Reviews
Fits: KAWASAKI Ninja H2, KAWASAKI H2 SX, KAWASAKI H2 SX SE
Reusability is the key to Large
Surprised at the dirtiness of OEMCleaner after 5,000 km, he chooses K&N, which can be reused.
The other company's product had a wider Cleaner section, and I was worried when I purchased it, but I had the experience that too much efficiency was not a good aspect,
There was a large difference in cosmetics, so I went with this one.
I check regularly, but the whole area is not dirty, but partially dirty.
I think there is a replacement Merit since it is not disposable.
View detail
Fits: HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All
New Screw holes need to be drilled!
CBR600RR (BC-PC37) It was used on a 2003 Japanese specification.
The air cleanerBody is held in place by two claws and three screws.
However, as for MinusPoint, the screw hole in the middle of the Air cleanerBody was gapped about 5mm in front, so I re-drilled the hole and fixed it myself.
I think it is well made because it is called "YOSHIMURA".
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
Economical for repeated use
The ECU is rewritten and the OEMAir cleaner is replaced,
The startup is now Torque fully and the Accelerator operation is lighter.
I could feel the effects.
I am now looking forward to Large change, such as rapid touring.
View detail
Fits: DUCATI SCRAMBLER CLASSIC 803cc All, DUCATI SCRAMBLER FULL THROTTLE 803cc All, DUCATI SCRAMBLER ICON 803cc All, DUCATI SCRAMBLER URBAN ENDURO 803cc All, DUCATI SCRAMBLER CLASSIC 803cc All, DUCATI SCRAMBLER FLAT TRACK PRO 803cc All, DUCATI SCRAMBLER FULL THROTTLE 803cc All, DUCATI SCRAMBLER ICON 803cc All, DUCATI SCRAMBLER SIXTY2 399cc All, DUCATI SCRAMBLER URBAN ENDURO 803cc All, DUCATI MONSTER 979 803cc All
For the time being! Does not fit any year after Minor change!
[Notes]
Our ICON 2020 model, SCRAMBLER ICON 803cc All However, it did not fit! In the first place, the fixing method had changed considerably.
However, since the ?2016MODEL, the filter part is still large, but the mounting part is now compact, so it can be installed with some modification.
If you don't have a problem with that, then it can be installed on any MODEL after 2017!
There may be compatible Parts in the first place, so please look for them!
[regarding effects].
Compared to the NORMAL (dry type), it has a shape that seems to increase intake efficiency
The wet point also seems to be good for Engine … atmosphere!
After the installation, I feel that the blow-off has become smoother, but it may be just my imagination.
I have a feeling fuel economy will be somewhat worse.
Intake sound is not particularly loud.
[Others]
The air filter requires the removal of the regulator, oil cooler, and canister filter, but it is not necessary to remove them completely. (Temporary fixing with needle gold or curing tape is recommended to prevent cords from being damaged.)
To remove the lid of the Air Filter Box T20." Size's pattern cannot be removed without a longer Torx driver. There is plenty of room for the pattern if it is 10 cm long.
View detail
Fits: YAMAHA WR250R 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All
WR250X or R
WR250X
K&N:Filter cleaner
K&N:Filter oil
K&N:Sealing Grease
K&N:Replacement air filter
Other famous examples would be Twin air....
We chose K&N because we had been using K&N even when we were in ESTRELLA, and because the Sponge-type filters do not change in appearance from NORMAL.
For installation at the time of purchase, the Filter is already soaked with Oil, so there is no need to soak it anew.
Remove the Bracket for the lock and replace the Filter.
Apply Sealing Grease to the oval intake area between the Motorcycle and Filter to improve adhesion.
Put the lid on and attach the Seal to complete the process!
There are many people who have installed Diaphragm Pump and Solenoid Valve to improve the intake efficiency of WR250X, but I think that there are many people like me who are hesitant to install a custom system that cannot be undone.
If you really want to, why not just remove this lid?
Then if I don't get the results I want, I can simply install the lid again and put it back on.
To clean the filter, spray filter cleaner and leave it for a while until the dirt is removed....
Then rinse off the Cleaner component with water and let dry. (I left it in the sun for about a day.)
