Reviews
Fits: HONDA glom
You can experience the effect!
The details are carefully crafted.
The replacement process was relatively easy and quick.
The Torque feeling at startup will be a little thinner.
The Engine turns pleasantly after running and is solid and powerful.
However, although the sound quality is good, it might be better if the volume were a little louder in the smallest volume so that the driver would not have to worry about it when driving around town.
Also, there was a Gasket LINK on the page where I purchased the product, so I bought it together, but it was for Full Exhaust System.
I wish it had been mentioned on the product page that a joint gasket is required for the Slip-on Silencer.
View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000, KAWASAKI Ninja1000, KAWASAKI Ninja1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000
Truly YOSHIMURA
I installed it on a 2015 NINJA 1000.
Installation went fine.
The sound is not so different from NORMAL? It is not so different from NORMAL.
The handling is no different.
The appearance has changed considerably.
I like it very much
View detail
Fits: SUZUKI Hayabusa
Parenthesis good!
Looks awesome Parenthesis!
Easy to install, but Left SideTandemS hole misaligned? I managed to get it on, but …...
The sound is louder than the OEM Product.
Motorcycle handling is a little lighter.
View detail
sound good
design. sound. Acceleration increases according to output~
This is a very good muffler.
However, if there is no heat sink that needs to be purchased additionally, it may not be able to handle the heat from the muffler, and the heat from the muffler end body is also at a level that cannot be ignored. I think it's mandatory to wear long pants when riding haha --------------------------------------- ------------------- design. sound. Acceleration by output ~ Very good muffler. However, if there is no additional heat sink to be purchased, the muffler will not be able to handle it, and the heat in the muffler end body is not ignored. I think long pants should be worn and ride haha Powered by Google Translator
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250L
YOSHIMURASound is the best!
I installed YOSHIMURA's Exhaust System for the first time, and I can't get enough of the sound when I open the Axel.
Design, Sound and sound quality are both excellent.
View detail
Installed on a 2022 X-MAX
I changed from NORMAL to YOSHIMURA because the exhaust sound of NORMAL was not enough and my other CROSS CUB is MORIWAKI, so I chose YOSHIMURA. Unlike CROSS CUB, it is a CVT, so when I open the Axel, it runs at more than 3500 rpm and I can't feel the low rpm range. I prefer stainless steel exhaust pipe and silencer, so I am glad to have changed them. View detail
Fits: HONDA CBR250RR
Refreshing to look at, bass resonant.
[How is it used?
Mainly for city driving and touring.
Was the one you received as per Image?
As you can see in the Image, Carbon Style was very cool!
Was the installation difficult?
I am an amateur and it took me about an hour with no problems.
Gasket installation was a bit tight, so I had to use silicon grease to get it to fit.
How was your experience with it?
I was surprised by the bass sound, which was hard to recognize in the video, although I had seen videos of other people beforehand.
Of course, the high sound at high RPM range is also very small.
Since it is not a Full Exhaust System and is used for touring, the difference in ride quality is not that noticeable.
[Included Parts:were they on?
Instruction Manual and YOSHIMURASeal are included.
The Instruction Manual is simplified, but I thought it would be easy enough to understand if you have experience with MotorcycleParts, Plastic model, or furniture assembly.
[Was there anything that disappointed you?
Nothing in particular.
View detail
Fits: HONDA CB400SB Revo, HONDA CB400SF Revo, HONDA CB400SB, HONDA CB400SF
Simple
It looks good, but it doesn't sound too loud and it's not too loud and it's not too loud. View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Required for SEA BASS cars (LOL)
To be honest, it is a Slip-on Silencer, so there is not that much change in power.
There is no dramatic change in sound quality or volume.
However, the appearance is 100 satisfactory!
I wish the price was a little lower….
View detail
Fits: SUZUKI GSX-S750
Moderate volume, good Sound and sound quality, excellent appearance
Installation was not difficult.
Instruction Manual is also kindly provided.
The volume was not as loud as expected, and the atmosphere was Gentle.
Sound and sound quality is good.
The look is already outstanding. This is the one thing I am glad I bought and replaced.
View detail
Fits: SUZUKI GSX-S750
It's Japanese Vehicle Inspection Correspondence, so I wonder if it's like this?
It is a Japanese Vehicle Inspection Correspondence, so the sound is low-pitched.
It would be helpful if the price were a little lower.
View detail
Fits: SUZUKI GSX-R1000R, SUZUKI GSX-R1000, SUZUKI GSX-R1000R
It's worth it to have it on.
