Reviews
Easy to use, but a little expensive
[How is it used?
I needed Wiring for the Circuit run.
There are 3 pieces in the package, so it can be used for 3 points:Drain bolt, Filler cap, and Oil Filter.
Was the installation difficult?
In the case of the 6R, the Drain bolt was wired to the Oil Pan Bolt, the Filler cap to the Bolt on the Clutch Cable Bracket, and the Oil Filter to the Bolt on the Sprocket Cover.
The Oil Filter was wrapped around the Hose Band and the Wire was passed through the Hose Band.
How was your experience with it?
Small, unobtrusive and easy to use, but a bit expensive….
I think you can get a cheaper one from another manufacturer.
The logo is so small that it is almost invisible.
View detail
so so
There are many inexpensive Microfiber Cloths nowadays, but they are priced at about 1,200 yen, which is a strong price.
I wiped up the Ta Brett that was fogged up with hand grease with Dry, and it was clean without being spread out, but I think this area is the same for micro fiber as well.
Compared to Micro, Merit has almost no fur, so it is less likely to hold debris and Garbage, and the volume of the fabric is also less, so it is easier to carry in Touring.
I don't know how it will look in the long run, but I cut it to test it out and it is indeed clean on the end face with no fraying.
It is a good product, but I would like it to be a little cheaper because it is a consumable item and I need a number of them.
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI H2 SX, KAWASAKI H2 SX SE
Reusability is the key to Large
Surprised at the dirtiness of OEMCleaner after 5,000 km, he chooses K&N, which can be reused.
The other company's product had a wider Cleaner section, and I was worried when I purchased it, but I had the experience that too much efficiency was not a good aspect,
There was a large difference in cosmetics, so I went with this one.
I check regularly, but the whole area is not dirty, but partially dirty.
I think there is a replacement Merit since it is not disposable.
View detail
Fits: HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All, HONDA CBR600RR 599cc All
New Screw holes need to be drilled!
CBR600RR (BC-PC37) It was used on a 2003 Japanese specification.
The air cleanerBody is held in place by two claws and three screws.
However, as for MinusPoint, the screw hole in the middle of the Air cleanerBody was gapped about 5mm in front, so I re-drilled the hole and fixed it myself.
I think it is well made because it is called "YOSHIMURA".
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
Economical for repeated use
The ECU is rewritten and the OEMAir cleaner is replaced,
The startup is now Torque fully and the Accelerator operation is lighter.
I could feel the effects.
I am now looking forward to Large change, such as rapid touring.
View detail
Fits: DUCATI SCRAMBLER CLASSIC 803cc All, DUCATI SCRAMBLER FULL THROTTLE 803cc All, DUCATI SCRAMBLER ICON 803cc All, DUCATI SCRAMBLER URBAN ENDURO 803cc All, DUCATI SCRAMBLER CLASSIC 803cc All, DUCATI SCRAMBLER FLAT TRACK PRO 803cc All, DUCATI SCRAMBLER FULL THROTTLE 803cc All, DUCATI SCRAMBLER ICON 803cc All, DUCATI SCRAMBLER SIXTY2 399cc All, DUCATI SCRAMBLER URBAN ENDURO 803cc All, DUCATI MONSTER 979 803cc All
For the time being! Does not fit any year after Minor change!
[Notes]
Our ICON 2020 model, SCRAMBLER ICON 803cc All However, it did not fit! In the first place, the fixing method had changed considerably.
However, since the ?2016MODEL, the filter part is still large, but the mounting part is now compact, so it can be installed with some modification.
If you don't have a problem with that, then it can be installed on any MODEL after 2017!
There may be compatible Parts in the first place, so please look for them!
[regarding effects].
Compared to the NORMAL (dry type), it has a shape that seems to increase intake efficiency
The wet point also seems to be good for Engine … atmosphere!
After the installation, I feel that the blow-off has become smoother, but it may be just my imagination.
