Reviews
For Dress-up of Wheel
CB250R was finally delivered and I used it for Dress-up!
And it's easier to put it up before the Wheel gets dirty.
This time, I'm going to use this product, which is a little bit expensive.
After all, there is a large difference in the image between pasting and not pasting.
I do the same task 16 times, so by the end you get used to it. lol
I used a mild detergent to apply it.
However, I did apply a sticker without text at the end.
I think this is a slightly different Image.
I put up one picture and stopped.
View detail
Easy YOSHIMURACustom Part2
It was installed as Accent on a pure BlackWheel.
The installation itself was not that difficult as it was just a matter of stretching it along the pattern.
There is also a spare for a wrong tension, so I was able to tension it with plenty of time to spare.
I thought it was a little thin for an off-road motorcycle. I thought it was a little thin for an off-road motorcycle, but I think the body color RedBlack of RALLY50 tightens up the feet and gives an overall sense of high quality.
View detail
This sticker...
Quality and Texture Information Plain Rim Stickers Yoshimura Rim stickers look special about the feeling of use Design information Made on 12-inch wheels Size Chart Information 12 Inches Cost performance and comparison with other products are much more expensive than normal rim stickers, but I am satisfied WeBike packaging is always great, arriving in a week for delivery and packaging Concerns, precautions, or advice when purchasing It is recommended to clean the wheel first and install stickers This sticker is very difficult But when it's done, you can get satisfaction View detail
That's what I'm talking about!
That's what I'm talking about, YOSHIMURA!
It was perfect!
View detail
YOSHIMURARim sticker
The YOSHIMURARim sticker makes the undercarriage look so gorgeous. View detail
Wow that's cool
If it is carefully stretched while constantly spraying water with a misting spray
Even I, a clumsy person, managed to attach it well.
It is a bit pricey, but the design is good, so it can't be helped.
Recommended for those who love YOSHIMURA.
View detail
Shape.
The R shape of the sticker is smaller than that of the SEA BASS 17in. but I can't stick the sticker on the 17in. because the material of the sticker is hard like metal sticker. The cut of the sticker is also bad, and about 3 stickers do not come off from the backing paper cleanly. View detail
One point
I think it is good for One point of suspension.
There are many colors available, but we chose the Titaniumium color.
Wheel cleaning and degreasing of the rim area were performed before applying the paste.
Perhaps because I am clumsy, I could not apply it well with water, so I applied it directly without water.
I was able to get away with sticking it a millimeter or two down from the corner of the Rim and sticking it a little bit at a time.
However, the last Quantity:When I removed the 1pc. from the backing paper to apply it, the color SEROW Han peeled off because the Cutting of the Sticker was too loose.
Originally, the reserve was Quantity:It was helpful that it came with 1 pc. but I gave it one star Minus.
Now all I need is durability.
View detail
Beautiful finish, but difficult to work with.
A beautiful Gradation rim sticker, with an indescribable color that adds to the ambience.
This is the first time I've used the Cutted Split Sticker, but the work su Kill is higher.
It is often written that anyone can do it easily, but this is not true. Furthermore, this type of sticker has a long fixing time (24 hours), so you need to leave it for a long time to get a strong adhesion.
It is better to take enough time to understand the nature of Sticker and work with it. If possible, it is preferable to use a wheel with a rim flat area of 7mm or more. If the wheel is of a type that curves outward toward the helicopter section, the sticker will hang on the curved surface and float, further increasing the degree of difficulty.
It is beautiful when done neatly and completed, but if you are not confident, this is the kind of work you want to ask Shop to do for you.
Use of Dryer is recommended if possible.
View detail
Parenthesis OK
I was a little bit excited because I thought YOSHIMURA was the best choice for SEA BASS cars.
The YOSHIMURA Logo and red lines are parenthesis and add to the sense of ownership.
There are several colors to choose from, so it will fit a variety of car models.
View detail
Hurdle expensive to put up as DIY
I saw a Mirror style Rim sticker on the street that was good for Parenthesis, so I introduced it.
I bought it because it is YOSHIMURABrand and I had high expectations, but there was an unexpected pitfall…
First of all, it is difficult to paste.
This may depend on the size of the wheel rim and the presence of coating, but it is very difficult to apply and does not stick.
And although this is a quality issue, there were many areas where the cutting was not done properly and the MirrorMaterial peeled off.
At first, I pasted it all up, but the result was, well, terrible.
Even I, who am used to attaching stickers, can see the results, so it may be tough for beginners.
If possible, you should pay Shop to do this work. The price is also high, so if you are afraid of failure, you should ask Shop to put it on.
Looks great! If you can put it up well, you will be very satisfied.
View detail
WheelBlack with YOSHIMURARedLogo is a nice touch.
I put it on the rim of my GSX1300R HAYABUSA (EJ11A) and I am satisfied with the YOSHIMURA with Logo and I think it looks good underfoot. View detail
Stylish MONKEY125 undercarriage.
The color of the goros and design is good. I was using a cheap one (880 yen), but it is different from a large one. I am sure there will be no problem with the durability of the product since it is made by YOSHIMURA. I found a video of the process of stretching the wheel by ManufacturerYOSHIMURA, which helped me a lot. View detail
OEMWheel's Easy Makeover
The texture of Sticker is very good like YOSHIMURA.
If it is a general wheel rim shape, Sticker's design can be applied beautifully without gapping, and if it is applied with water, it can be easily corrected, so it can be applied beautifully even for the first time.
View detail
MONKEY125's undercarriage is GU.
When I was looking for a rim sticker for MONKEY125 at Webig, I found ManufacturerYOSHIMURA's product. The design and texture of ManufacturerYOSHIMURA's with Logo is superb, and since I am currently using Red color Rim sticker (880 yen at Amazon.com), the appearance is not as good as it looks. It is expensive, but it matches MONKEY125 (Red color) effectively, and it is massive and tasteful. The video of how to apply the sticker is available at ManufacturerYOSHIMURA. View detail
Stable YOSHIMURA
Everyone who rides a motorcycle knows Mr. YOSHIMURA.
I was informed that they finally released Rim sticker and bought it.
It is a little thicker than Mr. MDF and easier to apply.
After removing dirt and degreasing the surface, you can apply the paste one spot at a time.
One point YOSHIMURA for the suspension, it is quite good.
View detail
Yoshimura rim sticker
No doubt that the Yoshimura rims stickers can make your bike in sharp and stylish. I have been trying to make more Yoshimura products to improve my bikes on performance then , not only for good looking. View detail
It looks pretty different.
It looks better than without Sticker. I think this is a good price. View detail