Reviews
Cool
It gives the feeling of an old car. Cool!
The work takes about 5 minutes, including the replacement of KIJIMA's Pulsar Cover.
Screw locker is required.
View detail
Used for ZX-4R
I found the same part number for ZX-4R on the official BEET website, so I bought it. I think it is meaningful.
For general use, would it work as protection on highways?
I've worn them on other motorcycles I've ridden, but performance is secondary because I'm after looks.
View detail
It is easy to install.。
The Design was the best of many.
Core guard should be attached.
View detail
Wow that's cool
I decided on BEETJapan because they had the best design. View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
Cool without question!
If you have the tools, you can install it, but if you are worried, ask the Shop to do it for you!
Looks pretty Cool!
Gasket is not included.
View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
Cool
BoltQuantity with Packing:Finish with 2pcs.
It is austere and cool.
View detail
Nice finished made
Perfected finished made nice colour It can definitely protect the water tank The "beet" logo can be highlight of the bike View detail
Fits: KAWASAKI ZX-14R, KAWASAKI 1400GTR, KAWASAKI ZX-14R, KAWASAKI 1400GTR
It's cool
Since the Exhaust System is BEET, the RadiatorCard is also BEET.
It's not a prominent component, but the glimpse of BEET's Logo is cool!
Of course, the Radiator is not easily scratched, and the water temperature does not change before and after installation.
View detail
One point・Dress-up
From the front, the OEM had deteriorated considerably and was replaced.
YOSHIMURA is also available, but since it is Kawasaki, it is BEET.
The price is a bit steep, but I'm glad I put it on.
A must if you want to have it in BEET.
Parts, Bolt On, so it is easy to install.
Recommended
View detail
Fits: KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS, KAWASAKI ZEPHYR X, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR750RS
Insufficient strength
The upper mounting Bracket part broke cleanly after only a short drive after installation. There is a quality problem. View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
One point
I bought it as One point. I used YouTube as a reference when I replaced it, but first of all, when I removed the Normal cover, it did not come off easily, and I managed to remove it by prying. Next, a problem occurred:the coil attached to the cover was not removed easily, and it was finally able to be removed by the principle of Lever wearing Pipe on Hexagonal Wrench. If it came to this point, it was possible to install it easily even for an amateur because it only had to clean up the trace of the Gasket and install it. The appearance also changes, and it is quite Parenthesis good in the tightened feeling. It is self-satisfaction, but... View detail
Fits: KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Z400GP, KAWASAKI Z400FX/Z400J, KAWASAKI GPz400F/F2
One point
I bought it as One point. It is self-satisfaction...) View detail
If only the prices were a little lower!
I did not plan to install the Radiator guard at first, but I thought it was too late after the Radiator was broken because the standard TireS22 of NINJA1000sx rolls up gravel unexpectedly, so I bought it.
When I purchased this product, I considered other manufacturers, but I felt it was a little expensive, but I bought this product because I liked the design.
As you may have seen in other people's impressions, it is troublesome to have to remove the Cowl, and the anti-vibration rubber at the place where the Bolt is fixed on the lower side does not hit between the Radiator and the Guard as it is, so I processed it in my own way and installed it.
To be honest, I don't know the effect of installing it, but I think it's better to have it as insurance.
If you look at the Single Body, the Logo of BEET is Parenthesis good, but if you install it, you can't see it unless you look into it, so there is a point where you feel that 20,000 over is high to be honest, but I think this is the best among those sold now, and I like it.
View detail
Cool!
I did not remove the Cowl and worked on it.
I worked carefully to avoid damaging the Cowl.
I don't know why it's the fastest.
It's cool, isn't it?
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX400
BEET
For the Engine dress-up!
kawasaki means BEET!
View detail
BEET
For the Engine dress-up!
When I say kawsaki, I mean BEET!
View detail
Thank you BEET!
Thanks BEET for putting out one for the ZrX! View detail
Fits: KAWASAKI KLX250, KAWASAKI D Tracker
I'm glad we switched.
After replacing the exhaust system, the low to mid RPM response was eliminated and the car started to run better. I was very impressed with the effect of the replacement.
The replacement process was done without Trouble in about 30 minutes with the help of reports from experienced people. Thanks!
View detail
SmallThe first Custom before the stone flies
Buy it before it gets dented by Small stones.
The only BEETItems on my zx25r
View detail
Fits: KAWASAKI ZRX400II, KAWASAKI ZRX400, KAWASAKI ZRX400II, KAWASAKI ZRX400
Point cover installation
I installed it on my ZrX400?
He said it was put on by a previous owner.
The Wound of the Point cover that seems to be
I was wondering.
I'm very happy with it
I suddenly had a sense of Custom.
View detail