I have a feeling fuel economy will be somewhat worse.
Intake sound is not particularly loud.
[Others]
The air filter requires the removal of the regulator, oil cooler, and canister filter, but it is not necessary to remove them completely. (Temporary fixing with needle gold or curing tape is recommended to prevent cords from being damaged.)
To remove the lid of the Air Filter Box T20." Size's pattern cannot be removed without a longer Torx driver. There is plenty of room for the pattern if it is 10 cm long.
View detail
Fits: YAMAHA WR250R 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All
WR250X or R
WR250X
K&N:Filter cleaner
K&N:Filter oil
K&N:Sealing Grease
K&N:Replacement air filter
Other famous examples would be Twin air....
We chose K&N because we had been using K&N even when we were in ESTRELLA, and because the Sponge-type filters do not change in appearance from NORMAL.
For installation at the time of purchase, the Filter is already soaked with Oil, so there is no need to soak it anew.
Remove the Bracket for the lock and replace the Filter.
Apply Sealing Grease to the oval intake area between the Motorcycle and Filter to improve adhesion.
Put the lid on and attach the Seal to complete the process!
There are many people who have installed Diaphragm Pump and Solenoid Valve to improve the intake efficiency of WR250X, but I think that there are many people like me who are hesitant to install a custom system that cannot be undone.
If you really want to, why not just remove this lid?
Then if I don't get the results I want, I can simply install the lid again and put it back on.
To clean the filter, spray filter cleaner and leave it for a while until the dirt is removed....
Then rinse off the Cleaner component with water and let dry. (I left it in the sun for about a day.)
Then, soak the filter oil to complete the process.
The color of the Fold of the Filter looks like Pink, but when washed with Cleaner, the Color:Gray.
Because the color of the oil is pinkish, it turns pink when soaked.
View detail
under consideration
It is not a MONKEY. 。 I bought the company's Oil catch but bought it to study the installation method. I am still considering it. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
Air cleaner
Increased intake efficiency and improved fuel economy.
I feel like I have more horsepower.
View detail
Fits: HONDA GROM 125 125cc All, HONDA MSX125 125cc All, HONDA GROM 125 125cc All, HONDA MSX125 125cc All, HONDA MSX125 125cc All, HONDA MSX125 125cc All, HONDA GROM 125 125cc All
I can use it over and over again.
It can be used repeatedly, so the cost is good as a result.
It is easy to install and can be installed without any modification.
I can't experience anything in particular, but I personally use the same manufacturer's air cleaner as the other motorcycles I own, so it's easy to reuse the maintenance kit.
View detail
Fits: YAMAHA WR250R 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All, YAMAHA WR250X 250cc All, YAMAHA WR250R 250cc All
You shouldn't be driving off-road.
Well, I got on a roll and went out for forest road touring with WR250x from this morning, but there was an incident that worried me a little. We ran off-road with this Air Filter for a test, but as expected, dust and sand adhered to the inside of the Air Filter.
If you are going to run off-road, I think a wet air filter is the way to go.
So I will use this one to run only On road.
View detail
YOSHIMURAThrottle Wire TMR
I bought it because I couldn't afford OEMWire when I changed TMR. 5 years later, it hasn't deteriorated. View detail
Good Sound
This is a replacement for the OEM air cleaner.
Exhaust System is with Yoshimura cyclone.
I also wanted to increase the intake air to give it a little more power.
What has obviously changed is the sound.
The sound when I open the Axel is Parenthesis good.
I'm tempted to blow on it lol.
It just needs a Carburetor burnout.
View detail
Good product
I was troubled with the Large Size, but I chose the Small Size, which seems to be easy to use.
We use it as an entrance Matte so that it is always visible.
It's well made and I think it's a good cosmetic product.
View detail
It can be used for many things.
The best feature is that it can be cut to any large size and it doesn't come loose even if you cut it with Scissors. View detail
If you like YOSHIMURA, you're in for a treat!
