Reviews
[Note] Structurally, it is not removable.
The position will be better, but due to its structure, once it is installed, it cannot be removed (the handlebar cannot be removed either), so those who are considering purchasing should assume that they will not have to remove the handlebar again.
Quantity:1pc. (6mm) I purchased the Bolt/Nut for the aperture positioning, but after installation, the Bolt/Nut is spinning out of position.
Bolt side is outside because it is sandwiched inside (Nut side) Since only the Bolt side can be accessed, it is not possible to fix the Bolt side and remove the Nut, and the Nut and Bolt will spin together and cannot be removed.
As long as this Nut cannot be removed, the Handlebar itself cannot be removed.
If you want to remove the nut, you have to destroy the bolt with a bolt clipper, but since the bolt is used from an OEM unit, you will not be able to ride the motorcycle until you obtain a bolt, since you will not be able to install a handlebar if the bolt is destroyed.
It is a fatal design error.
If you must install it, it may still be possible to remove it by gluing the positioning Bolt, so you may want to try to remove it later when you install it.
View detail
Maybe it's not as different as I thought...
I changed to a high seat to reduce the pain in the buttocks, so I raised the handlebar by 12mm to increase the handlebar a little because my wrists also hurt when I lean forward.
It might be easier with Normal seat. I will try to ride back to Normal seat once.
Because Owner says it has changed a lot on YouTube.
View detail
A little more Position is ….
I am an old man who switched from ZZr-1400 to NINJA1000SX. The handlebar is a little higher and narrower on the inside, which makes it easier on the outside of the arms and also improves the footing. I think you should consider this product if you are looking for something a little more comfortable. If you are looking for something a little more comfortable, why not consider this product? View detail
Old car style custom and can be used for CB1100!
[How is it used?
The NORMAL Handlebar Clamp was unadorned, and I wanted a Gold and Retro-chic Clamp.
Was the one you received as per Image?
I think it is more massive and has a higher quality than the Image.
Above all, BEETLogo motivates me.
Was the installation difficult?
It is Bolt On, so there is no problem.
However, if Attachment is used in Mountetc., it cannot be installed.
How was your experience with it?
I have not put it on properly because I am currently using Navigation, but it is solidly built and from the shape, I would expect it to be as stable as Stabilizer.
[Included Parts:were they on?
Instruction Manual, screws and stickers required for installation are included.
[Was there anything that disappointed you?
Not particularly
I was worried about the color of ▼, but I chose Gold because Gold parts are used in some parts, and the Handlebar area looks gorgeous.
View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX)
Pipe Handlebar Kit
It's a simple process of removing the Normal Bundle and placing it on top of the Normal top bridge. If you are able to inspect and maintain it on a daily basis, you should be able to do it in no time. The only problem is that since the top bridge is covered, it's a little hard to insert the key and turn it around. View detail
If you have a Small pattern, please try it!
I really liked the ability to narrow the aperture angle of the Handlebar.
I don't think it has much effect on me since I am 6mm up, but the slight narrowing has made it much easier for me, a small person with a small body, to ride.
View detail
Too expensive.
Prices are quite high.
Worst.
Worst.
View detail
That's so nice. (≧∇≦) b
Sports-type motorbikes and touring bikes put a lot of strain on the wrists and cause fatigue in the arms, shoulders, and neck.
I wanted to do something about it, so I looked on the Net and found Spenser, which allows you to easily change the position of the handlebar!
I took the plunge and purchased and installed 12mm. It dramatically changed the position of my hands and made driving easier.
I'm glad I bought it.
It can be easily installed by removing the hexagonal screws!
View detail
My posture is much easier.
I installed it to tighten the handlebar, rather than to upgrade the handlebar. It was easy to install because it is a special product. I tightened it with the specified torque. View detail
Installed on Ninja1000 2018
If you read the instruction manual, you can install it in less than 30 minutes, but it is better to have a proper PRO install it to be on the safe side. I think I could improve the position of the tank. View detail
Hayabusa riser
Item received in good condition and same as the picture. It fixed nicely on my bike. I will recommend and buy again from the seller.About quality and texture is good. View detail
BEATHandlebar ClampBrace
Large size is more powerful and impactful than I expected. View detail
Position is now easier.
Installed to improve position. The forward leaning posture was eased and long distance touring became easier.
Installation is also easy with Bolt On.
View detail
It's going up quite a bit.
Buy 12mm Up
I thought that wearing a high seat would be hard on my body and wrists.
I chose 12mm because I didn't want the effect of 6mm to be too weak, and I think it changed a lot.
Now I am using it in Normal seat as I am checking it.
(It's harder to lean forward.)
Installation is easy, but loosening the Bolt sideways may be a Large oddity.
(There's no work space and it's pretty solid.)
The dish screw is attached to the handlebar, and changing the direction of the handlebar is also supported.
However, because it is no longer pimped out?
I think it is almost impossible for a beginner to do that part of the work.
The price of the Neck is high, but it is supposed to be a dedicated product? I can't help it.
View detail
beet handle pressing code
The BEET brand has two kinds of screws with Japanese characteristics, and the matching degree is very high. The colors are optional, black and white, gold and white, gold is still too high-profile. The BEET brand has Japanese characteristics. Two kinds of screws have a high degree of matching. The colors are optional, black and white, gold and white, gold is still too high-profile. Buy another black and white next time View detail
Might make it easier to ride.
I used it because it was too hard to lean forward with the OEM.
Are you feeling better somehow?
View detail
A slight change.
Switch from NAKED and make Position a little easier.
I bought the 10mm, but because there was no difference between the 5mm and the Large.
Currently using 5mm up. Slight change, but fatigue is a little better.
It is a feeling. Bolt of the attachment, it is a little long, but I can use it as it is.
Please understand that it is only a personal difference.
View detail
It's a lot easier!
It takes about 20 minutes to install with H2SXSE+. Before the install, my wrists and lower back would get sore and tired after riding for a long time, but with the 10mm increase, it eases the pain. I switched from a Ninja 1000 to a H2SXSE+ and after a long ride I felt the need for a Handlebar Up Spacer. I'm glad I did. I wish the price was a little lower. View detail
My posture is much easier.
I used to use 10mm Spacer of other Manufacturer, but I found 12Up Spacer and bought this one.
It is 2mmUp from the last time, but my posture became easier.
Long touring has become easier.
It's less than 10,000 yen, so if you're worried about your posture, give it a try.
View detail
12?Up
I used to wear a 6mm Up, but it was still hard to lean forward, so I went with the 12mm, but I'm worried about my lower back and hips getting used to it. View detail