Reviews
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY S, HONDA CRF250L, HONDA CRF250L S
(Current status) Dress-up 90%, functionality 10%.
SP Tadao It is a combination with PowerBox Pipe
The combination is not recommended by the respective Manufacturer and
Installation is solely under personal responsibility.
Gasket between Exhaust pipe and Silencer pipe
SP Tadao PowerBox + Normal silencer is not required.
Normal pipe + YOSHIMURAExhaust System
When
Installation Instructions Manual for each product.
Tentatively assembled.
It doesn't seem to make much sense to put it on.
Gasket was not used to do the work.
Installation takes just over an hour.
It is better to temporarily assemble the silencer band & bracket first to make progress.
The sound is LARGER than NORMAL
The sound quality is not as caged as that of NORMAL, and it has a high, clear sound.
I can feel the change itself.
I feel a bit concerned about warming up my own Apartment on the bike parking lot!
As for functionality, I just did a short run around the neighborhood,
at present
I have not been able to experience the same power output increase etc. as when the PowerBox was installed.
■Personal Evaluation
Dress-up 90%,
Functionality 10% (*Contributes to weight reduction, although no output increase can be felt)
So I have to say that Cost performance is low.
If you have a problem with Gold, it might be the first Parts you release...
View detail
Purchase Comments
Purchased in October
There was a little bit of Rose Throw when the device was used.
Currently about 2,000k since use.
Rose tsuki is getting better and better.
It becomes intense and not stable at all.
It went back and forth from 500 RPM to 2,000 RPM, and so on,
Slow Jet、
Main jet.
To be confirmed.
Used with scratches on the Driver that can be recognized as a "Hadrill".
Also
Due to lack of spare Jet
To be purchased separately.
It was a failure.
In products that I can recommend
None
You should not make a purchase based on price point alone.
View detail
Fits: HONDA Dax125
Gasket does not fit and has not been installed.
The product page said that the parts were required separately and that the Gasket could be purchased from here, so I purchased it from that page, but the part number was wrong and I could not install the Exhaust System. View detail
Fits: HONDA CB400SF Revo, HONDA CB400SB Revo, HONDA CB400SB, HONDA CB400SF
can not fit on my cb400sf revo nc42
the diameter of the yoshimura tail pipe does not fit my cb400sf original mid pipe can not plug in size of both end does not fit View detail
Fits: SUZUKI GIXXER 250, SUZUKI GIXXER SF250, SUZUKI GIXXER 250, SUZUKI GIXXER SF250
Do not purchase.
This product is supposed to have the YOSHIMURA logo engraved on the circumferential edge of the Silencer exit baffle, but the product arrived without the engraving. It is very ugly.
There is no doubt about it, as there is a picture description with engraving on YOSHIMURA's Homepage.
The GSX-250R has the same engraving, and I liked it when I owned it before, so I thought I would purchase it this time with that design included.
Whether it is WeBig's fault or YOSHIMURA's fault is irrelevant to me, but I would like to see it addressed quickly.
I have tried to request an exchange/return, but have only received a reply that it is still being checked.
Now, what will happen?
Perhaps they bought a crackpot.
It's an expensive purchase and I hope it's not too expensive.
Everyone should not make a purchase before this happens.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z400, KAWASAKI Z250
of poor quality
The silencer band is poorly made and cannot be properly attached to the silencer cover even when assembled according to the Instruction Manual. View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000
Not recommended!
As another person wrote, there is no terminal processing for LED Harness.
You must determine the polarity by yourself and connect at your own discretion.
*Manufacturer does not provide a warranty in case of polarity errors!
Of course, we're connecting them at the discretion of the operator.
Trouble due to Waterproof processing defects should also not be done by the Manufacturer!
The size of the LED-side Harness and Body-side Harness are different.
If the harness size of the terminal is the same on the LED side and the body side, I feel that there is no denying the possibility of crimp failure.
I have a 3M MINI ClampWireMountPlug 37103-3122-000 FL on the LED side.
MINI ClampWireMountSocket 7303-3163-000 FL is processed on the Body side.
Self Fuser Tape was wrapped around the surface to make it waterproof.
The MINI ClampWireMount can be installed with a pliers tool and is useful for changing the size of the harness between Male and Female.
I would like to request that if the product is sold as a kit, it should at least come with a terminal.
View detail
Belt, loose.
The Belt is loose and not easy to use at all. View detail
Fits: KAWASAKI Z125PRO
not compatible with the model year
The overall rating is one star because I had to return the product because it was not compatible with the year and could not be installed.
