Reviews
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
I got a different impression than I expected.
I bought it because when I went to Hokkaido Touring, I found a lot of insects stuck in Radiator.
It's quite expensive and I've been slow to put it on since it's winter and the bugs are gone.
When I put it on, the Core was not as visible as I thought it would be, which is good because it gave a different impression.
Design is a matter of taste and I think I am just fine.
You have to run it in the summer to see if bugs get caught in it.
View detail
Fits: SUZUKI GSX-R1100, SUZUKI GSX-R1000, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R750, SUZUKI GSX-R400, SUZUKI GSX-R250/R, SUZUKI GSX-R1100, SUZUKI GSX-R1100, SUZUKI GSR250, SUZUKI GOOSE350, SUZUKI GOOSE250, SUZUKI VOLTY, SUZUKI TL1000S, SUZUKI TL1000R, SUZUKI SKYWAVE400 burgman, SUZUKI RF900, SUZUKI RF400, SUZUKI RF400
For Progress2 only
I used to have a multi-temp meter by YOSHIMURA, but it was quite old and hard to see.
I have a new Progress2, but the sensor itself is not compatible. However, the sensor itself is not compatible with the new Progress2 sensor.
The LCD of Progress2 is easy to read, and I was satisfied with it.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Yoshimura logo stands out
Installation is recommended before the Radiator fins are deformed by stepping stones or insects.
The Yoshimura logo has a strong claim, but it's cool because SEA BASS = YOSHIMURA.
Select Silver for color
The Package was also quite elaborate and beautifully packaged in a cosmetic box, I don't think you can reduce in cost there.
View detail
Updated with Version up from DigitalMulti Temp Sensor.
Before I put this on, I had an old-style DigitalMulti Temp Sensor.
The LCD was dark and hard to see in the daytime, but after replacing it with the Progress2, the LCD is easy to see in the daytime and the thickness is thinner.
I'm quite satisfied with it, but when I do a version up, I have to change from the root Sensor to the Coupler to get the Coupler to fit.
For that reason, everything had to be renewed.
View detail
I feel safe.
As expected of YOSHIMURA, it is expensive, but the quality is good enough.
RadiatorCore is easily deformed by a little Small stone or something, so I feel safer with it on.
When actually installed, the letters YOSHIMURA seem less conspicuous than I had imagined from the photo.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Measures against flying stones and insects
I also think that I made the right decision to purchase Silver based on other people's impressions.
The possibility of deformation of the core due to small stones, insects, etc. is lowered, allowing you to ride with peace of mind.
Even if stains get on it, they can be easily washed away with water.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
Stepping stone countermeasures
Fitted with anti-stepping stone protection.
It is gsx-s1000gt and cannot be installed without removing the Cowl.
Once the Cowl was removed, the rest was easy to install.
It is safe because it is designed for cooling efficiency.
YOSHIMURA's Logo is cool!
Since the Motorcycle's color is Black, the CoreProtector is
Silver to make it stand out a bit.
The Exhaust System is also YOSHIMURA, so I am very satisfied with it.
A little expensive.
View detail
YOSHIMURA PRO-GRESS2 Multi-temp Meter
Purchased because of the shape, many display functions, and the fact that it is made by YOSHIMURA. The display is easy to read. crf250lmd47 was not able to connect and display water temperature. It is good because voltage and oil temperature are displayed. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000GT, SUZUKI KATANA, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000
For peace of mind when driving on rough roads
I had installed a cheap RadiatorGuard, but when driving on rough roads, the fan was running very energetically, so I replaced it with this product.
YOSHIMURA is indeed different from the box. (Lol)
And Etching is still thin! It's nothing compared to last time. (Just brushing the surface seems to scrape off the skin.)
The opening rate is also totally different, so expect Large.
The problem is the rubber rubber that is attached to the upper hooks when installing the Radiator....... (suffering)
And, it's discreet after installation. (Full Cowl, and well, this is not a problem T_T)
I wish the mesh in the Yoshimura logo area had a higher aperture ratio.
I haven't been able to run it yet since it was installed, so I'm looking forward to it.
View detail
For Trouble Prevention
ZrX is now in the somewhat older Motorcycle category and was purchased as a Trouble prevention
It's convenient to check water temperature, voltage, and time on the screen without switching.
Easy to install
If you can remove the tank & install a USB power supply, etc., I think you will have no trouble with Level.
The bracket is a POSH ZrX series bracket. It fits nicely and I am satisfied.
View detail
Fits: KAWASAKI Z1100GP, YAMAHA YZF-R1M, YAMAHA YZF-R1, HONDA X11, HONDA VRX400 R100 ROADSTER, HONDA STEED600, HONDA STEED400, HONDA JADE, HONDA HORNET250, YAMAHA YZF-R1, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR400, YAMAHA VIRAGO400, YAMAHA VIRAGO250(XV250), YAMAHA V-MAX 1200, YAMAHA TRX850, YAMAHA YZF750SP, HONDA CBR250RR (MC22), HONDA CBR250R (MC17/19)
Sensor bolt for high-performance YOSHIMURAOil Temperature Meter
[How is it used?
I am using it with YOSHIMURA Temp meterPROGRESS1 on XJR400R.
Since this is an air-cooled 4-engine motorcycle, I thought it would be better to have a clear view of the oil temperature, so I installed this system.
I thought it would be useful in many ways to record the condition of the vehicle at that time, especially in the summer when there is an extreme power drop timing when riding all the time.
