Reviews
Price per piece
I think it would be good for a small accent.
However, if you say it is self-indulgent, it is sold in one.
Quantity:I bought it because I thought it was a good price for 1 set of 2pcs.
Quantity:Pair (for Left and Right) If you would like to have a Quantity:2pc. Set need to be bought.
I didn't see that mentioned in the WeBig, so ….
I had no choice but to buy another one when it arrived and I only had one.
It's a two-step process.
It seemed a bit expensive.
The product itself is good.
View detail
Maybe it's not as different as I thought...
I changed to a high seat to reduce the pain in the buttocks, so I raised the handlebar by 12mm to increase the handlebar a little because my wrists also hurt when I lean forward.
It might be easier with Normal seat. I will try to ride back to Normal seat once.
Because Owner says it has changed a lot on YouTube.
View detail
Work is LargeChange
The handlebar itself is narrower and easier to position. The problem was the installation...as is typical of all Kawasaki motorcycles, the bar end was stuck and it took more than 2 hours to disassemble the bar end. As a result, it took me a whole day and about 5,000 yen for the parts. Unless you have confidence in Kawasaki Motorcycle's maintenance, or you have secured all the maintenance parts, it is not a work that an amateur can do. Please be sure to prepare for the work before you do it. View detail
[Color] SmokeTailing
Tail. [Color] To make Smoke, the BEET [Color] I purchased the SmokeTail cover, and although it looks effective, I do not feel that it is a cost effective product. The price seems to be about 3,000 yen at most, and although motorcycle is a hobby of Genre, I wish they would set a gold price that can be afforded by the general public. View detail
Expensive but unique
Exhaust System, footpeg, and BEET were made by BEET, so we matched them.
I think the performance is not so different from other companies, but the design is one-of-a-kind.
For those who insist!
View detail
Width is nice.
Since my height is 165cm and I am small, STD Handlebar has a good height, but it is too wide and tiresome. I am considering to use Handlebar Up Spacer. I put the aluminum par end of Babyface without Weight, but I don't feel vibration at all, so I will ride as it is. View detail
Fits: KAWASAKI Z1000, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z1000, KAWASAKI Ninja 1000 (Z1000SX)
The position attached simply is also OK!
The position attached simply is also OK! View detail
Caution.
Used for HURRICANE Conti2 type. The inside diameter does not fit, so the convex part does not fit. Please be careful when installing on non-BEET handlebars. View detail
Good quality, but not seperate letters.
Quality and texture are good and I am sure they will last but it is worth noting that each of these BEET logos is printed on to a clear back ground and so each letter (B, E, E, T) and each logo is not seperate and when fitted you will have a rectangle of clear around the whole logo. In use they were simple to fit with some soapy water and very sticky. If looking for products you could buy together, there is another sheet of Beet stickers also on webike. There was no difficulty of installation, simply lift the sticker off the backing with a knife and apply. I used soapy water and something to push the air bubbles out. Very easy to worth with these are small. This set represents good cost performance and is comparable with other products, like the other Beet sticker set. To be fair for the money they are not expensive if you want a set of Beet logos. Its not normal that you can buy stickers from tuning companies like this so its great that they are available. As usual, shipping and packaging was excellent. Beet provided good original packing and Webike shipped inside a brand new collapsed cardboard box. Very good and solid so they arrived flat and undamaged. I have no concerns, cautions, or advice when purchasing, they are good value but you should just bear in mind that these are not single letters like an OEM Yamaha sticker, they are printed on a clear background. I would have preferred them seperate as the finished job would have looked better, hence 3/5 stars. View detail
Fits: その他 , HONDA APE100, HONDA APE50, HONDA CB400SF, HONDA HORNET250, KAWASAKI 250TR, KAWASAKI BALIUS, KAWASAKI BALIUS II, KAWASAKI D-TRACKER, KAWASAKI ESTRELLA, KAWASAKI KLX250, KAWASAKI ZRX400, KAWASAKI ZRX400 II, SUZUKI BANDIT1200, SUZUKI GSX1400, SUZUKI GSX400IMPULS, SUZUKI SKY WAVE SS, YAMAHA SEROW225, YAMAHA SR400, YAMAHA XJR400
Mounted on w175tr
I had it on a cb400sb but the Image didn't fit me personally, so I ported it to a w175tr.