No effect, Sound also, as it is not possible to evaluate the effect.
I gave it one star because I have not installed it yet.
I really like the YOSHIMURAExhaust System.
I am very disappointed that I could not install it.
There was a lot going on, but WeBig was very attentive.
View detail
LCD cracked within a week of installation.
I asked for an Objection, but the Manufacturer complained and insisted that it was not bad! Ohisan Nishi-Nishi, I wish you would stop doing business like this.
Warranty is meaningless for what it's worth. 。 YOSHIMURA under the sun only responds in a ghastly way. 。 It's not even a rip-off. 。 I am so angry that I can't sleep.
View detail
(LOL)
I ordered in September 2021 and still have not received it … (202) (As of March 2, 2012)
I'm going to wait and see if I can't get a Cancellation!
View detail
Fits: SUZUKI Hayabusa
I can't get them to respond.
I confirmed that it was overdue for arrival, but I still haven't received a response. View detail
Immature as an industrial product
The Button battery is unusually difficult to insert, and if you insert it incorrectly, the LCD panel will crack.
I've heard that a lot of people have broken them because they were put in wrong, but there is no improvement at all. Of course, they don't offer any compensation, so people just cry themselves to sleep.
View detail
So bad
I received the product, but the middle side was bent.
Are they inspecting the products properly?
I will never buy from here again.
View detail
Fits: SUZUKI Hayabusa
YOSHIMURA, no intention to sell
No feedback, no product delivered.
It seems that people who bought it directly from YOSHIMURA have received it.
And that's even though I bought it past the September release date.
So you don't want User, which you can buy cheaply.
You put in an order in August, it's late October, and the next one is December?
I feel like I'm messing with you.
In the first place, if you can't see any prospects, shouldn't you quit selling itself?
Customers who buy here felt pretty foolish.
View detail
Fits: SUZUKI Hayabusa
Delivery date has not been reached.
As of 11/1/2021, you may have to be prepared to wait for an unspecified delivery date. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
be careful about losing something
Periodic retightening is recommended.
It's gone before you know it... (Right Side missing)
Design-wise, I liked it and will repurchase, but... it's not cheap.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X
Believe it or not, even with the OEM Exhaust pipe and a new Gasket, I have exhaust leaks!
This Exhaust System has a good sound and performance.
WR250X, FMFQ4 and PowerPipe2Quantity to run through the Winding today.:I combined this with the OEM Exhaust pipe from Set and a new Gasket.
However, it is an exhaust leak from the joint part of Exhaust pipe and Mid pipe as expected. It is a considerable quantity.
I tried using MORIWAKILiquid Gasket to fix the problem, but it didn't work at all, even when I tightened the clamp.
I got rid of the box, mounting scratches, a little burn color and I can't return this stuff.
I'm already going to complain to Yoshimura and Webig at the end of the week.
I've never had a Pipe that leaked so much exhaust.
By the way, the same one I bought before has no exhaust leak at all with OEM exhaust pipe and new Gasket. This time the one I bought from Webig leaks.
What do you mean? I'm hoping for a response in the future.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI ZEPHYR1100, SUZUKI 250SB, HONDA , HONDA CB750Four, HONDA XR250, HONDA FTR223, HONDA NSF100, HONDA NSF100
No returns accepted.
I bought 4 of the same thing, and opened only 1pc. to check the Size, and sent it back for a return because I could not use it by checking the Size, but it was said that the return was not accepted. Originally, it was wrapped in Vinyl, and it was sent in the state that it was stopped with the wrap in the Corrugated cardboard side and was not in the Package of YOSHIMURA especially. I sent it back with the same packaging, but what do you mean that you don't accept returns? View detail
The whole thing is so dark that I bought L-AB, which is lighter overall.
I looked at Graph and bought L-AB, which is thinner overall, especially since summer is darker. Before I bought it, I called Yoshimura and asked them about it, but they said they couldn't tell until I put it on. I don't know which one I should buy without asking how much it changes with AFR because I am using C and it is especially thick above 15% AFR.
Anyway, I bought it and put it on, and it became very thin. The AFR went from 11.5~12 to about 15 at 25% throttle. So I lowered the clip setting by 2 steps, but it got better at lower RPMs, but not much over 15%. At this point it became Garbage.
Please take Data firmly if you are considering the purchase. It becomes Waste even if you buy it with the sense that is not good like this feeling somehow! If you can run there with Nozzle that you are using now, I think it will be Waste if you don't buy something with Graph close to it.
YOSHIMURA, you sell high, so get a grip! I've given up on MJN!
View detail