Was the one you received as per Image?
I had seen the actual product several times at the supply store, so it was as per Image.
One thing I was worried about until I bought it was the bolt system, the OEMDrain bolt was 17mm but this one was 19mm.
I wanted to buy the Sensor socket together, but there was no mention of it, so I had to do it twice.
Was the installation difficult?
In the case of XJR400R, it is easy as just replacing with OEMDrain bolt.
However, this product itself is an Aluminum Bolt, so Torque management must be done well.
The OEM drain bolt was 43 Nm, but I tightened it at 25 Nm just to be safe, and so far no leakage.
How was your experience with it?
The oil temperature is safely measured.
I checked on the Net and found that Wiring can be cut off.
It is true that it is very close to the ground near the Drain bolt, and it is likely to be hit by stones, etc., but I feel that this is not the case.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
The performance etc. is perfect, but I dislike the anodized color.
I think there are many vehicles that do not MATCH as they are quite noticeable in Red.
Black Anodizedetc. I would like to see other colors available.
Other items that would be helpful
Opinions and requests to Manufacturer:.
The XJR400R replaces the Drain bolt, while the XJR1300 replaces the Oil galleryBolt.
I would like to see the manufacturer provide the reason why the position of the sensor bolt differs depending on the model of the car.
View detail
Fallen cannibals
Instruction Manual is unfriendly, but installation is easy.
I think the Curl de- and re-attachment requires a certain amount of su-kill.
The OEM screws are used for installation, but it would be easier to install if the installation screws are replaced with ones that are about 5mm longer.
View detail
Fits: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF
Looks Good
Good looking but expensive View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R
YOSHIMURA
It is a world of self-satisfaction.
I installed it myself, but I had to remove the Intercooler and shift the Radiator to get the Upper Rubber to fit.
It was quite a hassle to spray CRC because the Rubber was slipping and Plastic's Cover was getting in the way.
If you are even doing it yourself, you may want to order the Interclar ORing separately.
View detail
Fits: HONDA CB1300SB, HONDA CB1300SF
YOSHIMURA Radiator guard installed
I was attracted to YOSHIMURA's Logo and bought it on impulse.
The product arrived in a cosmetic box and looked luxurious.
The product was well protected by packing materials.
Installation is completed with 4 screws.
The product itself is thinner than the OEM, probably to reduce weight.
But the design is good, so it is a Fashionable Guard.
It is a modest but satisfying part.
View detail
YOSHIMURA PRO-GRESS2
It is an old Motorcycle so it is better because it can monitor oil temperature and voltage. The red anodized paint of the oil temperature sensor does not match the old motorcycle, so I replaced it with one made of Brass. I wanted the Sensor Coupler to be Black instead of White because I wanted to make it as inconspicuous as possible. View detail
I would like to see a separate Cabra for each Sensor.
I replaced a KOSO Dual temp meter.
I like that it can display a voltmeter and a clock.
Since the Coupler of Sensor has the same shape, it is hard to tell whether it is Sensor A or B until each of them is connected.
Sensors are sold separately.
View detail
Pricey but good quality
[How is it used?
Fits ZX6R 2023. The fitment has not been updated, but it goes on normally.
Was the one you received as per Image?
It is thinner and lighter than I expected. The packaging was very careful and there were no scratches or distortions, just like a high brand.
Was the installation difficult?
It was more of a struggle than I expected. It was originally better to remove the cowl, but it looked like it could be attached without removing the cowl if I tried harder, so I removed and installed only the Under Cowl and LowerInner cowl.
Hook the three claws on the top of the Radiator to the edge of the Radiator and tighten them together with the Bolt that holds the Radiator in place.
Since ZX6R Radiator has a curved surface, we had to hook the nails while curving this product to some extent, but this was quite difficult.
The Horn and ABSUnit were fixed just above the Horn and ABSUnit, which were difficult to work with because they interfered with each other and the clawing was not visually confirmed, so we removed the Horn and ABSUnit.
Also, if this product is curved too much, Quantity:Pair (for Left and Right) The lower part of the "C" was floating and interfered with the cowl, so it was very difficult to control the amount of movement.
You also need to be careful not to crush Radiator's fins while working.
I think it would be better to have the fins installed at the time of delivery inspection if possible. It would be a total disaster if the fins were crushed due to the installation.
How was your experience with it?
It was difficult to install, but on the other hand, after installation, it is firmly fixed and does not make the so-called chatter sound while driving.
At first I thought the YOSHIMURA Logo might be too flashy, but I like it because it is less noticeable than I thought and can be seen if you look closely enough.
I was torn between Trickster's and other manufacturer's products, but I chose this product, which is Y-shaped and not Honeycomb-shaped, because the price was a little lower and I did not want to lose the cooling efficiency of the Radiator as much as possible.
[Included Parts:were they on?
A simple Instruction Manual and Sticker are included.
[Was there anything that disappointed you?
[Notes]
If possible, Cowl should be removed.
If the Hand Bent is set too high, the Quantity under the Radiator guard will be set too low.:Pair (for Left and Right) will float.
It is necessary to put a certain amount of effort into it, but be careful not to crush the fins.
View detail
Fits: YAMAHA XJR1300, YAMAHA XJR1300C, YAMAHA XJR1300
Oil cooler Protector
YOSHIMURA's Logo is cool. View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
YOSHIMURA
That's YOSHIMURA! You can install it with confidence! View detail