Then, soak the filter oil to complete the process.
The color of the Fold of the Filter looks like Pink, but when washed with Cleaner, the Color:Gray.
Because the color of the oil is pinkish, it turns pink when soaked.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
Air cleaner
Increased intake efficiency and improved fuel economy.
I feel like I have more horsepower.
View detail
Fits: HONDA GROM 125 125cc All, HONDA MSX125 125cc All, HONDA GROM 125 125cc All, HONDA MSX125 125cc All, HONDA MSX125 125cc All, HONDA MSX125 125cc All, HONDA GROM 125 125cc All
I can use it over and over again.
It can be used repeatedly, so the cost is good as a result.
It is easy to install and can be installed without any modification.
I can't experience anything in particular, but I personally use the same manufacturer's air cleaner as the other motorcycles I own, so it's easy to reuse the maintenance kit.
View detail
Fits: YAMAHA WR250R 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All
You shouldn't be driving off-road.
Well, I got on a roll and went out for forest road touring with WR250x from this morning, but there was an incident that worried me a little. We ran off-road with this Air Filter for a test, but as expected, dust and sand adhered to the inside of the Air Filter.
If you are going to run off-road, I think a wet air filter is the way to go.
So I will use this one to run only On road.
View detail
Good Sound
This is a replacement for the OEM air cleaner.
Exhaust System is with Yoshimura cyclone.
I also wanted to increase the intake air to give it a little more power.
What has obviously changed is the sound.
The sound when I open the Axel is Parenthesis good.
I'm tempted to blow on it lol.
It just needs a Carburetor burnout.
View detail
Can be cleaned and used over and over again
I used it on a previous Motorcycle
The good news is that you can use it as many times as you like with the optional Cleaning & OilKit
This time I installed it on the Africa Twin, and this motorcycle is a BigOff But the air filter is dry like an on-road motorcycle
It's a little difficult to install and remove, but Off-road motorcycles can do it I think it would be better to switch to this K&N wet
There are some K&N's, but the installation accuracy is slightly gapped, but it can be installed
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI H2 SX, KAWASAKI H2 SX SE
Cost performance is the best
As of October 2019, YOSHIMURA YOSHIMURA K&NAir Filter Item #:KA-9915 is sold for H2, but H2SX 2018 It worked fine for the year
YOSHIMURA is handling and Parenthesis comes with a good sticker I felt that the point of being there was a good deal
The details are still a little BALI on the edge of the Rubber and from the mesh of the Filter Some of the threads were showing, but the air cleaner box fit nicely and functioned as a feature is perfectly fine, I think, until you can feel whether or not the Power goes up compared to NORMAL It wasn't
As for the H2 series, the air filter is very small for being equipped with Super charger I think it is better to wash it once every 5,000km because it seems to get dirty easily
View detail
Fits: DUCATI XDIAVEL S 1262cc All, DUCATI XDIAVEL 1262cc All, DUCATI PANIGALE R 1198cc All, DUCATI MULTISTRADA 950 937cc All, DUCATI MULTISTRADA 1200S DAIR 1198cc All, DUCATI MULTISTRADA 1200S DAIR 1198cc All, DUCATI MULTISTRADA 1200S 1198cc All, DUCATI MULTISTRADA 1200S 1198cc All, DUCATI MULTISTRADA 1200S 1198cc All, DUCATI MULTISTRADA 1200 PIKES PEAK 1198cc All, DUCATI 959 PANIGALE 955cc All, DUCATI 959 PANIGALE 955cc All, DUCATI MULTISTRADA 1200 1198cc All, DUCATI MULTISTRADA 1200 1198cc All, DUCATI MULTISTRADA 1200 1198cc All, DUCATI MULTISTRADA 1200 ENDURO 1198cc All, DUCATI MULTISTRADA 1200 ENDURO 1198cc All, DUCATI MULTISTRADA 1200 PIKES PEAK 1198cc All, DUCATI 1299 PANIGALE S 1285cc All, DUCATI 1299 PANIGALE R 1285cc All
Cheaper and longer lasting than OEM?
