Reviews
Operability Up
I use it in the position of Footpeg Position 3, but I feel that the ease of riding NAKED did not change, but when I stepped on it in Corner etc., the load transfer became easy to perform and the operability improved.
The color also matches the body of the car, giving it a sense of unity.
View detail
The rigidity and the appearance have been improved.
On the occasion of SEROW purchase, because I saw the opinion that Front was not stable in Net, I thought that I would change Clamp for stability.
I was wondering between Zita's Stabilizer and BEET's ClampBrace and Zita was out of stock. I wondered if I should wait for Zita, but I ordered this one because I liked the flashy feeling of BEET better than the plain feeling of Zita. The preference is important because it is always in view.
It was not that the Handlebar was swaying, but when I added ClampBrace, it became a solid feeling as if it did not move a little in the speed range of SEROW.
The color may be more like Orange than Gold, but with the Red SEROW, it doesn't float around and looks beautiful and I really like it.
View detail
Good texture, no Black, no Instruction Manual.
I installed it to raise the ride height, to change the attitude...
What will be the changes in Handling with it.
As a result, it doesn't change much, so I guess I'll just have to get used to it.
The texture is good, it's thick and fleshed out.
I think the balance of stiffness and weight is well taken.
Gold near the center of the car isn't as bad as I thought it would be.
It's a shame that Black is not one of the standard colors.
The texture of the Anodized is good, but I'm concerned about the heat effects of the Exhaust System.
I'd like to see another LINK like Part to connect this to the body anyway.
To install, you need to hang the car body and free the Swing Arm.
If you can do that, it's relatively easy.
However, there is no Instruction Manual.
Therefore, the orientation of the product is not known.
I need to think about the structure of ride height Up/Down in comparison with the size of the hole of OEM, but I want you to describe it because it is an explanation that can be done with one word or one picture.
View detail
For adjustment of suspension replacement.
Used to correct lowered ride height due to incompatible suspension.
The amount of change was less than I expected and I think it could have been higher.
In the attached image, I installed it in the opposite direction of the specification, but the amount of change was larger that way. (At the position of Axle, the normal direction +20mm)
The Lever ratio may change, but I use it as it is because it is better than the discomfort caused by the excessive drop in ride height in the regular direction.
The orientation could have been stamped with a narrower gap between the holes, front, arrow etc.
It's a shame that RACINGLINK doesn't have the Black setting that Lowdown has.
I had to put a collar between the end eye, but this was hard to install, I wanted it to be welded.
View detail
Position Improvement
Purchased to improve Position when riding.
Originally, the NINJA400 (2020MODEL) is not that tight, but
I feel that driving fatigue has been reduced by the installation.
The only NegativePoint I can think of is that the price is high, but
Considering it's Exclusive Design, I guess I'll just have to turn a blind eye.
Even a beginner could do the installation without any problems as long as he had the tools.
View detail
Was good
I'm so glad I bought it, it's well worth the price! View detail
HandlebarUpSpenser6mm thick.
The instruction manual is hard to understand, but if you know the structure, you can finish the assembly in a short time. I chose the 6mm up one, but this height is just right. View detail
BEET BEET Hard Spring Kit for Front Fork
I bought this because my OEM Product Spring broke.
I'm happy with the FeeRing, it's a bit stiff as described.
View detail
BEET
I installed it on October 25.
I liked the sound of the Normal muffler, but the silencer was too large and I wanted to change it, so I bought the JMCA Certified from BEET.
I've been using it for less than 2 months and it looks parenthesis good and sounds good all around! 。 Booming sound when SHIFT UP (Fuel Cut sound?) is also good in Race ish.
Idling sound is slightly Large fine-grained when it's cold.
View detail
Fits: YAMAHA YZF-R25, YAMAHA MT-25
Two-cylinder Full Exhaust System
yzfr25 (19) I installed it in
I leave the installation to the shop.
Therefore, I don't know the amount of time, difficulty, or care that goes into installation. Sorry.
[Acceleration]
The acceleration compared to the OEM is honestly not clear to the layman.
[Sound]
The sound is very different, you can tell the moment you engage the Engine. The bass sound is more pronounced. The sound of the sound depends on personal sensibility, but I like it.
[Notes]
One thing to keep in mind is that fingerprints and other stains are easily visible. It can be removed by wiping with a damp cloth and a dry towel, so it is not a problem, but it is a matter of concern.
View detail
The height of the Rear was raised and it became like the position of SS.
I bought the Gold color because it is a premise for OHLINS. Personally, I wanted the Black color, but I didn't have a choice. The installation is no problem. The footing is not so bad, but the Position is good. I don't think it is enough for Winding Level, but it is not enough for Circuit. View detail
Parenthesis good at best.
I've seen a lot of covers that say cb400, but I was worried about accuracy and overheat, so I went with this one.
As expected of BEET, the price is … but the construction is very good.
Fitting was no problem at all!
A mere Cover costs nearly 20,000 for a mere Cover, it's more expensive than a YOSHIMURA! I thought it was a good idea, but I'm glad I bought it as a result, lol.
View detail
Amazingly high quality
It is a little loud during ColdStart, but after warming up, Idling is a little bigger than OEM. It's about as loud as it gets. But when the rotation comes up, it makes a pretty good sound.
The point of concern is that if you SHIFT UP with the Automatic shifter when rotating low ‘‘bob! ‘‘ and sound. Why is that?
View detail
The installation was done by a motorcycle shop.
Oh no, it's great.
At Idol, is it the same as OEM? And I was laughing with General Large of the Motorcycle shop …
I'd say it runs, or rather, sounds amazing when I open Axel.
The sound of the blibber when you change during Quick Sistar is amazing.
Installation is 3 stars because I didn't do it myself.
Cost performance is different for everyone, so I gave it a 3. Compared to the AXIS Lapo 850,000 of Doca's Strike Fire, it might be the strongest in cost performance.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX)
The product is very well made, but
The description said the ride height would not change, so I bought it, but when I took off the normal plate and compared it with the normal plate, it was one hole shorter, so I thought it might be possible, and then the ride height was lowered! View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z800, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Z800
high
Installation was super easy.
It looked perfect.
Since the only fixed part is the lower center part
Both corners of the lower part, Left was good.
The Right corner was floating and flapping around.
I also felt the price was a bit too high.
View detail
It is a solid fabric.
It's a thick and sturdy fabric and can hold heavy items. I love the BEET with LogoBag that can be carried in my hand or as a shoulder bag. Recently, I have been using it as my Eco Bag. View detail
It's looking good!
I disliked the OEM Handlebar because it was too far and wide for my short stature and it looked like it was hanging around.
We've introduced this product because a lot of people have put it on and it seems to be well received!
Depending on your preference, isn't this the OEM? It's so much easier to ride! LOL!
We recommend it for short men and small patterned female riders.
View detail
It's not here yet, but... ・ It's not a product, it's a complaint.
The first order was placed on October 7 and the price was $159,005 for the December 23 shipping date.
ChristmasPresent! I was just about to go into it.
A few days later, I looked at the Site and it was marked as SALE 150,480
No, no, it's about 10,000 yen cheaper.
I contacted them on October 9 and they told me to cancel and reorder
I reordered it at and they said it would be delivered on January 12, 2021.
You're welcome.
I feel like I don't really care anymore.
Do I have to buy it if I find it at Lycos or something?
View detail
easy to stick to
Because it is a heat-resistant Sticker, it can be attached to Silencer, and the silencer of BEET becomes more parenthesis good. The fastest itself is also parenthesis good and I like it. View detail