Reviews
Yamamoto clamp
As always my upgrades come extremely well packaged,I fitted the clamp in minutes and the outcome is perfect,the fit is correct and quality of the clamp is great View detail
Expensive, but I'm satisfied.
I am looking forward to the compatibility with SPEC-A in Yamamotracking without a doubt. View detail
Fantastic
I am very happy from quality of the product. This look really good View detail
Purchased because Fork Guard can be used in conjunction with it.
Installation was easy and cost-effective, and the front of the car feels tighter. (Personal feeling) 。 View detail
Parenthesis I got better.
I was concerned about the interference with the Fender, but it was no problem.:I finally succeeded in displacing it by hitting it with a SetHammer. After the displacement, Garbage was piling up and it was unstable, so I ended up installing an external Fork Guard. I recommend that you cut it off and install an external one.
The chatter sound of the 1300SB HALF COWL is now LARGER, but I don't know how it sounds because I haven't driven it on the mountain pass yet.
But I am happy with the improved appearance.
I think the sense of ownership will go up, I can feel good about the ride.
View detail
Excellent finish and easy to install
Yamamotos carbon fibre front fender is easy to install within ten minutes and looks fantastic. The fit is perfect. And it weights nearly nothing. Highly and absolute recommended View detail
Fits: HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF
Looks good but does not fit european model
The overall quality of the guard is very good. Good materials and finish. But obviously the radiator of the european modell is twenty millimeter wider than the japanese model. So i had to disassamble the core guard and combine the yamamoto guard and the standard guard. Now it fits the european model. View detail
Great Look and easy to install
Yamamotos carbon fibre front fender is easy to install within ten minutes and looks fantastic. The fit is perfect. Absolute recommanded View detail
Amazing Yamamoto passenger footpegs
This Yamamoto passenger footpegs are really amazing! Very well done and extremely aggressive! They give a new look to my CB and the silemcer is higher! Much apreciated! View detail
Refreshingly, the front area looks sharp.
I felt a heavy feeling around the front and I decided to buy this product. It was very easy to install. The front side is a Rubber Bush type nut so I am not sure if there is a problem but if you re-tighten it often, there is no problem. View detail
Intake efficiency is good!
Full Exhaust System, Full power, so I changed it.
It's a red color, but it's hidden by the side cover and it's a little wasteful.
If you want to put it on, you may try to make it look more fashionable with the side cover as well, because it can be used as one point color depending on the processing.
View detail
Separate handle is now SMART
Installation and accuracy
I don't know the details as it was installed at Shop, but it seems to be exquisitely placed and shifts a bit and Lever seem to interfere with Cowl/Tank
But if you get into it properly, the Best Fit is perfect Accuracy is no problem at all, and I had no Gap at all after almost 3 years of wearing it You can rest assured that it is not
Quality and texture
The bar itself is recommended to be painted as it has a matte black texture and looks like it's been left bare
I assembled it without painting it myself, so the rust is floating around
?shape
It changes considerably from the original riding position
However, the Separate handle is never too tight, and the Long There's enough room to handle touring as well
In my case, the attitude was pretty easy because I was combining it with Striker's Rear Sets
Separate handle on the OEM footpeg may feel a little tight Mm
The feeling of use
I use it for Circuit, Touring, and various applications, but it's a little bit different with Circuit The Handlebar position felt high
In the first place, for RacingSeparate handle is also available, so I think you should buy that one
If you're an EnJOYCircuitUser, you can use the Handlebar to play Circuit with no problem I think you'll enjoy it
・Cost performance
It's very expensive because it's dedicated Parts for SB
However, if you install it firmly, you can get a sense of unity like the parts that come with the OEM It is available
To begin with, since there are not many users who are riding CB1300 with Separate handle If you go to MotorcycleEventsetc. you get a lot of stares …
I wanted to make the position more relaxed than the SS, but more aggressive than the Tourer I think this is the perfect party for those who are
It was an expensive expense, but I personally feel glad I installed it
View detail
Engine is in good condition!
Full Exhaust System After exchanging for a while NORMAL I was riding with inspiration but at low speed, the fueling time at acceleration was good, but after replacing the Funnel, the engine suffered a lot of intake Air conditioning is good. Growth of high rotation is also improved. View detail
YAMAMOTO RACINGYamamoto racing Carbon
The quality of the product is without complaint, the drift is feeling like Yamamoto racing ♪ The attachment was attached without problem especially.