MULTISTRADA 1000DSEnduro has reached 15,000km, so I replaced it other (esp. people)
It's cheaper than the OEM air filters, and as long as it's maintained, it's semi-permanent So I think this is the best one for the cosmetic reasons
Installation is just a replacement for the OEM, but hold the OEM air filter The plastic frame of this Air Filter is too thick to fit well
Other than that, I'm happy with no other problems
View detail
The low torque will not fall off and the Axel's luck will be better
First of all, it can be installed on a CRF250rally 19 year MODEL with no problems
SP Tadao Exhaust Manifold + YoshimuraExhaust System + K& I thought the gas would become thinner with the NFilter, but so far there have been no problems It is balanced
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
It's better looking than NORMAL
With the replacement of the ECU and air cleaner, the start-up will be torque fully The Accelerator operation was also light, and I was able to experience the effects more than I expected
Future mountain road touring, etc., Large became a change in fun!
View detail
Fits: YAMAHA XVS950 BOLT R-SPEC 942cc All, YAMAHA XVS950 BOLT R-SPEC 942cc All, YAMAHA XVS950 BOLT R-SPEC 942cc All, YAMAHA XVS950 BOLT C-SPEC 942cc All, YAMAHA XVS950 BOLT C-SPEC 942cc All, YAMAHA XVS950 BOLT 942cc All, YAMAHA XVS950 BOLT 942cc All, YAMAHA XV950R 942cc All, YAMAHA XV950R 942cc All, YAMAHA XV950R 942cc All, YAMAHA XVS950 BOLT 942cc All, YAMAHA XVS950 BOLT 942cc All, YAMAHA XV950R 942cc All, YAMAHA XVS950 BOLT R-SPEC 942cc All, YAMAHA XV950 RACER 942cc All, YAMAHA XV950 RACER 942cc All, YAMAHA XV950 942cc All, YAMAHA XV950 942cc All, YAMAHA XV950 942cc All, YAMAHA SCR950 942cc All
A good deal in the long run
I had a Banhai Air cleaner on it, but I bought it this time along with the OEM return
I have K&N's Cleaner and Oil, so this product can be used repeatedly for long-term use In
It's a good deal if you think about it … however, I think it's slightly expensive
The surface is rougher than the OEM, but its performance as a Filter seems to be a concern
It is a little smaller than the OEM Filter
The sticker that comes with it is also Parenthesis good
View detail
Fits: BMW S1000XR 999cc Race Specific, BMW S1000RR 999cc Race Specific, BMW S1000R 999cc Race Specific, BMW S1000XR 999cc Race Specific, BMW S1000RR 999cc Race Specific, BMW S1000R 999cc Race Specific, BMW S1000RR 999cc Race Specific, BMW S1000XR 999cc Race Specific, BMW S1000R 999cc Race Specific, BMW S1000XR 999cc Race Specific, BMW S1000RR 999cc Race Specific, BMW S1000R 999cc Race Specific, BMW HP4 999cc Race Specific, BMW HP4 COMPETITION 999cc Race Specific, BMW S1000RR 990cc Race Specific, BMW HP4 999cc Race Specific, BMW S1000RR 990cc Race Specific, BMW HP4 999cc Race Specific, BMW S1000RR 990cc Race Specific, BMW S1000RR 990cc Race Specific
I think that it is very good..
I replaced it from OEM Air Filter to Racing Air Filter.
I think that the difficulty of installation will differ depending on the motorcycle, but as a work it is a simple task of opening the Air Cleaner Box and exchanging from the OEM Air Filter, so I think that it is not difficult.
Since the amount of air that overwhelmingly absorbs more than the OEM should have increased, according to that, fire and etc etc. If you adjust it I think that you can experience more effects.
Since it is also a Replace item, in terms of being able to use it many times, is not Cost performance also a good one.
View detail
Fits: SUZUKI GSXS750 749cc All, SUZUKI GSR750 750cc All, SUZUKI GSXS750 749cc All, SUZUKI GSXS750Z 749cc All, SUZUKI GSXS750 749cc All, SUZUKI GSR750 750cc All, SUZUKI GSR750 750cc All, SUZUKI GSR750 750cc All, SUZUKI GSR750 750cc All, SUZUKI GSR600 600cc All, SUZUKI GSR750 750cc All, SUZUKI GSR600 600cc All, SUZUKI GSR600 600cc All, SUZUKI GSR600 600cc All, SUZUKI GSR600 600cc All, SUZUKI GSR600 600cc All
It was worth replacing.