I wanted a Large size RACING Matte for the first time, but I bought the Small size because the place where I put the motorcycle has a roof, but the ground gets wet when it rains, so I bought the Small size. It's Yoshimura after all!
Cool! I'm sure you'll be able to find a good functional product with a non-slip rubber-like material on the back, but
The surface treatment feels a bit crass. But considering the price, it's not a problem.
By the way, I made the lower part of the motorcycle in Matte style by myself, but it took me a whole day to draw it. It was cheaper to buy it.
View detail
Can be cleaned and used over and over again
I used it on a previous Motorcycle
The good news is that you can use it as many times as you like with the optional Cleaning & OilKit
This time I installed it on the Africa Twin, and this motorcycle is a BigOff But the air filter is dry like an on-road motorcycle
It's a little difficult to install and remove, but Off-road motorcycles can do it I think it would be better to switch to this K&N wet
There are some K&N's, but the installation accuracy is slightly gapped, but it can be installed
View detail
Fits: KAWASAKI Ninja H2, KAWASAKI H2 SX, KAWASAKI H2 SX SE
Cost performance is the best
As of October 2019, YOSHIMURA YOSHIMURA K&NAir Filter Item #:KA-9915 is sold for H2, but H2SX 2018 It worked fine for the year
YOSHIMURA is handling and Parenthesis comes with a good sticker I felt that the point of being there was a good deal
The details are still a little BALI on the edge of the Rubber and from the mesh of the Filter Some of the threads were showing, but the air cleaner box fit nicely and functioned as a feature is perfectly fine, I think, until you can feel whether or not the Power goes up compared to NORMAL It wasn't
As for the H2 series, the air filter is very small for being equipped with Super charger I think it is better to wash it once every 5,000km because it seems to get dirty easily
View detail
Fits: DUCATI XDIAVEL S 1262cc All, DUCATI XDIAVEL 1262cc All, DUCATI PANIGALE R 1198cc All, DUCATI MULTISTRADA 950 937cc All, DUCATI MULTISTRADA 1200S DAIR 1198cc All, DUCATI MULTISTRADA 1200S DAIR 1198cc All, DUCATI MULTISTRADA 1200S 1198cc All, DUCATI MULTISTRADA 1200S 1198cc All, DUCATI MULTISTRADA 1200S 1198cc All, DUCATI MULTISTRADA 1200 PIKES PEAK 1198cc All, DUCATI 959 PANIGALE 955cc All, DUCATI 959 PANIGALE 955cc All, DUCATI MULTISTRADA 1200 1198cc All, DUCATI MULTISTRADA 1200 1198cc All, DUCATI MULTISTRADA 1200 1198cc All, DUCATI MULTISTRADA 1200 ENDURO 1198cc All, DUCATI MULTISTRADA 1200 ENDURO 1198cc All, DUCATI MULTISTRADA 1200 PIKES PEAK 1198cc All, DUCATI 1299 PANIGALE S 1285cc All, DUCATI 1299 PANIGALE R 1285cc All
Cheaper and longer lasting than OEM?
MULTISTRADA 1000DSEnduro has reached 15,000km, so I replaced it other (esp. people)
It's cheaper than the OEM air filters, and as long as it's maintained, it's semi-permanent So I think this is the best one for the cosmetic reasons
Installation is just a replacement for the OEM, but hold the OEM air filter The plastic frame of this Air Filter is too thick to fit well
Other than that, I'm happy with no other problems
View detail
No problem to use
I wanted a YOSHIMURA Matte from before, but only Large size I was not able to get a hand because the price was over 10,000 Recently, I know that there is this Small Same-Size, I bought it in almost immediate decision
As you can see in the image, we use it as a front door matte in our house (we put Sandals on it) See Yoshimura's Logo TensionUp every time!
The price is high for Matte, but I think it's a bargain if you consider it a YOSHIMURA product It is
I thought it would be good as a matte for tools, etc. Muscle!
View detail