I would like to see Joint's Cover made into Standard Equipment. View detail
Fits: SUZUKI GSX-R1000
Satisfactory!
Used AKRAPOVIC until now. Government-approved Exhaust System The FI warning light didn't come on and the sound was very energetic from low speed.
This sounds good enough for an approved Exhaust System.
I am glad I bought it because I don't have to replace it with NORMAL every time I inspect my car and it sounds satisfactory!
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250L
Parenthesis is good.
I am convinced that the Exhaust System of Motorcycle has to be replaced. There was an Exhaust System that I was interested in, but this time I chose YOSHIMURA.
Easy to install and looks great!
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI DL1000 V-STROM250
Good Exhaust System.
Replacement from Normal muffler.
I have the impression that the bass sound is quite effective, and the sound quality is pleasant at low RPMs and relatively race ish as the RPMs increase.
As for the feeling of acceleration, the official report says that the characteristics have been improved, and my actual impression is that it has improved, though not drastically.
I chose Carbon, and personally, it matched the Black body color and was the right choice.
View detail
Fits: SUZUKI Hayabusa
Satisfied with the texture of YOSHIMURA
After installation, the sound impression is not so different from the OEM. The GSX1300R HAYABUSA is characterized by a thick bass sound, and it blows up lightly with a good sound while retaining that characteristic. However, the appearance and lightness have changed to large size, and I am satisfied with the quality of YOSHIMURA's texture. View detail
That's Yoshimura Japan!
I found this Exhaust System from Yoshimura Japan when I was looking for custom parts because the Normal muffler looked cheap after the car was delivered last September. The installation took about an hour, including the removal of the normal muffler. The engine started up with full of energy...? Quieter than expected! The volume is about the same as the Normal muffler? As a person who goes touring early in the morning on weekends, it is good for me without disturbing the neighbors! The black color of the tail end, the sharp cut, and the fact that it is longer than the Normal muffler make the motorcycle look tighter. Also, the angle of the exhaust system and the lower line of the side case are in a straight line, which is very well calculated and designed! When I started driving, I could feel the YOSHIMURA sound different from that of a normal muffler after 5000 RPM on the highway. But compared to that, I felt it was very mild. Therefore, I do not recommend it to owners who expect a large volume, but I recommend it to owners who value the balance of the vehicle body as I do. View detail
Fits: HONDA CB400SB Revo, HONDA CB400SF Revo, HONDA CB400SB, HONDA CB400SF
Torque up comfortably and Smoothly with a calmer sound than OEM
The OEM exhaust system of CB400SB made in 2022 (2BL-NC42) has a little bit large sound and it is so loud that it might bother neighbors when warming up the engine in cold weather. Generally, I had an impression that the Slip-on Silencer is for those who want to have a large sound, but the YOSHIMURA Slip-on Silencer Cyclone has a calmer sound than the OEM. The volume itself is the same, but the impression that it is noisy is gone.
Installation is easy:simply remove the OEM Exhaust System and install as per the Instruction Manual.
However, the Bolt of the Exhaust System Hanger part of CB400SB (2BL-NC42) is with Hook, so I used the OEM one instead of the attached one.
When installing, care must be taken to locate the clamp band where it connects to the exhaust pipe.
It seems to be better to put it as far away from the exhaust pipe as possible (closer to the tail).
Even after applying liquid Gasket, the exhaust leaks just a little bit. After trying various solutions, I found that changing the position of the Clamp band solved the problem.
The sound is quiet or calm. It has a dry sound.
Power is almost the same as the OEM characteristics, but the 2nd to 3rd gear seems to have a nice connection.
Since the car has always run well, I don't feel any Large change, but it gives a Smooth impression.
This time, we decided to use a calm Titaniumium cover so as not to appeal the change of Exhaust System.
However, since YOSHIMURA's logo is a large size, I would be happy if a small size could be selected.
View detail
Fits: SUZUKI Hayabusa
I want a Full Exhaust System, but it's too expensive, so I'll settle for a Slip-on Silencer.
[How is it used?
Street Riding Main
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Other than Heat Guard, everything else was easy.
How was your experience with it?
OEM and sound is almost the same
The fee rings have become lighter with better shedding.
Even though I only ride once a week, I noticed the difference right away.
Heat Guard was very difficult to install.
The Bolt, Nut, and Band were used for installation, but it was very difficult to position them.
Overall, I am very happy with the product
View detail
Fits: HONDA CB1300SF, HONDA CB1300SB
YOSHIMURA lover
I wish the Pipe connecting Silencer and OEM was hardened if possible. View detail