It is a Carbon Material and it is much smaller than OEM, it is lighter in appearance and looks Sporty Image.
Only OEM's Brake hoseBracket can not be used, and other Bracketetc. Since we have to prepare, we have made four stars (__) m
View detail
Yamamoto racing OK
Manufacturer is also my favorite Manufacturer
I installed Front fender
A part of wiping is better than when there is nothing
It became hard to do, but Front fender
To the thing where height drops to Tire Suleres
It seems that there is no problem because it is a replacement schedule.
(Installed in 2012 year)
View detail
[Webike Monitor] It attached to 09 MODEL and CB1300SB. It is combination with a infinite Step, and infinite Steps are a 20-mm Up and a 20-mm Back. Step brackets are an 8-mm Up and a 32-mm Back, and became a Position called a total of 2
[Webike Monitor] It attached to
09 MODEL and CB1300SB.
It is combination with a
infinite Step, and infinite Steps are a 20-mm Up and a 20-mm Back.
Step brackets are an 8-mm Up and a 32-mm Back, and became a Position called a total of 28-mm Up and a 52-mm Back.
The reason for having equipped with the
Step bracket is for not carrying out contact with road surfaces, such as a Pedal by angle-of-bank increase, a premise [ setting a Tire to 190 from 180 ] with Wheel exchange.
Moreover, although the purchase of the Back step was put into the visual field, the cheap Step bracket was attached on the problem of the budget.
Although the Back became tight, since the
Position is a Motorcycle which rides easily from the first, it has not been worried specially.
However, there is two problem.
The 1st interference of the DLC Titanium-full-exhaust catalyst part of a Nojima and a Brake pedal is mentioned.
Although not interfered in the state where it is not operated, it contacts, when it breaks in.
The 2nd die length of a Change-pedal ROD is lacking.
I had the ROD made from an One-off.
Since it is about 3000 yen, we recommend you that I have you make.
Incidentally, by my Position, the ROD was made at 220 mm and it was attached finely.
It is a product with very sufficient structure.
Since it is made according to the form of a Normal step, at an infinite Step, there is a portion which is missing at a sense of togetherness, but it is individually pleasing.
It was good to attach.
View detail
Although it was racy for appearance and was that of the Cool, the heart of make [ in an honest Swing arm / a hole ] throbbed. If attached without processing, I will think that it was still better.
Although it was racy for appearance and was that of the Cool, the heart of make [ in an honest Swing arm / a hole ] throbbed. If attached without processing, I will think that it was still better. View detail
It attached to 05CB1300SB. Since it only fixed with the bolt, wearing was not so difficult and it carried out it. The position can also manage long-distance touring comfortably as low as it considered for a separate handle. If a separate handl
It attached to 05CB1300SB.
Since it only fixed with the bolt, wearing was not so difficult and it carried out it.
The position can also manage long-distance touring comfortably as low as it considered for a separate handle.
If a separate handle is heard, it tends to be reminded of hard inclined attitudes like super sports, but it is the touch which made the normal handle somewhat low.
Structure compares with the product of the other company, or becomes, and is strong structure.
Although evaluation wants to go with five star, since the price is slightly high, I will make it into four star.
View detail
By wearing of the rear glove cover, the circumference of rear one became the impression felt refreshed (^^) As for an effect, petit custom-made one is large! Since the glove bar of normal is removed and it only fixes with an attached bolt, attachment is d
By wearing of the rear glove cover, the circumference of rear one became the impression felt refreshed (^^) As for an effect, petit custom-made one is large! Since the glove bar of normal is removed and it only fixes with an attached bolt, attachment is dramatically easy.
Therefore, evaluation is five star without a complaint.
View detail
The impression with which it equipped is quite lightweight at the product made from FRP as compared with a normal upper cowl. Incidentally a normal upper cowl weighs about 6 kg. After all, since it is a durable cowl, it is quite racy and a parenth
The impression with which it equipped is quite lightweight at the product made from FRP as compared with a normal upper cowl.
Incidentally a normal upper cowl weighs about 6 kg.
After all, since it is a durable cowl, it is quite racy and a parenthesis is good.
Since a white gel did not paint this product probably about attachment, it is necessary to paint.
Moreover, alignment is performed and hole processing to a cowl, etc. are needed.
Except [ it / with knowledge or technology / that therefore, it is better to leave attachment to a pro ]
He left it to the pro after my also purchasing.
Since attachment requires time and effort although it may be natural, I will make it into four star.
View detail