Installation is not a problem.
Self-satisfaction, I guess.
Also, the key is harder to turn.
View detail
If you're looking for a lowdown, this is it.
If lowdown is your goal, the cheap Black painted Plate will do. The weight is almost the same as NORMAL.
The key Lowdown effect is Do you feel better now?" It was about the same change.
It's probably because lowering it further would affect Handling.
Replacing the Plate is a relatively simple part of the process, but it is recommended to have a Motorcycle shop do it as any mistake can lead to an accident.
View detail
Might make it easier to ride.
I used it because it was too hard to lean forward with the OEM.
Are you feeling better somehow?
View detail
Fits: KAWASAKI KLX250, KAWASAKI D Tracker
I changed the BEET Nozzle on my 2014 D-TRACKER-X.
In NORMAL, it seems that the Gas exhaust is limited and the Gas exhaust is thin.
So Nozzle changed from 10 hole to 12 hole and it is expected to Torque up from low speed with Smooth Gas emission.
Barrel the Exhaust System when replacing the Nozzle4 Remove the Pig Nose on the Intake
AI Cancellation Blowby gasTube and One-Way Valve installation were done at the same time;
Acceleration improvement and low speed torque up effect are …
Brushbo or something?
I changed a lot of things this time, so I don't have much experience, right?
Exhaust System Replacement Pig Nose Removal AI Cancellation eliminates the low speed torque and makes the high rpm smooth.
View detail
Not bad, I guess.
Purchased for Japanese Vehicle Inspection Correspondence when installing BEETHandlebar.
Once installed, it will be about the same length as OEM.
It is easy to install and easy to remove.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX1100, KAWASAKI ZRX1100II, KAWASAKI ZRX400, KAWASAKI ZRX400II
Easy Imechain
I love how easy it is to imeChain with just Double-sided Tape! View detail
18 years - only legal Full Exhaust System
If you want the best exhaust sound, Full Exhaust System is the best choice.
OEM Exhaust System with Large Bento Box cannot produce
It sounds wonderful.
View detail
Position Improvement
Purchased to improve Position when riding.
Originally, the NINJA400 (2020MODEL) is not that tight, but
I feel that driving fatigue has been reduced by the installation.
The only NegativePoint I can think of is that the price is high, but
Considering it's Exclusive Design, I guess I'll just have to turn a blind eye.
Even a beginner could do the installation without any problems as long as he had the tools.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z800, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z800
high
Installation was super easy.
It looked perfect.
Since the only fixed part is the lower center part
Both corners of the lower part, Left was good.
The Right corner was floating and flapping around.
I also felt the price was a bit too high.
View detail
It's not here yet, but... ・ It's not a product, it's a complaint.
The first order was placed on October 7 and the price was $159,005 for the December 23 shipping date.
ChristmasPresent! I was just about to go into it.
A few days later, I looked at the Site and it was marked as SALE 150,480
No, no, it's about 10,000 yen cheaper.
I contacted them on October 9 and they told me to cancel and reorder
I reordered it at and they said it would be delivered on January 12, 2021.
You're welcome.
I feel like I don't really care anymore.
Do I have to buy it if I find it at Lycos or something?
View detail
It's not bad.
Not bad, but the accuracy of the product is not as good as YOSHIMURA.
Insert the intermediate pipe into the Silencer, but although there is no exhaust leak, a skimmer is made.
The Gradation color is also prone to corrosion.
However, the volume and the sound quality are better than NORMAL, and it becomes light.
I bought it because I thought Kawasaki = beet, but if you are not particular about the combination and choose Slip-on Silencer, you should choose YOSHIMURA.
View detail