Reviews
Purchase Comments
Purchased in October
There was a little bit of Rose Throw when the device was used.
Currently about 2,000k since use.
Rose tsuki is getting better and better.
It becomes intense and not stable at all.
It went back and forth from 500 RPM to 2,000 RPM, and so on,
Slow Jet、
Main jet.
To be confirmed.
Used with scratches on the Driver that can be recognized as a "Hadrill".
Also
Due to lack of spare Jet
To be purchased separately.
It was a failure.
In products that I can recommend
None
You should not make a purchase based on price point alone.
View detail
(LOL)
I ordered in September 2021 and still have not received it … (202) (As of March 2, 2012)
I'm going to wait and see if I can't get a Cancellation!
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI ZEPHYR1100, SUZUKI 250SB, HONDA , HONDA CB750Four, HONDA XR250, HONDA FTR223, HONDA NSF100, HONDA NSF100
No returns accepted.
I bought 4 of the same thing, and opened only 1pc. to check the Size, and sent it back for a return because I could not use it by checking the Size, but it was said that the return was not accepted. Originally, it was wrapped in Vinyl, and it was sent in the state that it was stopped with the wrap in the Corrugated cardboard side and was not in the Package of YOSHIMURA especially. I sent it back with the same packaging, but what do you mean that you don't accept returns? View detail
The whole thing is so dark that I bought L-AB, which is lighter overall.
I looked at Graph and bought L-AB, which is thinner overall, especially since summer is darker. Before I bought it, I called Yoshimura and asked them about it, but they said they couldn't tell until I put it on. I don't know which one I should buy without asking how much it changes with AFR because I am using C and it is especially thick above 15% AFR.
Anyway, I bought it and put it on, and it became very thin. The AFR went from 11.5~12 to about 15 at 25% throttle. So I lowered the clip setting by 2 steps, but it got better at lower RPMs, but not much over 15%. At this point it became Garbage.
Please take Data firmly if you are considering the purchase. It becomes Waste even if you buy it with the sense that is not good like this feeling somehow! If you can run there with Nozzle that you are using now, I think it will be Waste if you don't buy something with Graph close to it.
YOSHIMURA, you sell high, so get a grip! I've given up on MJN!
View detail
Fits: KAWASAKI Z1000 1000cc All, KAWASAKI Z1000 1000cc All, KAWASAKI Z1000 1000cc All, KAWASAKI Z1000 1000cc All, KAWASAKI Z1000 1000cc After VIN ZRT00DE010766, KAWASAKI VERSYS 1000 1043cc All, KAWASAKI VERSYS 1000 1043cc All, KAWASAKI VERSYS 1000 1043cc All, KAWASAKI VERSYS 1000 1043cc All, KAWASAKI VERSYS 1000 1043cc All, KAWASAKI VERSYS 1000 1043cc All, KAWASAKI ZX1000 NINJA 1000 ABS 998cc All, KAWASAKI ZX1000 NINJA 1000 ABS 998cc All, KAWASAKI ZX1000 NINJA 1000 ABS 1043cc All, KAWASAKI ZX1000 NINJA 1000 ABS 1043cc All, KAWASAKI ZX1000 NINJA 1000 ABS 1043cc All, KAWASAKI ZX1000 NINJA 1000 1043cc All, KAWASAKI ZX1000 NINJA 1000 1043cc All, KAWASAKI Z1000 1043cc All, KAWASAKI Z1000 1043cc All
I'm feeling a little unconvinced.
I was expecting this because it's Manufacturer, but Blade is crushed.
There is a distortion in the Body, too, and it is a feeling that it fits forcibly with the lid of Air cleaner.
View detail
No mounting parts included. Worst.
I've been so busy that I haven't had a chance to install it since I bought it, but when I opened the box, I found that the OEM air cleaner is supposed to be fixed, but this product didn't have a bracket for installation. The instruction manual has a picture of the bracket, but I couldn't fix it, so I put it back without replacing it. In the instruction manual, there is a picture that the bracket is attached. I'm not sure what to do. It was a HaGap product. View detail
It was never sent.
A week has gone by with inventory still in stock and the cashierless payment period has passed, and I haven't heard from you. Cancellation is not possible.
There's nothing I can do about it.
I'm rather uncomfortable with the fact that the cashless discount doesn't work and I'm being charged as is while the inventory is being checked.
View detail
Lousy rubber boot
After few months of usage the rubber boot finally give up . Not a very good quality product. Yoshimura should improve the quality of the rubber boot . View detail
Fits: SUZUKI GSXR1000 COMMEMORATIVE EDITION 999cc All, SUZUKI GSXR1000 999cc All, SUZUKI GSXR1000 999cc All, SUZUKI GSXR1000 SE 999cc All, SUZUKI GSXR1000 999cc All, SUZUKI GSXR1000 999cc All, SUZUKI GSXR1000 1 MILLION C.E. 999cc All, SUZUKI GSXR1000 999cc All, SUZUKI GSXR1000 999cc All, SUZUKI GSXR1000 999cc All, SUZUKI GSXR1000 999cc All
It is self-responsibility. - - -.
OEM PartsNo was together so purchase for GSX - S1000F!
However, with the problem of the shape of K & N Air Cleaner Na BOX lid - - -
I'm not addicted. - - -.
That's too bad.
View detail
Well it's cheap, it's ok but ...
Although I might be bad I did not check it well ...
It's a very ordinary Ronden Band.
When coming so far, I wonder if it is meaningful to sell at YOSHIMURABrand any longer. Go to home center to go buy.
View detail
Quality is too bad
I think that other people are also writing, but the quality is bad.
What I bought is that the bent parts are collapsed
I could not use the chunks at the end of the wire.
Because the amount is not too big and it is a product that can not be canceled
This time I threw it out as Garbage.
Please note when purchasing.
View detail
Is not it okay?
TMRcarburetor I bought it as a separately required item at the time of purchase, DRZ400SM was narrow anyway, Chalk lever and Throttle did not fit well, eventually I stopped Tie Wrap and became unnecessary parts. The Manual was attached, but it was difficult to read the letters with the great Small things.
View detail
Throttle Wire does not pass
Throttle Wire made by YOSHIMURA was stated that it can not be used, but Normal wire - It does not go through Wire for High Solo.
Processing bending into L-Type is bad, so it is somewhat crushed.
I forcibly spread the L-Type and passed the wire because I do not know the appropriate Wire.
It is a disappointing item though it is made by YOSHIMURA.
View detail