I exchanged YOSHIMURA's Exhaust System two months ago when I exchange the Air cleaner, but when I idling
Rotation speed during low speed running was not stable, well Well it did not cause the engine to stall
I did not care too much, but I can purchase it cheaply at Sale exactly so I tried purchasing things
It took about two months from purchase to arrival is dissatisfied if it is said to be dissatisfied,
I tried installing while looking at the handling Instruction Manual, because there is no Tank Bracket, I changed the stick appropriately
It took about an hour because it was a work that I made and could not use.
If you change the engine after replacing Idling is stable like a lie,
The next day I went to Touring but the Engine was stable, both Idling and slow running.
I do not feel it as an amateur as to whether the performance has been upgraded, but the engine speed will surely stabilize.
View detail
Fits: KAWASAKI ZX6RR NINJA 600cc All, KAWASAKI ZX6R NINJA 636cc All, KAWASAKI ZX6RR NINJA 600cc All, KAWASAKI ZX6R NINJA 636cc All
Instruction Manual is English version, BALI is also abundant.
Purchased for ZX-6R.
I was wondering why it bothers me why it bothers me that it bothers me that the Rubber's BALI was abundant and the Instruction Manual was the English Version.
By the way, washing solution, supplement Oil is not included.
Cleaning solution and supplement Oil were attached to Air cleaner which had been sold as K & NBrand before.
View detail
Fits: HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR ABS 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR ABS 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR ABS 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR ABS 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600 RA 600cc All, HONDA CBR600RR ABS 599cc All, HONDA CBR600 RA 600cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All
Changed?
I thought that it would be this if I take NORMAL's Gold net.
It was difficult to install, I felt it was not beautiful when I gap a little.
NORMAL 's need to anticipate occasionally because it was not countermeasured against Bolt' s creation that Bolt will not fall out even if Bolt is loose.
If you take the Gold web of NORMAL Filter, it may not be necessary for this ...
Perhaps it has changed quite a bit.
If you change Computer with Full power it would be better to attach this.
View detail
Fits: KAWASAKI 1400GTR, KAWASAKI ZZR1400
It combined with the Exhaust System!
【What made you decide the purchase?】
I was using OEM Product about 10,000 kilos so I was considering exchanging.
Certain Oak Stations etc etc. But it seemed to be cheap, but because it is part related to performance
I was looking for it by a neat manufacturer. Then find a thing with YOSHIMURA's name in K & N
The Exhaust System is sometimes called USYOSHIMURAR - 77 Slip - on Silencer, so is it good compatibility?
I decided on this product.
【How was it actually used?】
I do not know if I get used to getting used to it, but when I get on after the exchange
I felt Response got better.
Although I felt like CUB the moment when I first put on Engine after the exchange, when I do it one time
Blowing up and Response felt pleasant.
I am satisfied with Kole also compatibility with the Exhaust System ??.
【Was it difficult to install? (Hard parts case)】
Since it is ZZr 1400, removing Cover is somewhat troublesome, but since the mounting of parts is compatible
There was no problem.
As expected, K & N, or Size without any problem, if you apply a small amount of attached Grease and install
Airtightness is perfect impression.
【Please tell me the point of installation and hang (in the case of Hard parts)】
I do not have anything particular, but I think Grease is enough for a small amount.
Although the attached Grease is large in quantity, it seems to be painted when Smallly Filter cleaned
I think that small amount of application is good at once.
[Is there anything I was disappointed about?]
Nothing in particular.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Since it is DoubleName, if you compatibility with the Exhaust System also PR, if you know the car performance UP
I'm happy.
【Have you compared items?】
I also considered DNA, SIMOTA, Pipercross.
[Others]
Besides K & N's Sticker, DoubleName's Sticker with YOSHIMURA is also included.
It is recommended that there are colors and Gold and Premium feeling.
View detail