX, SUZUKI GIXXER250, SUZUKI GIXXER SF250
The old MODEL should have been good, but the new MODEL is also quite good!
YOSHIMURAR77S mounted on vstr 250sx
I really wanted the old model design, but they didn't have it in stock, so I bought the new one.
My impression when I put it on was Sound, which reminded me of the YOSHIMURA I wore in my youth.
It is a single cylinder Motorcycle, so I am satisfied with the thumping feeling.
I am glad that the design matched the car body when it was installed.
The improvement in power can be felt very much at 5.6000 rpm in the middle speed range!
Demerit, when starting, especially with a tandem or a lot of luggage on board, I felt that the start was slower than in NORMAL.
The other thing is that After Fire is now missing more, so it happens when Downshift or when I move Access back.
Well, After Fire occurs even in NORMAL, but it's hard to hear because of the sound deadening wall, so it's not a particularly large problem.
I feel that with Carburetor Vehicles, I can reduce the amount of fuel by thickening the fuel a little....
The only other thing is that the Installation Manual was a little difficult to understand in some parts.
The rest of the details will be available on YouTube.
View detail
Great
The packaging is meticulous.
Installation is easy, requiring only a hang to peel off the old Gasket.
After the installation, a test run showed that the Torque is increased in the entire area.
It makes you want to turn it. I will turn it.
However, it is a little noisy when the Axel is opened to a large size.
When opened modestly, it accelerates reasonably well and is quiet.
Although these are expensive parts, they are carefully crafted, and you will feel a sense of ownership.
View detail
Fits: HONDA GROM
enchanting (Lol)
It was the first time I tried to replace the Exhaust System by myself, but I managed to complete it.
The Style has tightened up a lot!
I just couldn't get ECUReset to work. ( Nope.) Siksik…⇒ I'll have it looked at at my next inspection.
The sound in general was LARGER than I had imagined.
We live in a residential area, so we have to be careful about the sound of iDrink (especially in winter).
Sound is satisfied.
View detail
I bought the wrong product, please Cancellation.
Nice to meet you, Cancellation please! View detail
Fits: SUZUKI Hayabusa, SUZUKI GSX1300R HAYABUSA, SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R600
Good looking
The black color was chosen because the Swing Arm of the Type 3 GSX1300R HAYABUSA is black, and the motorcycle itself has become more austere. View detail
unexpectedly large
I like the design, it fits a lot, it's easy to wear, and there's nothing to complain about.
The photo shows it on a CT125 Rear Carrier. It is huge.
View detail
YOSHIMURA Fender Eliminator Kit
Item arrived..super fast shipping.3 days arrived.check and all item is in order.never been disappointing.highly recommend.thank you team webike.awsome job.5 ⭐ View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-8S
SDGS
Repair Parts has not been replaced in over a year and is not recommended. View detail
Cool!
I think it is the coolest of all Screen's products.
Easy to install.
Since the Cover area would be left open, I plugged it with thin plastic sheeting from Black.
The windproof effect is about as good as the bottom of the Helmet, so high speeds are now easier.
View detail
Pilot Jet
I don't know, I haven't completed setting yet.
The response was fast and helpful.
View detail
Fits: SUZUKI Gixxer SF250, SUZUKI V-Strom1000, SUZUKI GSX-S750, SUZUKI GSX-S150, SUZUKI GSX-R1100, SUZUKI GSR750, SUZUKI GSX-R150, SUZUKI GSX400 IMPULSE, YAMAHA XMAX250, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GIXXER250 SF, SUZUKI GIXXER SF250, SUZUKI V-Strom250, SUZUKI GSX250R, SUZUKI GSX250R, SUZUKI SV650X, SUZUKI SV650, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS
Yoshimura Quality
These oil filler caps are more usefull then you would initially think. The ability to torque them correctly helps prevent any venting or misting of oil from the filler on my track/race bike. They look really good with the usual Yoshimura quality. I miss the old works colour, but the grey still looks good. When installing these always use a barrier of some kind like tape, plastic or latex from an old workshop glove. This helps prevent damage on installation. Max torque is 8 - 10nm but more than that might cause some minor wear/damage, so ideally use a torque wrench. View detail
Fits: KAWASAKI Z125PRO
YOSHIMURA is the best!
I wanted the METALMagic type, but it was not in stock, so I bought the Stainless Steel Type.
The exhaust sound is not too Large and the bass is nice.
Punching holes in the Cover took a little time.
The Exhaust Band's protective tape has YOSHIMURA's logo on it, and I thought it was very detailed and elaborate.
I am satisfied with my purchase!
View detail
Fits: HONDA glom
You can experience the effect!
The details are carefully crafted.
The replacement process was relatively easy and quick.
The Torque feeling at startup will be a little thinner.
The Engine turns pleasantly after running and is solid and powerful.
However, although the sound quality is good, it might be better if the volume were a little louder in the smallest volume so that the driver would not have to worry about it when driving around town.
Also, there was a Gasket LINK on the page where I purchased the product, so I bought it together, but it was for Full Exhaust System.
I wish it had been mentioned on the product page that a joint gasket is required for the Slip-on Silencer.
View detail